• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.535-541
• /
• 2008

Pine mushroom (Tricholoma matsutake Sing.) is an expensive and highly prized delicacy in Korean and Japanese cuisines with its unique flavor and functional properties. The biological activities of pine mushroom juice (soluble solid contents $4.3^{\circ}$Brix) were evaluated using different tests; DPPH radical scavenging assay for its antioxidant activity, fibrin plate method for fibrinolysis and angiotensin I converting enzyme (ACE) inhibitory activity for anti-hypertensive effect. Free radical scavenging activity of the pine mushroom juice was $48.3{\pm}2.2%$ at the concentration of 1.0 mg/mL. The fibrinolytic activity of pine mushroom was about 2 times greater than that of plasmin used as positive control and the activity increased dose-dependently. The pine mushroom juice inhibited ACE activities dose-dependently and $IC_{50}$ value of ACE activity was $1.03^{\circ}$Brix. These results suggest that pine mushroom is a healthy delicacy.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.2
• /
• pp.13-20
• /
• 2009

There have been increasing interests in the odor generation problems as concerns about the quality of life has been increased recently. Especially, approximately 67% of the odor complaints from environmental facilities are those from sewage treatment facilities and food waste treatment facilities. Moreover, sewage ocean dumping will be prohibited from 2012 by the international and domestic ocean laws, and thus, demand for alternative management plans is increasing. Therefore, it was first selected 5 sewage treatment facilities and 5 food waste treatment facilities where the amounts of waste are relatively immense in Busan, and collect their sludge samples. Then it was investigated the samples' physical and chemical characteristics through proximate analysis, elemental analysis, XRF analysis, and calorific value analysis. Finally, estimate the $H_2S$ emission rates were estimated in order to apply the results as the basic data for providing the fundamental solution for the oder complaints. As a result, the concentration of $H_2S$ in sewage sludge and in food waste treatment facility were 57.3 mg/kg and 19.7 mg/kg in average, respectively. Finally, the units of $H_2S$ in wastes stored in total 10 waste treatment facilities was estimated 16,017,910.0 mg/d.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.7
• /
• pp.1077-1081
• /
• 2016

Feasibility of incorporation of licorice powder (LP) as a value-added food ingredient into convenient food products was investigated using yanggaeng as a model system. LP was incorporated into yanggaeng at amounts of 0, 2, 4, 6, and 8% (w/w) based on total weight of cooked white beans and LP. pH level decreased while soluble solid content significantly increased with increasing levels of LP (P<0.05). In terms of color, lightness decreased while redness and yellowness increased significantly (P<0.05) with increasing levels of LP. Hardness also decreased significantly with a higher amount of LP in the formulation (P<0.05). 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) and 2,2'-diphenyl-1-picrylhydrazyl radical scavenging activities were significantly elevated by LP addition, and they increased significantly as LP concentration increased in the formulation (P<0.05). Finally, consumer acceptance test indicated that the highest levels of LP incorporation (8%) had an adverse effect on general consumer preferences. In contrast, yanggaeng with moderate levels of LP (2%) is recommended based on its overall scores to take advantage of the antioxidant properties of LP without sacrificing consumer acceptability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.11-11
• /
• 2008

ZnO has a very large exciton binding energy (60 meV) as well as thermal and chemical stability, which are expected to allow efficient excitonic emission, even at room temperature. ZnO based electronic devices have attracted increasing interest as the backplanes for applications in the next-generation displays, such as active-matrix liquid crystal displays (AMLCDs) and active-matrix organic light emitting diodes (AMOLEDs), and in solid state lighting systems as a substitution for GaN based light emitting diodes (LEDs). Most of these electronic devices employ the electrical behavior of n-type semiconducting active oxides due to the difficulty in obtaining a p-type film with long-term stability and high performance. p-type ZnO films can be produced by substituting group V elements (N, P, and As) for the O sites or group I elements (Li, Na, and K) for Zn sites. However, the achievement of p-type ZnO is a difficult task due to self-compensation induced from intrinsic donor defects, such as O vacancies (Vo) and Zn interstitials ($Zn_i$), or an unintentional extrinsic donor such as H. Phosphorus (P) doped ZnO thin films were grown on c-sapphire substrates by radio frequency magnetron sputtering with various Ar/ $O_2$ gas ratios. Control of the electrical types in the P-doped ZnO films was achieved by varying the gas ratio with out post-annealing. The P-doped ZnO films grown at a Ar/ $O_2$ ratio of 3/1 showed p-type conductivity with a hole concentration and hole mobility of $10^{-17}cm^{-3}$ and $2.5cm^2/V{\cdot}s$, respectively. X-ray diffraction showed that the ZnO (0002) peak shifted to lower angle due to the positioning of $p^{3-}$ ions with a smaller ionic radius in the $O^{2-}$ sites. This indicates that a p-type mechanism was due to the substitutional Po. The low-temperature photoluminescence of the p-type ZnO films showed p-type related neutral acceptor-bound exciton emission. The p-ZnO/n-Si heterojunction LEO showed typical rectification behavior, which confirmed the p-type characteristics of the ZnO films in the as-deposited status, despite the deep-level related electroluminescence emission.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.202-207
• /
• 2016

The effects of $SO_2$ generating pads ($SO_2$ 0, 0.5, 1, and 2 g/kg) on the quality of dried persimmons slices were investigated. The $SO_2$ generating pads for storage did not affect to weight, moisture loss rate, and soluble solid contents of dried persimmons. The color change(E) after storage for 12 weeks was the highest (value = 3.5) in control ($SO_2$ 0 g/kg), whereas that was the lowest (value = 2.6) under $SO_2$ 2 g/kg condition. When we measured the browning degree after 12 weeks, they showed O.D. 0.15, 0.14, 0.10, and 0.05 in serial dilution treated pads with $SO_2$ 0, 0.5, 1, and 2 g/kg, respectively. The decaying rate was the highest (9.0%) in control after 12 weeks storage, whereas it did not show any spoilage in $SO_2$ 2 g/kg treated condition for whole storage period. The concentration of residual $SO_2$ in dried persimmons was detected within a safe range of 3.3~97.0 ppm. Therefore, the shelf-life of dried persimmons was lengthened in $SO_2$ generating pads (especially in $SO_2$ 2 g/kg) for inhibiting of browning and decaying.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.273-279
• /
• 2015

Recently, medical devices for a smart health development and dissemination are becoming increasingly frequent use of devices and their's thermal stability, durability, the external splendors are required. Industrial demand for smart health medical devices uses high-functioning electrodeposition technology that expressed pearl-like feeling is rapidly increasing. Generally, pearl powder is added to electrodeposition pigment in order to form a coating which shows pearl-like feeling. On the other hand, the electrodeposition technology for the smart health medical devices uses a new method that can express pearl-like feeling without using pearl powder. In this study, we was tried to find out the most appropriate texture formation, the right dilution recipe. We've tried various ptoportions of pigments (ED-600, ED-600S, ED-MX, ED-M). As a result, we found out that ED-600 and ED-MX (15% solid) in appropriate concentration showed the best adherence rate. By several samples tests and experiments which include washing the fixed pigment in various temperature levels ($20{\sim}40^{\circ}C$) and drying, we were able to get the best results in drying condition of $180{\pm}10^{\circ}C$ and $30{\pm}5min$. The research showed that it is mush more competitive and cost effective to use the new method that produces natural pearl-like feeling on the surface than to add pearl powder to high-functioning electrodeposition pigment, which is a method that has been used for the smart health medical devices so far.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.233-233
• /
• 2017

Algal communities are important to maintain the aquatic ecosystems function. Algae have short life cycles, they respond quickly to environmental change and their diversity and density can indicate and the quality of their habitat. The bloom forms before the rice seedings have emerged, it may present a physical barrier that prevents the seedlings from penetrating the floodwater. Wind may also move the algal bloom, pushing the young plants beneath the surface. Another harmful action develops when the water dries up and the algae form a layer at the bottom of the field. The layer envelops the seedlings, which are not yet deeply rooted, and drag them to the surface when the water is let in again. Soil utilization pattern can be the mail facter affecting soil physico-chemical properties, especially in soil phosphorus (P). Solid content of the algae culture solution increased with the increase in the nitrogen rather the phosphors concentration. Phosphoric acid was treated with conventional treatments (100-0%, before transplanting time-tillering stage), 50-50%, 0-100%, and un-treated. The herbicide was treated on the 7 DAT (day after transplanting). Green algae samples were collected 20 DAT. Total phosphoric acid was the highest at 0.06 in 50-50% treatment in 20 DAT. The amount of green algae was about twice (9.8 mg/20ml) that of un-treated. Total number of green algae was 54 species(Green algae 35 species, Euglena 9 species, Stone wheel 10 species). Among the phosphoric acid treatment methods, the number of occurrences of green algae were the highest with 39 species in 0-100%, followed by 50-50%, 28 species, conventional treatments, 22 species, non-treatment, 18 species, respectively. Rice Yield was not significantly different by phosphoric treatment time, but slightly higher than un-treated. The maximal algal biomass was observed about 2weeks or 1 month after transplanting; the subsequent decrease of the biomass was related to the consumption by grazers and to a deficient light under the rice canopy. Maximal algal growth was observed just before tillering. To estimate the suitable method of phosphorus application in puddled-soil drill seeding of rice, available phosphorus appearance of algal water bloom, and rice yield were investigated in paddy soil of rice-barley double cropping system.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.668-673
• /
• 2008

The objective of this study is to optimize the leaching conditions of sequential leaching and extracting processes for selective Ni recovery from spent Ni-Mo-based catalyst. The selective Ni recovery process consists of two processes of leaching and extracting process. In this 2-step process, Ni component is dissolved from solid spent Ni-Mo-based catalyst into leaching agent in leaching process and sequentially extracted to Ni complex with an extracting agent in the extracting process. The solutions of nitric acid ($HNO_3$), ammonium carbonate ($(NH_4)_2CO_3$) and sodium carbonate ($Na_2CO_3$) were used as a leaching agent in leaching process and oxalic acid was used as an extracting agent in extracting process. $HNO_3$ solution is the most efficient leaching agent among the various leaching agent. Also, the optimized leaching conditions for the efficient and selective Ni recovery were the leaching temperature of $90^{\circ}C,\;HNO_3$ concentration of 6.25 vol% and elapsed time of 3 h. As a result, Nickel oxalate having the highest yield of 88.7% and purity of 100% was obtained after sequentially leaching and extracting processes under the optimized leaching conditions.

• Ecology and Resilient Infrastructure
• /
• v.4 no.4
• /
• pp.226-236
• /
• 2017

In this study, we aimed to analyze the characteristics of water quality variation at Kyeongan Stream for a decade and to investigate by the flow-loading equation. The correlation analysis of water quality parameters and the influence factors were examined by statistical analysis. The characteristics of water quality variation showed that the fluctuations in $BOD_5$, $COD_{Mn}$ and TOC were repeated from year to year. TN and TP were decreased by year. By the flow-loading equation, the concentrations of $BOD_5$, $COD_{Mn}$, TOC and TN were decreased when the flow rate was on the rise. However, the flow did not affect the concentration of TP. According to correlation analysis, $BOD_5$ was highly correlated with $COD_{Mn}$ and TOC with the correlation coefficients of 0.890 (p<0.01) and 0.721 (p<0.01). The result of factor analysis, we identified that the water quality in Kyeongan Stream has been highly influenced by the organic matter index, followed by nitrogenous substance depending on the seasonal variations and the influx of suspended solid in accordance with the increase of flow.

• 한국해양학회지
• /
• v.28 no.3
• /
• pp.229-240
• /
• 1993

This study investigated the behaviour of sulfur species after the early diegenetic reduction of sulfate from pore solution in an anoxic intertidal flat deposit in the Banweol area of Kyeong-gi Bay, west coast of Korea. A total of seven sediment cores were collected during 1990∼1992 and were analyzed for their solid-phase sulfur species (acid-volatile sulfur, element sulfur, pyrite sulfur) as well as for chemical components in the pore solution, such as sulfate, ammonium, hydrogen sulfide, phosphate and Fe ion. The pore water sulfate oncentration was found to decrease rapidly downward from the sediment surface, while that of hydrogen sulfide, ammonium and phosphate showed and increase. The dissolved iron concentration in pore water, on the other hand, was found high in the surface layer of sediment, but fell sharply below this layer. these characteristic profiles of pore water sulfide and iron concentrations suggest that some reaction occurs between dissolved iron and sulfide ions, leading to the formation of various sulfide minerals in the sedimentary phase. The amount of inorganic sulfur species in the sediment increased downward, and showed a maximum of up to 7.9 mg/g. among the three species analyzed, acid-volatile sulfur (AVS) was dominant comprising more than 50% of the total. The amount of pyrite sulfur was greater than that of element sulfur. This implies that the formation of pyrite was restricted in this environment. the limited amount of element sulfur in this deposit may have discouraged the active formation of pyrite.