• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.195-198
• /
• 2002

Nitrogen pollution in urban and rural groundwater is a common problem and poses a major threat to drinking water supplies based on groundwater. In this work, the kinetics of nitrification-denitrification coupled reactions are modeled and new reaction modules for the RT3D code (Clement, 1997) describing the fate and transport nitrogen species, dissolved oxygen, dissolved organic carbon, and biomass are developed. The proposed nitrogen transformations and transport model showed very good match with results of a conceptual model. However, the model simulation results for the major reactive species should be tested for validation using experimental and field data.

• Geomechanics and Engineering
• /
• v.6 no.4
• /
• pp.321-340
• /
• 2014

Uplift response of symmetrical circular anchor plates has been evaluated in physical model tests and numerical simulation using Plaxis. The behavior of circular anchor plates during uplift test was studied by experimental data and finite element analyses in loose sand. Validation of the analysis model was also carried out with 50 mm, 75 mm and 100 mm diameter of circular plates in loose sand. Agreement between the uplift responses from the physical model tests and finite element modeling using PLAXIS 2D, based on 100 mm computed maximum displacements was excellent for circular anchor plates. Numerical analysis using circular anchor plates was conducted based on hardening soil model (HSM). The research has showed that the finite element results gives higher than the experimental findings in the loose sand.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.393-396
• /
• 2005

The reactive transport model on the biologically mediated sequential nitrate transformation and its subsequent transport was developed and tested. This model was coded as a reaction module within the RT3D framework (Clement, 1997). Transports of the reasonable six mobile solutes (dissolved organic carbon, $O_2,\;{NO_3}^-,\;{NO_2}^-,\;N_2O,\;N_2$) and two immobile microbes were simulated. The simulation results gave a reasonable match with supposed transport pattern. For the next step, the developed model will be validated against experimental data.

• Advances in environmental research
• /
• v.5 no.4
• /
• pp.263-282
• /
• 2016

Contaminant transport in groundwater induces major threat and harmful effect on the environment; hence, the fate of the contaminant migration in groundwater is seeking a lot of attention. In this paper a two dimensional numerical flow and transport model through saturated layered soil is developed. Groundwater flow and solute transport has been simulated numerically using proposed model. The model implements the finite volume time splitting method to discretize the main equations. The performance, accuracy and efficiency of the out coming numerical models have been successfully examined by two test cases. The verification test cases consist of two-dimensional, groundwater flow and solute transport. The final purpose of this paper is to discuss and compare the shape of contaminant plume in homogeneous and heterogeneous media with different soil properties and control of solute transport using a zone for minimizing the potential of groundwater contamination; furthermore, this model leads to select the effective and optimum remedial strategies for cleaning the contaminated aquifers.

• Geomechanics and Engineering
• /
• v.11 no.5
• /
• pp.725-738
• /
• 2016

A theoretical study of the behavior of structured soils is presented herein. By introducing the effect of soil structure and loading history into the Cam Clay model, a new model was formulated. The concept of differing void ratios was modified to combine structural parameters and the over consolidation ratio, and an evolution law was proposed. Upon introducing the concept of the subloading yield surface, a new two-yield surface model was obtained. The predicted results were compared to the experimental data, demonstrating that the new model provided satisfactory qualitative modeling of many important features of structured soils.

• Water for future
• /
• v.23 no.3
• /
• pp.351-361
• /
• 1990

Considering the hydrological los components such as evapotranspiration, interception, surface storage and infiltration, a rainfall excess model for forest watersheds is derived. The Morton model is adopted to estimate the evapotranspration under the wetted environmental conditions. Canopy effects and ground cover interception storage rates are used to determine the net rainfall rates arrived on the surface soil. The infiltration capacity on the permeable surface is estimated from the revised Green-Ampt model derived for the natural unsteady rainfall events. The rainfall excess model derived is applied with the data from Jangpyung watershed, one of the representative watersheds of IHP. Parameters which are calibrated with the data from ten storms, the hydrometeorological, land use and soil informations, and other researchers' papers are presented.

• Geomechanics and Engineering
• /
• v.6 no.6
• /
• pp.593-612
• /
• 2014

The uplift response of symmetrical square anchor plates has been evaluated in physical model tests and numerical simulations using Plaxis. The behavior of square anchor plates during uplift test was studied by experimental data and finite element analyses in loose sand. Validation of the analysis model was also carried out with 50 mm, 75 mm and 100 mm Length square plates in loose sand. Agreement between the uplift responses from the physical model tests and finite element modeling using PLAXIS 2D, based on 100 mm computed maximum displacements was excellent for square anchor plates. Numerical analysis using square anchor plates was conducted based on the hardening soil model (HSM). The research has shown that the finite element results are higher than the experimental findings in loose sand.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.3
• /
• pp.61-71
• /
• 2001

A regional master recession curve model to predict groundwater discharges in a given basin was presented. Considering a stream-aquifer system, both theoretical and experimental baseflow equations were compared and a practical groundwater discharge equation was derived, The groundwater discharge equation was expanded and transformed to the discharge equation at the basin exit. For practical use, the equation was expressed as a function of watershed area, the mean slope of basin and the recession constant. To verify the model, the model was applied to Ssang-chi basin where long-term and temporal hydrological data at the upper basin were collected. Our results show that a master recession curve of unmeasured area can be predicted.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.201-207
• /
• 2013

Soil liquefaction by tsunami or wave induced currents can cause serious damages to coastlines and coastal infrastructures. Although liquefaction caused by regular waves over sea beds has been extensively investigated, studies of tsunami-induced liquefaction near coastal area have been relatively rare. In this work, the hydraulic scale model has been designed and constructed to investigate the variations of wave height and sediment transport by tsunami. The distorted hydraulic scale model based on the Froude similarity was adopted to represent hydrodynamics and sediment transport in a coastal area. The scale model was composed of control box, screw axis, wave paddle and rotating coastal structure.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.2
• /
• pp.1-14
• /
• 2019

This study analyzed the relativity between block stream and talus distributions by employing a likelihood ratio approach. Possible distribution sites for each debris slope landform were extracted by applying a spatial integration model, in which we combined fuzzy set model, Bayesian predictive model, and logistic regression model. Moreover, to verify model performance, a success rate curve was prepared by cross-validation. The results showed that elevation, slope, curvature, topographic wetness index, geology, soil drainage, and soil depth were closely related to the debris slope landform sites. In addition, all spatial integration models displayed an accuracy of over 90%. The accuracy of the distribution potential area map of the block stream was highest in the logistic regression model (93.79%). Eventually, the accuracy of the distribution potential area map of the talus was also highest in the logistic regression model (97.02%). We expect that the present results will provide essential data and propose methodologies to improve the performance of efficient and systematic micro-landform studies. Moreover, our research will potentially help to enhance field research and topographic resource management.