• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.8
• /
• pp.659-663
• /
• 2011

[ $Y_{1-x}BO_3:Tb_x^{3+}$ ]ceramic phosphors were synthesized with changing the concentration of $Tb^{3+}$ at a sintering temperature of $1,100^{\circ}C$ and a reduction temperature of $950^{\circ}C$ by using a solid-state reaction method. The crystal structure, surface morphology, and photoluminescence properties of the phosphors were investigated as a function of $Tb^{3+}$ ion concentration by using XRD (x-ray diffractometer), scanning electron microscopy, and photoluminescence spectrophotometry, respectively. The XRD results showed that the main peak of the phosphor powders occurs at (101) plane. As for the photoluminescence properties, the excitation spectra showed the broad band centered at 306 nm and the emission intensity of the spectra peaked at 543 nm indicated a significant decrease as the concentration of $Tb^{3+}$ ion is increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.3
• /
• pp.234-238
• /
• 1990

The effects of salt concentration immersion time in a salt solution prior to air dehydration and heating of air temperature during dehydration upon the browning reaction and pyruvic acid content of air dried garlics to a 6.5% moisture content(wet basis) were analyzed by a response surface methodology(RSM), Those values were also predicted by using a second degree polynomial regression model. Heating of air temperature was the most significant factor affecting the both browning reaction and pyruvic acid content. Salt concentration had more influence to browning reaction than immersion time whereas immersion time was more impor-tant factor than salt concentration on a retention of pyruvic acid sugested different processing conditions. While the processing conditions to minimize the browning reaction(O.D=0.009) were 0.3% of salt solution 9 min of immersion time and 5$0^{\circ}C$ of air temperature compared to control(O.D=0.022) of air dehydration at 5$0^{\circ}C$ Pyruvic acid contents were maximized(174 $\mu$mole/g garlic solid) at the 0.1% of salt solution 3 min of immersion time and 5$0^{\circ}C$ of air temperature compared to control(147 $\mu$mole/g garlic solid) of air dehydration at 5$0^{\circ}C$

• Elastomers and Composites
• /
• v.22 no.2
• /
• pp.109-120
• /
• 1987

In this study, as one of the developing ways of the functional elastomer, improvement of the functionality of CB-BR was attemped through stabilization. At first the stabilization effect of CB-BR and the concentration dependancy in CB-BR were determined. Then, triazine thiol derivative(BPTT) was synthesized by reacting p-aminodiphenylamine with cyanuric chloride. Further the functional mechanism and the effects of the antioxidants were investigated using BPTT together with other various antioxidants in liquid and solid states. The results obtained are as follows: 1) The aging of CB-BR depended on the concentration and temperature. Thus, at a low temperature of $50^{\circ}C$, the aging proceeded with gel formation; at high temperature above $100^{\circ}C$ and in above 4wt% concentration, the aging occured by the formation of gel. And in concentrations below that, the aging proceeds with a decomposition caused by oxygen attacked to elastomer molecules. 2) The effect of antioxidation of CB-BR in the liquid state was at it's best when the MBIZ and BPTT were used at $110^{\circ}C$, 4hrs after the oxidation. 3) The effect of antioxidation of CB-BR in the solid state was the best choice the simultaneous use of NDBC and BPTT at $50^{\circ}C$, 30days after the oxidation.

• Environmental Engineering Research
• /
• v.19 no.1
• /
• pp.83-89
• /
• 2014

The effects of initial solid concentration and microwave irradiation (MWI) time on the hydrolysis of waste activated sludge (WAS) were investigated. MWI time strongly influenced WAS hydrolysis for all initial solid concentrations of 8.20, 31.51, and 52.88 g VSS/L. For all WAS, the volatile suspended solids (VSS) solubilization degree ranged from 35.6% to 38.4% during a total MWI time of 10 min. Soluble chemical oxygen demand (SCOD) concentration increased at a rate proportional to the decrease of VSS during the MWI. However, the clearly different VSS solubilization patterns that were observed during the MWI were explained by the 2-step hydrolysis of WAS, consisting of the initial disintegration of the easily degradable part of the sludge, followed by the subsequent disintegration of the hardly degradable part of the sludge. WAS hydrolysis rates for 3 to 6 min of MWI were significantly lower than those for less than 3 min, or more than 6 min. From these results, 3 min MWI time and WAS of 31.51 g VSS/L (centrifugal thickener WAS) showed the most efficient hydrolysis of WAS at 36.0%. The profiles of total nitrogen (T-N) concentrations corresponded well to the SCOD increases in terms of the empirical formula of bacterial cell mass ($C_5H_7O_2N$). The negligible T-N increase and pH decrease during WAS hydrolysis by MWI will allow the application of this process to subsequent biological processes, such as anaerobic digestion.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.2
• /
• pp.105-118
• /
• 2015

This study was conducted to obtain proper amount of solid swine manure and poultry manure in the beginning phase of Cornus kousa growth by investigating the initial germination, seedling growth increment, dry weight, chlorophyll content change, body nutrient uptake and chemical changes of soil according to the concentration of solid swine manure and poultry manure fertilization. When treated with solid swine manure and poultry manure, seed germination rate was the highest in the control. However germination rate showed a tendency to decrease when treated with high concentration of swine manure and poultry manure. The survey results of the growth increment were all higher than that of the control. At the 1.0% treatment of both swine and poultry manure, the seedling height growth was highest. Poultry manure treatment made higher result than swine manure treatment at each treatment. Dry weight was the highest at the 1.0% treatment by both swine and poultry manure. Dry amount declined sharply at the 2.0% treatment. Poultry manure was higher in weight than swine manure at every treatment. Chlorophyll content was the highest at the 1.0% treatment by both swine and poultry manure, but declined sharply at the 2.0% treatment. The survey content was higer than that of the control. The amount of nutrients absorbed in the seedling body was generally high at the 1.0% treatment of swine manure and poultry manure. For the planting soil of Cornus kousa the higher concentration of swine manure and poultry manure was, the lower pH became. However, nitrogen, got higher. available phosphoric acid, exchangeable K, Na, and Mg got higher.

• Korean Journal of Food Science and Technology
• /
• v.16 no.4
• /
• pp.423-428
• /
• 1984

Changes in viscosity of soymilk were evaluated as affected by solid concentration, temperature, pH and sugar addition. Soybeans were soaked, ground with boiling water, and filtered followed by boiling for 30 min for soymilk preparation. It was found that viscosity increased exponentially as solid concentration increased while the raise of temperature caused exponential decrease in it. A minimum viscosity was ovserved at pH 6.5 in the range of pH 5.0-8.0. The effects of solid concentration and pH on viscosity were reduced as the measuring temperature increased. Addition of sucrose up to 9% showed little effect on viscosity with showing a tendency of increase.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.456-462
• /
• 2015

The objective of this study was to develop an advanced pump technology using tornado and axial pumping principles without priming water. The developed rotor type slurry pump consisted of an electric motor, driving shaft and coupling, a rotor, an impeller, suction and discharge pipes. For the clean water test, the experimental results are presented for the discharge flowrate, electric power input and vacuum pressure with the rotor design parameters as a function of the motor rpm. The slurry discharge characteristics with the solid concentration of the cement slurry was performed. As the rotor diameter and height increase, the discharge flowrate and electric power input increase while the vacuum pressure in the suction pipe decreases. The rotor thickness had no significant effect on the discharge flowrate and electric power input. Slurries with more than 18 % solid concentration, which is the development factor, can be pumped.

• Resources Recycling
• /
• v.10 no.4
• /
• pp.48-57
• /
• 2001

The main consistent materials and main elements of the bottom ash in municipal solid waste incineration ash according to particle size were investigated and the environmental hazards were considered by investigating the content of dioxin and heavy metals in bottom ash and the concentration of heavy metals in its leachate. The main materials of bottom ash are glasses, ceramics, scraps of iron. As the particle size increases, their percentage weight also increases and their percentage weight was over 70% in 4 mesh~25 mm particle size fraction. The main elements of bottom ash are CaO, $SiO_2$, $Fe_2$$O_3$,$ A1_2$$O_3$and the content of CaO decreases and the content of $SiO_2$increases as particle size increases. The heavy metals accumulate in small particle size fraction. The concentration of heavy metals in each leachate by domestic leaching test is almost similar. As the aging period is prolonged, pH of bottom ash lowers gradually and the leached concentration of Cu and Pb diminishes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.73-83
• /
• 2014

CFD(computational fluid dynamics) model is developed to simulate direct injection of ammonia gas phase from ammonia transporting materials into the SCR catalyst in the exhaust pipe of the engine with solid SCR. Configurations of one-hole and four-hole nozzle, circumferential type, porous tube type, and the effect of mixer configurations which commonly used in liquid injection of AdBlue are considered for complex geometries. Mal-distribution index related to concentration of ammonia gas, flow uniformity index related to velocity distribution, and pressure drop related to flow resistance are compared for different configurations of complex geometries at the front section of SCR catalyst. These results are used to design the injection system of ammonia gas phase for solid SCR of target vehicle.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.65-69
• /
• 2003

The effects of microstructural features on the fracture behaviors, including impact, high-cycle fatigue, fatigue and crack propagation, of thixoformed 357-T5 (Al-7%Si-0.6%Mg) alloy were examined. The resistance to impact and high-cycle fatigueof thixoformed 357-T5 tended to improve greatly with increasing solid volume fraction. An almost three-fold increase in impact energy value was, for example, observed with increasing solid volume fraction from 59 to 70%. The improvement in both impact and fatigue properties of thixoformed 357-75 with increasing solid volume fraction in the present study appeared to be related to the magnitude of stress concentration at the interface between primary and eutectic phase, by which the fracture process was largely influenced. Based on the fractographic and micrographic observations, the mechanism associated with the beneficial effect of high solid volume fraction in thixoformed 357-T5 alloy was discussed.