• Magazine of the Korean Society of Agricultural Engineers
• /
• 제35권3호
• /
• pp.130-139
• /
• 1993

In order to evaluate the long-term permeability performace of the geotextiles, for five different combination of geotextiles and soils the long-term column test method The results obtained are as follows; 1.The gradient range of the initial stage of the long-term permeability curves varied with respect to the soil types, while that of the final stage varied according to the interaction of the soil/geotextile system. 2.The time required for a given soil/geotextile system to reach a interactive stable stage was measured ahout 100 hours for the standard sand and 150 to 600 hours for the silty content soils, respectively. 3.There were no differences between the plain woven geotextile and the non-geotextile in the long-term permeability performance. 4.As the silt content increased, the long-term performance of the geotextiles decreased, and the limiting silt content was about 15%. 5.The thickness and area density of the geotextiles did not influence on the variation of the seepage quantities. 6.The ayerage slope and the transition time of the long-time flow curve were calculated. 7.In order to evaluate the mechanism of soil/geotextile system more perfectly, the gradient ratio test or the hydraulic conductivity test is required.

• Structural Engineering and Mechanics
• /
• 제9권1호
• /
• pp.69-88
• /
• 2000

A relatively simple model of a buried structure response to a surface loading that can simulate a possible opening and closure of a gap between the soil and the structure is presented. Analysis of the response of small and medium scale buried roof slabs under surface impulsive loading shows that the model's predictions are in fairly good agreement with the experimental results. Application of the model to a study case shows the relative influence of system parameters such as, the depth of burial, the arching coefficient, and the roof thickness, on the interface pressure and on the roof displacement. This model demonstrates the effect of a gap between the structure and the soil. The relative importance of including a gap opening and closure in the analysis is examined by the application of the model to a study case. This study results show that the deeper the depth of burial, the longer the gap duration, and the shorter the duration of the initial interface impact, while the higher the soil's shear resistance, the higher the gap duration, and the shorter the initial interface impact duration.

• Journal of Soil and Groundwater Environment
• /
• 제15권6호
• /
• pp.53-63
• /
• 2010

Pneumatic fracturing is an emerging tool to enhance the remediation efficiency of contaminated unsaturated zones by injecting high pressure air and inducing artificial fracture networks. Pneumatic fracturing is reported to be well suited for the cases where the contaminated unsaturated zone thickness is less than 5 m as many contaminated domestic sites in Korea. Nevertheless, there have been almost no studies carried out on the site-specific efficiency and the optimized design of pneumatic fracturing considering the unsaturated zone characteristics of Korea. In this study, we employ numerical simulations to compare the efficiency of pneumatic fracturing on the aspect of the site remediation and the porosity improvement at several hypothetic unsaturated zones composed of four typical soil types. According to the simulation results, it is found that the zone with fine grains soil such as clay and silt shows better efficiency than the zone composed of coarse grains in terms of air flow and porosity enhancements. The results imply that pneumatic fracturing may improve the efficiency of site reclamation by jointly or independently applied to the many contaminated sites in Korea.

• Korean journal of food and cookery science
• /
• 제17권5호
• /
• pp.510-516
• /
• 2001

Hydroponic cultivation is a technology of raising crops without use of soil. Generally farmers use the method of DFT(deep flow technology)to grow leafy or fruity vegetables; however, systematic and scientific researches are insufficient on this matter. This study investigated the possibility of cultivating Chinese cabbage steadily year long by using the method of DFT. Chinese cabbage was cultivated hydroponically with and without Ge addition, used to prepare kimchi, and the chemical and microbiological characteristics of kimchi were compared. The basic hydroponic cultivation condition was as follows: 30 days after seeding, the raised seeds were moved to a hydroponic bed and given underground water for 3 days so the roots grow normally Standard nutrient solution was provided and the early electric conductivity concentration was maintained between 1.5∼2.5 thickness. The temperature of the solution was maintained between 10 ∼25$^{\circ}C$ to allow the growth of Chinese cabbage. When soil-cultivated, organically cultivated and hydroponically cultivated Chinese cabbages were compared, hydroponically cultivated cabbages were smaller in size and showed less ability to build up and fold leaves into a head, but showed better quality than organically cultivated cabbages. The contents of protein and fat showed no significant differences. The contents of water. Ca, P, Fe, Vitamin A and Niacin were higher in control and Ge-added cabbages compared with soil-grown cabbage. There was no difference between soil-cultivated Chinese cabbage kimchi and hydroponically cultivated Chinese cabbage kimchi.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제5권4호
• /
• pp.7-12
• /
• 2006

Galvanized steel pipe, copper pipe and stainless steel pipe, which is being used in waterworks piping materials. In case of galvanized steel pipe, the precipitation of a product is being generated due to the pollution of the tap water, a white water phenomenon, and various corrosion reaction because a zinc ion is melted by tap water. And in case of a cupper pipe, many problems which is harm in sanitation appeared because of a inflow of harmfulness substance by a frequent accident of a water leakage. So, to prevent these problems, it is substituted for stainless steel pipe. However, those problems is still occurring because of badness of welding, a problem of a water leakage in connection part, and a increment of construction expenses. Therefore, this research has examined the laying period according to each piping thickness and a corrosion shape according to each laying depth after laying in various soils(sandy loam, loamy, clay loam, clay) using galvanized steel pipe, copper pipe, and stainless steel pipe. That is, we has studied the data which is necessary for a rational method of preserving the quality of water by examining the corrosion properties of piping materials in the soil environment which waterworks piping materials is being used.

• Nuclear Engineering and Technology
• /
• 제56권10호
• /
• pp.4446-4454
• /
• 2024

This paper presents a seismic analysis method that can evaluate a very large number of cases for the free standing dry storage cask by proposing a methodology that has short analysis time as well as accuracy. This study also performed a seismic analysis of a dry storage facility with multiple casks to show a tip-over phenomenon from earthquake accident conditions. The earthquake accident condition is long-term event that occur during about 20 s long, and lots of seismic analysis cases should be performed to consider various real conditions because the free-standing spent-fuel dry storage cask has many nonlinear responses. The soil-concrete pad-cask interaction was considered in the seismic analysis and finite element model was made using concrete pad, soil and cask models. In the reinforced concrete pad, the rebar was excluded to reduce the analysis time, but the thickness was corrected to maintain the bending rigidity. Additionally, the analysis time reduced by modeling the cask as a rigid body rather than a flexible body. 35-cases of seismic analysis were performed to determine a tip-over phenomenon from each earthquake. The analysis revealed that no tip-over phenomenon of the cask was observed in all analyses from 0.2 g to 0.6 g, however the tip-over of the cask were observed from 0.8 g with friction coefficients of 0.8 and 1.0.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1132-1140
• /
• 2011

When the offshore wind power plant is planned to construct, it is important for the wind farm site to figure out the distribution of the weak soil layers that might cause subsidence by the impact of the external moment from the wind plant's load and an oscillating wind load. Coring test is the optimistic method to figure out weak soil layers, but this method have some problem such as condition of the in-situ or economical limitation. In order to make up for the weak points in coring test, the researches using the geostatistics methods is actually done. In this study, setting a fixed coastal area that offshore wind plants construct firstly and Estimation of distribution on the thickness of the weak soil layer through the geostatistic method is conducted. The weak soil layer is sorted by result of the Standard penetration test, geostatistic method is used to ordinary kring and sequential gaussian simulation and compared to both method's result. As a results of study, we found that both methods show similar estimations of deep weak soil layer and we could evaluate quantitatively the uncertainty of the result.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• 제9권6호
• /
• pp.143-151
• /
• 2006

Currently, there are researches about environment-friendly road construction plans led by the Ministry of Construction and Transportation in progress. Therefore, in order to create the revegetation techniques of thin layer-soil combination media hydroseeding measures by actively using native herbs and native woody plants instead of using imported foreign grasses as a concept of sustainable environment-friendly land development, this thesis is going to identify problems that can appear when applying the thin- layer-soil-media hydroseeding measures by the suggested in the "Slope revegetation design and guidelines" proposed by the Ministry of Construction and Transportation, and to propose improvement plans for the problems.To this aim, a seeding mixture selection test was conducted by the goal of slope restoration, and a test group for artificial slope was created. As for a test for June sowing, it was intended to identify appropriate combination quantity by conducting a test that differentiates the combination quantity, and as for a test for September sowing, an artificial slope test was conducted by creating an artificial bank for earth and soil and applying 1~2cm and 3~4cm thickness after differentiating the seed combination volume and slope aspects.

• Korean Journal of Construction Engineering and Management
• /
• 제10권6호
• /
• pp.40-47
• /
• 2009

The lightweight bubble mixture soil is used for soft ground rear-filling material by applying reduced weight on structure. However, comparing with the general soil, it is not applied in domestic because of initial phase cost of construction. General soil, which has lower initial phase cost is usually used for rear-filling, but the use of overlay method of general soil is reduced as the number of layers increases. Especially box structure placed in soft ground or the overlay method when gap near pier rear-filling can be replaced with temporary alternative method, however, it can't be a solution to gap by generation of extra weight of thickness of overlaying. Therefore, execute LCC analysis of two alternative-the general and the lightweight bubble mixture soils, which are rear-filling material of box structure- and present economical analysis in order to make resonable decision from the economics. As a result, although the lightweight bubble mixture soil takes higher initial phase cost than the general soil, it has been analyzed to procure economical efficiency by having less cost of maintenance.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제2권1호
• /
• pp.1-10
• /
• 1998

In the dynamic soil-structure interaction(SSI) analysis, numerous uncertain parameters are involved. They include the uncertainties in the definition of input motions, modeling of soil-structure interaction systems. analysis techniques, etc. This paper presents the results of parametric studies of the seismic responses of a reactor containment structure built on the viscoelastic layered soil. Among the numerous parameter, this study concentrates on the effects of definition point of the input motion, embedment of structure to the base soil, thickness of the top soil layer, and rigidity of the base soil. The substructure method using frequency independent impedances is adopted. The method is based on the mode superposition method in time domain using the composite modal damping values of th SSI system computed from the ratio of dissipated energy to the strain energy for each model. From the study results, the sensitivity of each parameter on the earthquake responses has been suggested for the practical application of the substructure method of SSI analysis.