• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.239-242
• /
• 2009

Power Control and Distribution Unit (PCDU) plays roles of power generation control for solar array panel, power storage control for battery system, power conversion for unregulated and regulated primary bus and power distribution to bus and payload system. The selection and design of the proper auxiliary power interface for PCDU depending on various mission is one of the most important step for electrical power subsystem design. In this paper, the general design approach of auxiliary power interface for PCDU which can be used for small-sized LEO satellites application is given. And, the auxiliary power design concept for always alived modules such as solar array regulator and house keeping module is also suggested.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.681-684
• /
• 2002

In this paper, electrical power subsystem(EPS) simulator for KOMPSAT 2 has been analyzed designed and simulated by object oriented design(OOP) method. To design EPS simulator, the EPS modules, which modeled solar array, solar array regulator, deployment device controller, battery, power control unit, and EPS control unit, are modeled. To verify the EPS simulator, the modules has been simulated. By OOP designs, the EPS simulator is very powerful because this method is applicable to design other EPS simulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.310-312
• /
• 1994

A partial shunt regulator (PSR) which is the power regulator of KOREASAT is modeled. The modeling of the PSR consist of solar array, power circuit, controller. and load models. To realize simple structure. a voltage source of the PSR controller is used the output voltage of the PSR. The model of the PSR has very complex structure with two additional coupled feedback loops. The complex model is simplified to a simple meaningful model with only main feedback control loop. The proposed model is compared to a PSR model with DC voltage source at the PSR controller. The proposed PSR model is verified by comparing the model with SPICE simulation for small signal analysis.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.193-201
• /
• 1996

The space power system for communication satellite which employs the direct energy transfer (DET) method consists of solar array, battry, shunt regulator, charger/discharger and power control unit (PCU). In this paper, the development of the DET power system charger/discharger unit and a microprocessor based PCU is developed for simplicity and flexiblity in the modificatin of control algorithm. A 28V bus voltage, 400W power rting power simulator is built and tested to verify the operation of the simulator at each mode and the stability of mode transition is analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1368-1370
• /
• 2005

Satellite is operated only with internal battery when separated from rocket. Internal battery is charged only from SAR(solar Array Regulator), solar cell. So battery will be exhausted and purpose of satellite will be failed if load module is out of order or short. This paper proposed real time current limiter which operated by telemetry of outer processor. This current limiter operates by control signal simultaneously cuts off over current by self over current sensing circuit. So it can reduce waste of battery energy and over load of outer processor.

• 항공우주기술
• /
• 제3권2호
• /
• pp.11-19
• /
• 2004

버스전압이 배터리 전압과 동일하며, 전력조절기(power regulator)의 스위칭 듀티 값(duty-ratio)이 위성탑재 소프트웨어에 의해서 제어되는 소프트웨어 제어방식의 비 조절형 버스 시스템(unregulated bus system)은 저궤도 위성에 흔히 사용된다. 본 논문에서는 이와 같은 소프트웨어 제어방식의 비 조절형 버스 시스템의 전력조절기 모듈화에 적용 가능한 새로운 전원단 회로를 제안하며, 제안된 전원단의 모드별 동작 특성을 해석한다. 다음으로 컨버터 병렬동작에서 발생할 수 있는 모듈간 전류 불균형(current unbalance)에 대한 제안된 전원단의 타당성을 검증하기 위해 제안된 전원단을 적용한 병렬모듈 컨버터의 prototype을 제작하여 모듈별 전류 분배(current sharing) 특성을 시뮬레이션 결과와 비교 검토한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.442-446
• /
• 2004

KOMPSAT series use software-controlled unregulated bus system in which the main bus is directly connected to a battery and the duty-ratio for PWM switch is controlled by the on-board satellite software. This paper proposes a new power-stage circuit that can be available for modularization of the power regulator which is used at the software-controlled unregulated bus system satellite. And we analyze the proposed power-stage operation according to its operating modes and verify it by performing software simulation and hardware experiment using prototype. We constructs a parallel-module converter which is composed of proposed power-stages and perform experiment to verify modular characteristics of the proposed power-stage. Finally, we verify the usefulness of the proposed power-stage by comparing above results with those of a parallel-module converter made of conventional power-stages.

• 한국항공우주학회지
• /
• 제34권4호
• /
• pp.89-101
• /
• 2006

본 논문에서는 HAUSAT-2 전력계의 설계와 각 모드별로 에너지 평형 해석을 통한 전력계 설계의 타당성을 검증하였다. 태양전지판은 GaAs 셀을 사용하였고 디지털 방식의 최대 전력 추적기를 채택하였다. 배터리 팩은 4개의 Li-Ion 셀로 구성하였고 최대 전력 추적기와 배터리 충전 조절기로 배터리 충전 기능을 구현하였다. 전력 제어기는 DC-DC 변환기로 요구되는 전압을 출력하고 상용 IC 및 MOSFET으로 이루어진 전력 분배기가 서브시스템 및 탑재체에 전력을 분배시킨다. 전력생성 분석은 다양한 승교점 지방시(LTAN)를 가지는 궤도를 고려하여 수행하였으며, 이 중 HAUSAT-2의 임무 수행에 적합한 궤도를 선정하여 모드별 전력 사항을 반영하여 에너지 평형 해석(EBA)을 진행하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.93-96
• /
• 2003

Korea Multi-Purpose SATellite (KOMPSAT) uses software-controlled unregulated bus system In which the main bus is directly connected to a battery and the duty-ratio for PWM switch is generated by the on-board satellite software algorithm. In this paper, we propose a new power-stage circuit that can be available for modularization of a solar array regulator(SAR) which is used in the KOMPSAT. The operations at each mode and current sharing characteristics of the power-stage are analyzed and verified by simulation and experiments on a prototype converter.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1246-1251
• /
• 2000

High level random vibration environments induced while launching of spacecraft can damage sensitive electronic equipment very rapidly, unless the equipment is properly packaged. Thus very careful consideration on the launch environment, especially for high level random vibration, is required in the design stage of electronic equipment of spacecraft. This paper describes the development process of Solar Array Regulator for KOMPAT-2, which is designed and tested by Korean engineers. Both analytical and experimental techniques are introduced in this paper.