• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.191-197
• /
• 2015

We investigated the physicochemical properties and volatile flavor compounds in Taiwan Apple Mango (TAM) and Philippines Carabao Mango (PCM). The volatile flavor compounds were extracted using solid-phase microextraction (SPME) and analyzed by GC/MS. TAM and PCM have significantly different chemical composition, except for their crude ash. The moisture and crude fat contents were higher in TAM, whereas the crude protein and carbohydrate contents were higher in PCM. The major free sugars in order of concentration were sucrose, fructose, and glucose. We identified 56 and 59 volatile flavor compounds in TAM and PCM, respectively. Terpenes and their derivatives comprised 94.42% of the volatile flavor compounds in TAM, but only 63.79% of those in PCM. The acidic compound contents were higher in PCM than in TAM. ${\delta}$-3-Carene was the dominant flavor compound in these two mango cultivars. ${\alpha}$-Copaene, ${\alpha}$-guaiene, germacrene D, ${\alpha}$-bulnesene, and ${\gamma}$-gurjunene were found only in TAM, whereas ${\beta}$-myrcene, ${\alpha}$-phellandrene, ${\beta}$-phellandrene, ${\alpha}$-terpinolene, and cis-3-hexenyl butyrate were identified in PCM. Based on the results, we suggest that these compounds might contribute to the distinguishing flavor properties in different varieties of mango.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.227-235
• /
• 2001

In this work, Zn$_2$SiO$_4$:Mn phosphors were prepared by solid state reaction. The effect of sintering/reduction temperature, flow rate of H$_2$-5%/$N_2$-95% mix gas, and ball milling conditions have been investigated on the sake of PDP(Plasma Display Panel) application. The characteristics such as particle morphology and photoluminescence of prepared phosphors were compared to those of commercial Zn$_2$SiO$_4$:Mn Phosphors. It was found that the Phosphor synthesized at 130$0^{\circ}C$ with 0.08 Mn concentration had a maximum brightness, This brightness was increased more 20% by reduction treatment under 100me/min flow rate of 5%H$_2$-95%$N_2$ mixed gas. The size of particles decreased under 3$\mu\textrm{m}$ after ball milling. Especially, higher luminescence was obtained in our Zn$_2$SiO$_4$:Mn phosphors than commercial Zn$_2$SiO$_4$:Mn phosphors, so that they are able to be applied for PDP.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.465-471
• /
• 2001

The effect of sintering condition on the mechanical properties and leachability of polydispersed ceramic core body made by gel-casting process in aqueous medium have been investigated. The polydispersed ceramic slip that has low viscosity($\leq$1000cP, at 1000cP (at $50sec^{-1}$ ) and high solid loading(50vo1%) was obtained. The green bodies were fabricated through casting and gelation at room temperature followed by drying at $25^{\circ}C$for 48hrs under relative humidity of 80%. Crack-free green body was successfully fabricated through the above process. The strength at room temperature, apparent bulk density, and shrinkage of the ceramic core body increased propotionally with increasing sintering temperature(1100~150$0^{\circ}C$). However, porosity of the ceramic core body showed relatively low vague. Leaching rate of sintered core body increased with increasing porosity of the sintered body, and was significantly dependent upon the concentration of alkali caustic solution at the same leaching temperature.

• Korean Journal of Microbiology
• /
• v.54 no.2
• /
• pp.105-112
• /
• 2018

To compare the denitrification efficiency, this study used molasses and methanol were used as external carbon sources. Specific experimental conditions were classified according to C/N ratio conditions. The batch test showed that the denitrification efficiency increased as C/N ratios of molasses and methanol rose. The most suitable C/N ratio of molasses turned out 4:1 considering the concentration of the residue chemical oxygen demand (COD) and the denitrification efficiency, which was 91.4%. Specific denitrification rate (SDNR) drawn as a kinetic factor demonstrated that molasses and methanol showed similar SDNR values as C/N ratios of molasses and methanol increased. Under the condition of C/N ratio 4:1, 0.0292 g $NO_3{^-}-N$ removal/g mixed liquor volatile suspended solid (MLVSS)/day (molasses), 0.0299 g $NO_3{^-}-N$ removal/g MLVSS/day (methanol) were found. Sludge adapted to molasses showed that Bacterium Pseudomonas sp. and Bergeylla sp. dominated through an analysis of microbial community. In addition, some bacteria were high convergences than the variety of microbial community. Accordingly, it was assumed that molasses focus on growing microorganisms specialized in denitrification and applied as a replaceable external carbon source that can enhance denitrification performance.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.242-248
• /
• 2007

For an optimal design of automotive electric system, it is important to have a reliable modeling tool to predict the charge-discharge behaviors of the automotive battery. In this work, a two-dimensional modeling was carried out to predict the charge-discharge behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experimental data of the charge-discharge behaviors of a lead-acid battery. The discharge behaviors were measured with three different discharge rates of C/5, C/10, and C/20 at operating temperature of $25^{\circ}C$. The batteries were charged with constant current of 30A until the charging voltage reached to a predetermined value of 14.24 V and then the charging voltage was kept constant. The discharge and charge curves from the measurements and modeling were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, the porosity of the electrodes, and the current density within the electrodes as well as the acid concentration can be predicted as a function of charge and discharge time.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.87-92
• /
• 2009

The antioxidant properties and protective effects of Inula britannica on ${H_2}{O_2}$-induced SH-SY5Y neuroblastoma cell damage were investigated. A series of solvent fractions, including hexane(Fr.H), petroleum ether, chloroform, ethyl acetate(Fr.EA), and water fraction(Fr.W), were prepared from the 70% methanol extracts of Inula britannica. Fr.W had the highest total contents of phenolics and flavonoids, followed by Fr.EA. The antioxidant properties of the fractions were also evaluated by analyzing their scavenging activities on 1,1-diphenyl-2-picrylhydrazyl(DPPH) radicals, 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radicals, and nitric oxide. Fr.W showed the strongest activities in all assays. The concentrations of Fr.W that resulted in 50% reductions of the DPPH and ABTS radicals were 20.7 ${\mu}g$/mL and 39.4 ${\mu}g$/mL, respectively. Fr.W showed the weakest cytotoxic activities on the SH-SY5Y cells, whereas it effectively protected ${H_2}{O_2}$-induced cell death, increasing cell survival by 35.0-77.0% at a concentration range of 62.5-250 ${\mu}g$/mL. In this range, Fr.W also significantly decreased intracellular ROS levels by 34-39%. Overall, the antioxidant properties of Inula britannica can contribute to rescuring neuronal cells from oxidative stress-induced cell injury.

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.355-361
• /
• 2009

Polycyclic aromatic hydrocarbons (PAHs) are environmental carcinogenic compounds that arise by several means including food processing methods such as smoking and direct drying and cooking. This study examined the concentration of PAHs in sesame oils with various roasting temperatures (190, 220 and $250^{\circ}C$), methods (direct heating vs. indirect hot air heating), and times (5, 10, 15, 20 and 25 min). The PAHs in the sesame oils were analyzed using liquid-liquid extraction and solid-phase clean up (Florisil), followed by HPLC with fluorescence detection. According to the results, mean levels of total PAHs increased when the sesame oils were roasted at increasing temperatures and times. The sesame oil roasted at $250^{\circ}C$ for 25 min had the highest mean value of total PAHs (4.66 ${\mu}g$/kg). The results of this study suggest that the indirect hot air roasting method decreased PAH formation during sesame oil processing.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1196-1201
• /
• 1997

As a basic study to develop low-salted fermented anchovy, rates of salt penetration into anchovy muscle, patterns of protein degradation and changes in water activity and transfer was analyzed after brining at various salt (NaCl) concentration. The salt penetration curves followed first order. kinetics. The rate constant (k) increased from 0.018 (10% NaCl solution) to 0.051 (saturated). Water activity was reduced from 0.93 (10% NaCl solution) to 0.77 (saturated). Protein degradation during brining was Somewhat occurred in 10% NaCl solution but not in satutrated solution. Water content of anchovy muscle were 74% (w/w), 65% and 58% when 10%, 20% and saturated NaCl solution were used, respectively. This result indicated that as NaCl content of brining solution was increased, the amount of water transfer also occurred. Weight of anchovy increased at 10% NaCl solution and decreased at 20% and saturated NaCl solution. The loss of anchovy solid mash during brining was calculated as 30% after 36 hr brining.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.4
• /
• pp.258-263
• /
• 2004

Bioassay was employed to assess toxicity of soil which had been treated with sewage sludges for seven years. The $Microtox^{(R)}$ and root elongation test of lettuce (Lactuca Sativa.) elucidated that the intensity of soil toxicity was closely related with the types and amount of sewage sludges applied. Both bioassay methods proved to be useful in an assessment of soil toxicity and were consistent to some extent with the conventional chemical analysis methods. $EC_{50}$ values resulted from $Microtox^{(R)}$ were highly correlated with concentration of heavy metals in soils amended with sewage sludges : Cu ($r^2=\;0.86^{**}$), Cr ($r^2\;=\;0.84^{**}$), Ni ($r^2\;=\;0.83^{**}$), and Zn ($r^2\;=\;0.69^{**}$). This demonstrated that both bioassay techniques could be employed as tools for soil toxicity assessment when the soil was exposed to solid wastes such as sewage sludge.

• Applied Biological Chemistry
• /
• v.22 no.4
• /
• pp.191-197
• /
• 1979

${\beta}-Tyrosinase$ was purified and crystallized from cells of Escherichia intermedia A-21 grown in a medium supplemented with 0.2% L-tyrosine. Molecular weight of its subunit, Km value and absorption spectra were determined. Crystallization methods were also studied to eliminate any unnecessary procedures. The results obtained were as follows: 1. The purification procedure included ammonium sulfate fractionation, dialysis against potassium phosphate buffer, pH 6.0 and pH 7.0, and DEAE-Sephadex column chromatography. In the column chromatography, 11 mg of protein was applied per ml of DEAE-Sephadex for efficiency. 2. Steps of protamine sulfate treatment and Sephadex G-150 gel filtration could be eliminated for this enzyme from the known procedures. 3. The purified enzyme was dissolved in 0.01M potassium phosphate buffer containing 2-mercaptoethanol, with a concentration of 20mg/ml. Crystalline enzyme, which appears as hexagonal rods, was obtained by adding solid fine powdered ammonium sulfate to the enzyme solution. 4. Absorption maxima of the enzyme appeared at 340 and 430nm when associated with pyridoxal phosphate. 5. Km value of the enzyme for L-tyrosine was $2.31{\times}10^{-4}M$ and the molecular weight of its subunit was determined by SDS-polyacrylamide electrophoresis to be approximately 50,000.