• KIEAE Journal
• /
• 제14권4호
• /
• pp.119-125
• /
• 2014

This study investigated the effects of pipe network materials and distance on system performance utilizing unused energy sources in large-scale horticulture facility. For this, the modeling was performed with a 100 m long and 100 m wide rectangular shaped glass house having an area of 1ha ($10,000m^2$) using EnergyPlus software. The heat sources considered were air source, geothermal heat, power plant waste heat, sea water heat, and river water. The temperature variation of the fluid with regard to pipe material and distance from the heat source and the resultant heat pump electricity consumptions were calculated. It turned out that the fluid temperature reaching the heat pump increased as the distance from the heat source increased in case of sea water and river water, which have higher temperatures than the surrounding soil, improving the heat pump efficiency. It was vice versa in case of the power plant waste heat. In addition, pipe material of PVC showed the smallest effect on the system performance variation due to the lowest thermal conductivity, compared to PB and HDPE.

• 한국조경학회지
• /
• 제28권5호
• /
• pp.48-57
• /
• 2000

This paper is dealing with the fundamental properties of planting concrete, replacing the existing cover concrete on the roof of a building. This study is to find out the physical characteristics of the planting concrete and rearing characteristics of the grass throughout the modeling experimental materials. As the results of the experiment, the physical properties of planting concrete show the following results; when the paste to aggregate ratio is 0.2~ 0.4, voids volume : 30~17%, unit weight: 1,710~2,010kg/m3, compressive strength : 45~145kgf/$\textrm{cm}^2$, its pH is more than 11, but is reduced to the proper degree for planting after being neutralized. Kentucky bluegrass covered with planting concrete is grown well. The planting concrete used with blast furnace slag cement shows a better properties at the height, the width and the covering rate by 1.1cm, 0.5mm and 7%, respectively, than those used with ordinary portland cement. Also, the less the paste to aggregate ratio is, the better the plant grows. The orders of the effects of temperature control are as follows; the system of planting concrete with grass>the system of planting concrete without grass>the system of mixed soil>the existed roof system. In case, the planting concrete is placed to the roofs of buildings instead of normal concrete slab, and a number of favorable effect can be expected such as the improvement os environmental factors, the reduction of construction cost, the saving of energy and the reduction of environment load. The future research on the change of a variety of the aggregate conditions and the application of the practical structures should be made, and also the research of the endurance also be performed.

• 한국전산구조공학회논문집
• /
• 제33권1호
• /
• pp.17-23
• /
• 2020

본 논문에서는 인공섬 형식의 방호공을 구성하는 수중사면에 선박이 충돌하는 경우 발생하는 선박과 지반의 거동을 해석하기 위한 모델을 Coupled Eulerian-Lagrangian(CEL) 기법을 이용하여 구성하였다. 충돌에서 발생하는 지반의 전단파괴를 포함하는 대변형을 고려하기 위하여 지반과 해수는 Eulerian 영역으로 구성하고 충돌체를 Lagrangian 영역으로 구성되었다. 해석의 효율성을 향상시키기 위해서 mass scali기법을 충돌체의 모델링에 도입하였으며, 지반은 Eulerian영역에서 Eulerian Volume Fraction(EVF)값을 설정하여 구성하였다. 작성된 모델의 적용성을 검증하기 위하여 동적관입앵커에 대한 해석을 수행하였다. 또한 컨테이너선의 외부형상에 따라 고체요소로 모델링된 선수가 수중사면에 충돌하는 경우의 해석을 수행하고, 그 때 발생하는 변위, 속도, 소산에너지 등의 거동을 평가하였다. 그 결과로 매개변수해석에 대한 추가적인 연구 필요성이 도출되었다.

• 한국환경농학회지
• /
• 제28권1호
• /
• pp.38-46
• /
• 2009

Livestock manure is an important source of nutrients for crop production. However, farmers typically do not know the exact nutrient values for livestock manure. In many instances, manure has been viewed as a waste, and as a result it is applied close to the source resulting in over application of nutrients. Thus, the goal of nutrient application has often been applied to reduce the application expense rather than to maximize crop income. This results in wasted money and potentially negative impacts on water quality. Several livestock manure management scenarios were created based on agronomic nutrient requirements using the Utilization of Animal Manure as a Plant Nutrient (AMANURE) software to investigate water quality impacts with the National Agricultural Pesticide Risk Analysis (NAPRA) WWW modeling system. Application of manure at agronomic rates can result in high nitrate-nitrogen losses for some soil types, especially when applied in late fall. The application of manure at an agronomic rate does not necessarily equate to adequate water quality protection, and farmers must take care applying manure at agronomic rates, because nitrate-nitrogen loss potential varies spatially and temporarily. Nutrient loss probability maps for Indiana at 5%, 10%, 25%, and 50% values were created to demonstrate potential water quality impacts when livestock manure is applied to cropland at agronomic rates. The NAPRA WWW system coupled with AMANURE can be used to identify site-specific livestock manure management plans that are environmentally sound and agronomically appropriate.

• 대한교통학회지
• /
• 제29권2호
• /
• pp.123-131
• /
• 2011

본 연구에서는 지표면과 대기사이의 열-에너지 균형원리를 이용한 노면온도예측모형을 개발하였다. 본 연구에서 개발된 노면온도예측모형은 두 가지 모듈로 구성되는데 Canopy 1은 지표면과 대기 간의 열 교환을 묘사하기 위한 것이고, Canopy 2는 열에너지 교환 과정에서 포장체 특성을 반영하기 위한 것이다. 모형 수행에 필요한 다양한 입력변수는 기상청으로부터 수집하였다. 개발된 모형의 성능을 평가하기 위해 청원-상주 간 고속도로 상 문의교 지점에 설치된 접촉식 노면온도측정센서로부터 수집한 노면온도자료와 모형 수행을 통해 나온 결과 값을 비교 하였다. 이러한 비교는 동절기(12월)와 동절기 외 기간(10월)에 걸쳐 수행되었다. 비교 결과, 두 온도의 평균오차 값이 ${\pm}2^{\circ}C$ 범위 내에 있어, 모형의 성능이 매우 우수한 것으로 판단된다. 이러한 연구는 동절기 도로관리에 다양하게 사용될 것으로 사료되고, 특히 도로 기상정보체계 운영에 핵심이 되는 노면온도 예측 알고리즘으로 사용될 수 있는 기초 연구가 될 것이다.

• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.295-308
• /
• 2018

The excavation of twin tunnels is a process that destabilizes the ground. The stability of the tunnel lining, the control of ground displacements around the tunnel resulting from each excavation and the interaction between them must be controlled. This paper provides a new approach for replacing the costly 3D analyses with the equivalent 2D analyses that closely reflects the in-situ measurements when excavating twin tunnels. The modeling was performed in two dimensions using the FLAC2D finite difference code. The three-dimensional effect of excavation is taken into account through the deconfinement rate ${\lambda}$ of the soil surrounding the excavation by applying the convergence-confinement method. A comparison between settlements derived by the proposed 2D analysis and the settlements measured in a real project in Algeria shows an acceptable agreement. Also, this paper reports the investigation into the changes in deformations on tunnel linings and surface settlements which may be expected if the twin tunnels of T4 El-Harouche Skikda were constructed with a tunneling machine. Special attention was paid to the influence of the excavation phase shift distance between the two mechanized tunnel faces. It is revealed that the ground movements and the lining deformations during tunnel excavation depend on the distance between the tunnels' axis and the excavation phase shift.

• 한국관개배수논문집
• /
• 제13권2호
• /
• pp.262-273
• /
• 2006

The Soil and Water Assessment Tool (SWAT) model has been widely used in hydrology and sediment simulation worldwide. In most cases, the SWAT model is first calibrated with adjustments in model parameters, and then the validation is performed. However, very little study regarding the effects on SWAT estimation of subwatershed delineation was performed. Thus, the SWAT model was applied to the Doam-dam watershed with various threshold values in subwatershed delineation in this study to examine the effects on the number of subwatershed delineated on SWAT estimation. It was found the flow effect of subwatershed delineation is negligible. However there were huge variations in SWAT estimated sediment, T-N, and T-P values with the use of various threshold value in watershed delineation. Sometimes these variations due to watershed delineation are beyond the effects of parameter adjustment in model calibration and validation. The SWAT is a semi-distributed modeling system, thus, the subwatershed characteristics are assumed to be the same for all Hydrologic Response Unit (HRU) within that subwatershed. This assumption leads to variations in the SWAT estimated sediment and nutrient output values. Therefore, it is strongly recommended the SWAT users need to use the HUR specific slope length and slope value in model runs, instead of using the slope and the corresponding slope length of the subawatershed to exclude the effects of the number of subwatershed delineated on the SWAT estimation.

• 터널과지하공간
• /
• 제25권3호
• /
• pp.275-283
• /
• 2015

연약지반에서 지하 공동의 굴착은 지반침하로 인하여 인근 지반 및 구조물에 영향을 끼치게 되고 그 결과 도로 및 시설물의 안정성에 심각한 위험요소로 작용하고 있다. 따라서 구조물의 안정 및 지반보강을 위하여 여러 가지 공법과 주입재료들을 사용하고 있다. 본 연구에서는 실내 모형실험을 실시하여 연약지반에서 다양한 종류의 지하공동 굴착 시 상부 지반보강에 따른 지반침하량을 비교 분석하였으며 3차원 유한차분법에 근거한 FLAC 3D를 사용하여 지하공동 굴착에 따른 지반 침하를 수치적으로 모사했다. 모형실험에서의 결괏값과 수치해석의 결괏값이 비교적 일치하는 결과를 토대로 수치해석상에서 보강범위를 달리하여 지반 침하량을 비교 분석하였으며, 그 결과 다양한 종류의 지하공동을 굴착함에 따른 지반침하 발생 여부 및 침하량 산정을 3차원 수치해석을 통해 보다 정확하게 구현할 수 있으며, 본 연구 결과는 지반침하 방지공법의 자료로 이용될 수 있을 것으로 사료된다.

• 한국수자원학회논문집
• /
• 제31권2호
• /
• pp.177-187
• /
• 1998

하천과 대수층이 연결된 계에서 분산오염원이 유입될 경우에 지하수 수질을 평가할 수 있는 공간적분모형을 제안하였다. 제안된 공간적분모형은 불포화대의 영향이 고려되었으며, 다양한 수문 및 대수층 모의 조건에서 Richards 방정식과 이송-분산 방정식의 공간분포모형에 대한 수치해와 비교를 통하여 공간적분모형을 테스트하였다. 비교 결과에 의하면, 분산도비와 대수층의 두께가 큰 경우를 제외하고는 공간적분모형과 공간분포모형사이의 포화대수층의 평균농도 및 지하수유출의 평균농도는 일치된 반응을 보여주고 있다. 그리고 분산도비와 대수층의 두께가 큰 계에서는 비선형 공간적분모형이 선형 공간적분모형보다 더 좋은 결과를 보여주었다.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.681-690
• /
• 2013

Watershed models have been increasingly used to support an integrated management of land and water, non-point source pollutants, and implement total daily maximum load policy. However, these models demand a great amount of input data, process parameters, a proper calibration, and sometimes result in significant uncertainty in the simulation results. For this reason, uncertainty analysis is necessary to minimize the risk in the use of the models for an important decision making. The objectives of this study were to evaluate three different uncertainty analysis algorithms (SUFI-2: Sequential Uncertainty Fitting-Ver.2, GLUE: Generalized Likelihood Uncertainty Estimation, ParaSol: Parameter Solution) that used to analyze the sensitivity of the SWAT(Soil and Water Assessment Tool) parameters and auto-calibration in a watershed, evaluate the uncertainties on the simulations of runoff and sediment load, and suggest alternatives to reduce the uncertainty. The results confirmed that the parameters which are most sensitive to runoff and sediment simulations were consistent in three algorithms although the order of importance is slightly different. In addition, there was no significant difference in the performance of auto-calibration results for runoff simulations. On the other hand, sediment calibration results showed less modeling efficiency compared to runoff simulations, which is probably due to the lack of measurement data. It is obvious that the parameter uncertainty in the sediment simulation is much grater than that in the runoff simulation. To decrease the uncertainty of SWAT simulations, it is recommended to estimate feasible ranges of model parameters, and obtain sufficient and reliable measurement data for the study site.