• Geomechanics and Engineering
• /
• v.34 no.3
• /
• pp.303-316
• /
• 2023

With the development and utilization of urban underground space, the artificial ground freezing technology has been widely used in the construction of underground engineering in soft soil areas. The mechanical properties of soft clay changed greatly after freezing and thawing, which affected the seismic performance of underground structures. In this paper, a series of triaxial tests were carried out to study the dynamic response of the freezing-thawing clay under the seismic load considering different dynamic stress amplitudes and different confining pressures. The reduction factor of dynamic shear stress was determined to correct the amplitude of the seismic load. The deformation development mode, the stress-strain relationship and the energy dissipation behavior of the soft clay under the seismic load were analyzed. An empirical model for predicting accumulative plastic strain was proposed and validated considering the loading times, the confining pressures and the dynamic stress amplitudes. The relevant research results can provide a theoretical reference to the seismic design of underground structures in soft clay areas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.194-194
• /
• 2022

정확한 강우-유출 해석은 하천 홍수예경보, 댐 유입량 산정 및 방류량 결정 등 수자원 관리 및 계획수립에 있어 중요하며 밀도높은 관측망(raingauge network)으로 부터 수집된 강우 자료는 강우-유출 해석의 가장 중요한 기초 자료로 활용된다. 본 연구 대상 지역인 메콩강 유역은 국가공유하천(6개국: 중국, 라오스, 태국, 미얀마, 베트남, 캄보디아)은 기초 자료 수집이 어렵고, 구축된 자료의 양적, 질적 품질이 국가별로 상이하여 수문해석 결과의 불확실성을 높일 우려가 있다. 최근 원격탐사 기술의 발달로 격자형 글로벌 강수자료의 획득이 용이해졌으며, 이를 활용한 다양한 연구들이 수행된 바 있다. 이에 본 연구에서는 준 분포모형인 SWAT (Soil & Water Assessment Tool) 모형을 활용하여 격자형 위성 강수 자료(TRMM, GSMaP, PERSIANN-CDR)와 격자형 지점 강수 자료(APHRODITE, GPCC)의 메콩강 유역 강우-유출 모의에 대한 성능을 평가하였다. 유출량 산정을 위한 관측소로는 Luang Prabang, Pakse, Stung Treng, Prek Kdam 관측소를 선정하였으며 지점강수량 정보가 비교적 충분한 2000-2007년을 대상으로 매개변수 보정(2000-2003) 및 유출모의 검증(2004-2007)을 수행하였다. 격자형 강우를 이용한 유출분석 결과, APHRODITE, GPCC 및 TRMM이 다른 격자형 강수 자료(GSMaP, PERSIANN-CDR)보다 우수한 성능을 보였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.489-489
• /
• 2022

도시의 가로수들이 열악한 부지 조건과 적절하지 않은 가로수 관리로 인해 죽는 현상이 몇몇 도시에서 발생하고 있다. 열악한 부지 조건과 적절하지 않은 가로수 관리에는 생물학적·기상학적으로 많은 요소들이 있고, 그 밖에 도시 설계로 인한 요인들로 다양하다. 그중 연구지역인 춘천시에서는 가로수가 죽는 원인 중 토양수분이 가장 큰 원인일 것이라고 판단하였다. 토양수분 분포의 시간적 공간적 특성들은 증발, 침투, 지하수 함량, 토양 침식, 식생 분포 등을 지배하는 중요한 요소이며, 토양수분 연구는 물순환과정의 특성을 이해하는데 있어서 필수적인 과정이다. 하지만 토양수분 분석은 중요성에 비해 활발한 연구가 이루어지지 않고 있으며, 특히 가로수 토양수분에 대해서는 연구가 없는 실정이다. 따라서 가로수 토양수분 모니터링을 실시하였고, 장기적인 가로수 관리를 위해 모델링을 하였다. 모델링 기초자료 확보를 위한 토양수분 모니터링은 춘천시의 가로수 중 세 군데를 선정해 각각 10, 20, 30 cm에 센서를 설치하였다. 이를 통해 약 1년간의 토양수분 함량 데이터를 수집하였고, 모니터링 지점의 토양을 샘플링 후 분석하여 물리, 화학, 생물성 데이터를 수집하였다. 모델링은 RZWQM(Root Zone Water Quality Model)을 이용하여 시나리오를 구성하였다. 모델링 결과를 활용해 가로수 및 도시 표토 기능을 위협하는 요인을 분석하였다.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.109-119
• /
• 2023

Ground subsidence in urban areas due to excessive development and degraded underground facilities is a serious problem. Geophysical surveys have been conducted to estimate the distribution and scale of cavities and subsidence. In this study, electrical resistivity tomography (ERT) was performed near an area of road subsidence in an urban area. The subsidence arose due to groundwater leakage that carried soil into a neighboring excavation site. The ERT survey line was located between the main subsidence area and an excavation site. Because ERT data are affected by rapid topographic changes and surrounding structures, the influence of the excavation site on the data was analyzed through field-scale numerical modeling. The effect of an excavation should be considered when interpreting ERT data because it can lead to wrong anomalous results. A method for performing 2D inversion after correcting resistivity data for the effect of the excavation site was proposed. This method was initially tested using a field-scale numerical model that included the excavation site and subsurface anomaly, which was a loosened zone, and was then applied to field data. In addition, ERT data were interpreted using an existing in-house 3D algorithm, which considered the effect of excavation sites. The inversion results demonstrated that conductive anomalies in the loosened zone were greater compared to the inversion that did not consider the effects of excavation.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.545-557
• /
• 2024

A real-case incident occurred where a 9-meter-high segment of a pre-fabricated concrete separation wall unexpectedly collapsed. This collapse was triggered by improperly depositing excavated soil against the wall's back, a condition for which the wall segments were not designed to withstand lateral earth pressure, leading to a flexural failure. The event's analysis, integrating technical data and observational insights, revealed that internal forces at the time of failure significantly exceeded the wall's capacity per standard design. The Lattice Discrete Particle Model (LDPM) further replicates the collapse mechanism. Our approach involved defining various parameter sets to replicate the concrete's mechanical response, consistent with the tested compressive strength. Subsequent stages included calibrating these parameters across different scales and conducting full-scale simulations. These simulations carried out with various parameter sets, were thoroughly analyzed to identify the most representative failure mechanism. We developed an equation from this analysis that quickly correlates the parameters to the wall's load-carry capacity, aligned with the simulation. Additionally, our study examined the wall's post-peak behavior, extending up to the point of collapse. This aspect of the analysis was essential for preventing failure, providing crucial time for intervention, and potentially averting a disaster. However, the reinforced concrete residual state is far from being fully understood. While it's impractical for engineers to depend on the residual state of structural elements during the design phase, comprehending this state is essential for effective response and mitigation strategies after initial failure occurs.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.481-496
• /
• 2024

Internal erosion around pipes can lead to the failure of earth dams through various mechanisms. This study investigates the displacement patterns in earth dam models under three different failure modes due to internal erosion, using digital image correlation (DIC) methods. Three failure modes—erosion along a pipe (FM1), pipe leakage leading to soil erosion (FM2), and erosion in a pipe due to defects (FM3)—are analyzed using two- and three-dimensional image- processing techniques. The internal displacement of the cross-sectional area and the surface displacement of the downstream slope in the dam models are monitored using an image acquisition system. Physical model tests reveal that FM1 exhibits significant displacement on the upper surface of the downstream slope, FM2 shows focused displacement around the pipe defect, and FM3 demonstrates increased displacement on the upstream slope. The variations in internal and surface displacements with time depend on the segmented area and failure mode. Analyzing the relationships between internal and surface displacements using Pearson correlation coefficients reveals various displacement patterns for the segmented areas and failure modes. Therefore, the image-based characterization methods presented in this study may be useful for analyzing the displacement distribution and behavior of earth dams around pipes, and further, for understanding and predicting their failure mechanisms.

• Geomechanics and Engineering
• /
• v.37 no.1
• /
• pp.31-48
• /
• 2024

To stabilize the excavations in urban area, soil anchorage is among the very common methods in geotechnical engineering. A more efficient deformation analysis can potentially lead to cost-effective and safer designs. To this end, a total of 116 three-dimensional (3D) finite element (FE) models of a deep excavation supported by tie-back wall system were analyzed in this study. An initial validation was conducted through examination of the results against the Texas A&M excavation cases. After the validation step, an extensive parametric study was carried out to cover significant design parameters of tie-back wall system in deep excavations. The numerical results indicated that the maximum horizontal displacement values of the wall (δ_hm) and maximum surface settlement (δ_vm) increase by an increase in the value of ground anchors inclination relative to the horizon. Additionally, a change in the wall embedment depth was found to be contributing more to δ_vm than to δ_hm. Based on the 3D FE analysis results, two simple equations are proposed to estimate excavation deformations for different scenarios in which the geometric configuration parameters are taken into account. The model proposed in this study can help the engineers to have a better understanding of the behavior of such systems.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2274-2281
• /
• 2024

RESRAD-ONSITE v7.2 code is used to assess the radiation effects on a farmer resident located in a hypothetical contaminated site planned for the first nuclear power plant project in Vietnam, namely Ninh Thuan 1, after decommissioning. Derived concentration guideline levels are preliminarily calculated for 17 radionuclides that are assumed to remain on a contaminated surface soil with an initial concentration of 1 pCi/g in the protected area of NPP site. For a reliable estimation, the site-specific conditions regarding the geological, hydrological, climate, and occupancy data gathered from the Feasibility Study Report (FSR) and relevant literatures for the Ninh Thuan 1 NPP site is employed as input parameters. The calculation results indicate that the peak of total exposure dose is estimated to be ca. 0.191 mSv/yr at the time of decommissioning, and then decrease over time. Furthermore, the protected site is assessed to be released at ca. 6.71 years after decommissioning under the regulation on radiation protection in Vietnam. Through this study, a radiation exposure model for residents living near the Ninh Thuan 1 NPP is preliminarily established by using the RESRAD-ONSITE code, which are expected to be useful for future implementation of the Ninh Thuan 1 NPP project in Vietnam.

• Journal of Wind Energy
• /
• v.13 no.3
• /
• pp.22-32
• /
• 2022

Conventionally, a monopile that has reached the end of its design life is required to be removed. While monopiles have been left on site due to economic and technical reasons, cases of decommissioning monopoles have recently been reported, and a decommissioning market is emerging. This paper introduces a new type of monopile with decreased pull-out resistance by prior lifting up of a wedge segment installed on the outer wall of the monopile; consequently, the monopile can be dismantled easily from the operation site. The study conducted several numerical investigations, using finite element analysis, of the effect of segment pull-out for the monopile. After pulling out several segment sizes in the numerical model represented by soil element deletion corresponding to the segment volumes, the pull-out forces were compared to those of the conventional monopile. The results showed that for a segment with a thickness of 5 cm and circumferential angle of 30°, the pull-out resistance of the proposed monopile was reduced by 32.5% relative to that of a conventional monopile. Also, the results indicated that an increase in the segment angle was a more effective way to reduce resistance than that of the thickness.

• Computers and Concrete
• /
• v.34 no.3
• /
• pp.297-305
• /
• 2024

This study investigates the buckling behavior of CNTRC beams on a Winkler-Pasternak elastic foundation, considering their stiffness. To achieve the highest accuracy, the shear stiffness is taken into account based on the Higher-order Shear Deformation Theory (HSDT). A novel exponential power-law distribution of the CNT volume fraction across the beam thickness is employed to model CNTRC beams. Various reinforcement patterns are incorporated into the polymer matrix, featuring single-walled carbon nanotubes (SWCNT) that are both aligned and distributed. The effective mechanical properties of the CNTRC beam are predicted using the rule of mixtures. Hamilton's principle is applied to derive the differential equations of motion. This theoretical framework enables the validation of the approach by comparing numerical simulation results with previous studies. The impact of the exponent order (n), CNT volume fraction, geometrical ratio, and Winkler-Pasternak parameters on buckling analysis is thoroughly presented and discussed. The results indicate that, among the different types of analyzed CNTRC beams, the X-Beam pattern demonstrates the highest buckling load capacity.