• 대한화학회지
• /
• 제41권3호
• /
• pp.130-137
• /
• 1997

육방형 이황화 티탄늄의 분말과 박막을 졸-겔법을 변형시켜 제조하였다. 여러 가지 용매하에서 이소프로폭시화 티탄늄과 황하 수소와의 반응에 의해 전구체의 침전을 유도한 후 이것을 황화 수소 분위기에서 열처리를 하면 분말이 얻어지는 반면 2-메톡시에톡시화 티탄늄과의 반응은 안정한 전구체 용액을 주므로 이것을 스핀 코팅하여 열처리하면 박막을 얻을 수 있다. 이러한 분말과 박막의 형태 변화를 열처리를 하면서 전자 현미경과 분말 X-선 회절기를 통해 살펴보았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.220-223
• /
• 2005

We studied the effect of composition, processing, and sintering temperature on the microwave properties of $Mg_{3-x}Co_x(VO_4)_2$ system which is applicable to LTCC. When $Mg_{3-x}Co_x(VO_4)_2$ was fabricated by solid-state reaction process and sintered at the temperature range of $800\sim910^{\circ}C$, it was found that the optimum composition of x was 2 at which microwave properties of 910$^{\circ}C$-sintered one were as follows: $Q\times f_0\sim55,200GHz$ and $\varepsilon_r\sim10$. When $(MgCo_2)(VO_4)_2$ was fabricated by sol-gel process and sintered at 800$^{\circ}C$, $Q\timesf_0$was 34,400GHz which is much high compared to those fabricated by solid-state reaction process at the same sintering temperature.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.884-890
• /
• 2002

An inorganic-organic hybrid system, silica-poly(ethylene glycol) songel is reported. This system was prepared via sol-gel method by varying varous processing variables. e.g. ultrasonic radiation time, gelling temperanture, PEG content and its molecular weight. Various experimental techniques wee employed to analyze the morphological, mechanical and optical properties of the system. The results were discussed in the light of existing theories. The sonogel system exhibited the common features of inorganic-organic hybrids. $SiO_2-10$ wt% PEG sonogel exhibited the morphological and optical properties superior to those reported earlier for the classic gels and found suitable for device applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.365-366
• /
• 2005

PZT films are the most intensively investigated because PZT has advantages such as low processing temperature and large remnant values. In this paper, the microstructure and electric properties of $Pb(Zr_x,Ti_{(1-x)})O_3/BaTiO_3$ heterolayered thick films with Zr mole ranging from 30 to 70 % screen printed onto a alumina substrate were studied. $Pb(Zr_x,Ti_{(1-x)})O_3$ and $BaTiO_3$ powders were prepared by the sol-gel method. The $BaTiO_3$ powders were calcined at $700^{\circ}C$ for 2 hours. Structural properties of $Pb(Zr_x,Ti_{(1-x)})O_3/BaTiO_3$ multilayered thick films were investigated. As a result of the X-ray diffraction (XRD) analysis, $Pb(Zr_x,Ti_{(1-x)})O_3/BaTiO_3$ exhibited a perovskite polycrystalline phase without pyrochlore phase or any preferred orientation.

• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.70-74
• /
• 2009

Sol-gel 법으로 제조한 $Pb(Sc_{1/2}Nb_{1/2})O_3$(이하 PSN) sol을 이용하여 스핀 코팅법으로 Pt(111)/Ti/$SiO_2$/Si 기판위에 제조한 박막의 제조 공정에 따른 영향을 연구하였다. Pt 기판위에 PSN sol을 증착, 건조한 후에 $370^{\circ}C$에서 5분간 열처리를 행한 후 $10^{\circ}C/sec$의 급속 가열로 $600{\sim}700^{\circ}C$에서 최종 열처리한 경우에 박막은 (111)면으로 우선 배향하는 것으로 나타났다. 그러나 중간 열처리를 거치지 않고, 급속가열에 의한 최종 열처리만을 행한 경우에는 (100)면으로 우선 배향하는 것으로 나타났다. 한편, 중간 열처리 후 $4^{\circ}C/min$의 승온속도로 관상로에서 최종 열처리를 행한 경우에는 (111)면과 (100)면이 동시에 나타나는 것으로 나타났다. 동일한 조건하에서 박막의 두께는 모두 300로 중간 열처리 공정이 어떠한 영향도 미치지 않는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제29권8호
• /
• pp.593-600
• /
• 1992

Through sol-gel processing, Inorganic-organic composite was obtained. The influence of water content used in hydrolysis on the bonding state, microstructure, strength, and elongation into IR, NMR, Tg, etc. As the water content was increased, the bonds between inorganic Si-(OH) and organic Si-(OH) increased, and relatively denser microstructure was formed. Tensile strength and elongation decreased with amount of water content.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.259-264
• /
• 2000

Systematic research of metal alkoxide electrophoretic deposition has been developed. The formation mechanism of electrophoretic deposits has been offered. The structure study of dry and heat-treated electrophoretic deposits has been established. The concrete examples of one and bi-component oxide thin film formation were considered. The new approaches for thin film technology have developed on various substrates of different shapes and sizes. The correlation between thin film structure, mechanism of their formation, and physico-chemical properties has been determined.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1414-1416
• /
• 2001

Crack-free and homogeneous compact and epitaxial lead zirconate titanate(PZT) ferroelectric thin films with perovsikte structure have been prepared by sol-eel method. Tetrabutyl titanate, lead acetate and zirconium nitrate are used as raw materials. Glacial acetic acid is used as a catalyst. Ethylene glycol monoethyl ether is used as a solvent. The annealing temperatures of th thin films are 600~900$^{\circ}C$. The values of the remanent polarization Pr, and the coercive field $E_c$, of the PZT ceramic thin films are 46, 35 ${\mu}C/cm^2$ respectively.

• Macromolecular Research
• /
• 제17권9호
• /
• pp.697-702
• /
• 2009

Mesoporous ethanesilica thin film was prepared using PEO-PLGA-PEO triblock copolymers as structure-directing agents and (1,2-bis(triethoxysilyl) ethane BTESE; bridged organosilicates) as inorganic precursors via one-step sol-gel condensation of ethanesilica precursors. The mesostructure of ethanesilica films is critically dependent on the processing experimental parameters after the hydrolyzed silica sol mixture was spin-cast. This study examined the effects of the block copolymer template/organosilica precursor ratio in the casting solution and aging period before calcination of the mesostructure. It was further demonstrated that mesoscopic ordering of organosilicate thin films is induced by the rearrangement of block copolymer template/organosilica hybrid during thermal decomposition of the PEO-PLGA-PEO triblock copolymer. The mesoporous structure and morphology were characterized by SAXS, TEM and solid-state NMR measurement.

• 한국재료학회지
• /
• 제11권2호
• /
• pp.94-103
• /
• 2001

졸-겔공정을 이용하여 SiO$_2$ 및 TEOS에 유기 고분자로서 PDMS가 도입된 PDMS/SiO$_2$ xerogel을 제조하고 촉매로서 HCI과 NH$_4$OH를 이용한 2 step acid/base catalyzed공정에 의해 SiO$_2$ 및 PDMS/SiO$_2$ xerogel의 기공 크기 및 분포를 제어하였다. 촉매로서 HCl이 첨가된 SiO$_2$ 및 PDMS/SiO$_2$ xerogel에서 PH는 2.3~2.5, gel화 시간 12~13일, xerogel의 모양은 Pellet형태를 나타내나 HCl/NH$_4$OH 몰비가 증가하면 pH 및 gel화 시간은 급격히 감소하고 xerogel의 모양도 pellet형과 column형으로 뚜렷하게 구분된다. 이는 반응의 최종용액이 산성이면 가수분해속도가 축합속도보다 빠르게 진행되어 9el화에 오랜 시간이 소요되어 pellet형의 Xerogel이 되나 약산성에서는 축합속도가 가수분해속도보다 빠르게 되어 gel화 시간은 빨라지고 column형의 xerogel이 되기 때문이다 SiO$_2$ 및 PDMS/SiO$_2$, xerogel의 표면적 및 평균기공크기는 HCl/NH$_4$OH 몰비가 증가함에 따라 각각 400$\rightarrow$600($\m^2$/g)과 15$\rightarrow$28$\AA$ 으로 변화하고 단일 기공크기분포를 갖는다. 이는 초기에 HCl에 의해 가수분해된 종이 NH$_4$OH에 의해 축합속도가 촉진되어 silica의 골격구조가 낮은 온도에서 규칙적으로 형성되고 열처리에 의해 균일한 기공으로 되었기 때문이다.