• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.317-327
• /
• 2001

For soils with high void ratios, the inverse method of utilizing results obtained from centrifuge model test was used to find the constitutive relation of effective stress - void ratio - permeability whereas conventional oedometer test and constant rate of strain consolidation test were also used to fine its relation at ranges of relatively low void ratio. Results of column test about settlement of interface and pore pressure and distribution with time were compared with numerically estimated values to confirm such a constitutive relation as obtained from the inverse method. Consolidational settlement in dredged and reclaimed ground, where the consolidation was in progress, was predicted by using the numerical technique implemented with the finite strain consolidation theory.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.337-343
• /
• 1994

Numerical analysis was applied to a simplified two-dimensional Ondol heating model which consists of heating space on the top of it along with radiant and convective heating floor panel, flue channel in the midway and rectangular underground soil region at the bottom. These three components constitute a system thermally coupled at the top and bottom interfaces of the flue channel. Investigated in the present paper are effects with variations of the Reynolds numbers of 100, 200, and 300, Grashof numbers of $0.1{\times}10^6$ and $0.3{\times}10^6$ and aspect ratios of 15 and 20 on the heat transfer and fluid flow characteristics of two-dimensional Ondol heating model by computer simulation.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.3
• /
• pp.20-25
• /
• 2004

For the structural foundation above the soft clay layer conditions, the design charts are first presented for the evaluation of both bearing capacity and total settlement in the basic raft foundation system. wad settlement relationship curves are used to evaluate the ultimate soil bearing capacity. The total settlement is evaluated by applying various traditional factors into the ultimate bearing capacity. Then, the parametric studies are carried out for the piled-raft foundation system. In the numerical analysis, the elasto-pastic finite element model(Mohr-Coulomb model) is used to present the foundation response and design charts, which enable the determination of the raft size and pile length and spacing.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.287-291
• /
• 1999

This study was performed to develop an information processing system for the sound conservation of soil and groundwater resources. The system contains the geographic spatial information system(GSIS), and the numerical model of groundwater flow and contamination. Numerical models (MODFLOW, MOC3D, MT3D, PMPATH, PEST, UCODE) and GSIS(ArcView) were integrated for the construction of an integrated management system of subsurface environment. The developed system was applied to the management of three mineral water companies located in clean mountain area. The impact of pumping over the overall catchment basin was modeled using the developed system for the decision of future management criteria.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.433-440
• /
• 2001

This study was to analyze characteristics of soils reinforced by FPF(Fibrillated Polypropylene Fiber). Laboratory test, model test and field tests were performed on soils reinforced by fibers, to evaluate the shear strength characteristics. For the silty sand, clayey sand and silty clay, the influence of fiber shape, fiber length and fiber content were evaluated from compaction test, direct shear test, uniaxial test, california bearing ratio(CBR) test. Fibrillated type fiber, 5cm long with a content of 0.5% shows 5∼30% increase of friction angle and 7∼55 percent increase of CBR value.

• Geotechnical Engineering
• /
• v.13 no.5
• /
• pp.125-132
• /
• 1997

It is observed that debris mitred with a wide range of soil particles and water moves downwards like viscous fluid soon after a landslide has triggered. An Assumption can be made from the field observation that the debris flow behaves as a kind of non(non-Newtoniron) Newtonian fluid which has non linear viscosity. In this study, a series of viscosity tests are carried out to measure rheological properties of debris by using a viscometer with semples taken from a landslide site. It is proved that debris flows behave as Bingham plastic mod el of non-Newtonian fluid. This model can be used predict the movement of debris flows.

• Journal of the Korean Society of Safety
• /
• v.10 no.4
• /
• pp.3-8
• /
• 1995

Anchors find their use in providing tie-back resistance for submerged footings, transmission towers, tunnels and ocean structures. Laboratory model teats were performed for the short-term net ultimate uplift capacity of a circular anchors with respect to various embedment depths and moisture content in saturated bentonite. The tests have been conducted with the anchor at two different moisture contents. Based an the model test results, empirical relationships between the net load, rate of strain, and time have been developed. Test results are as follows. 1) In creep tests for load versus ultimate uplift capacity, the displacement of plate anchors rapidly increases during the primary stage but thereafter becomes constant over a period of time. 2) Displacement increased with the increase of the sustain load and embedded ratio in soil. 3) If the load is less than or equal to 75% of the short-term ultimate uplift capacity, a complete pullout does not occur due to creep.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.83-88
• /
• 2011

Annually, many parts of the Korea have been damaged from the localized heavy rain and/or typhoons which peak between June and September, which result in extensive financial and human loss. Especially, because the most area of Gangwon province is composed of the steep slope mountains, the damages by the debris flow or land-sliding are more frequent and the frequency has been increased. To analyze the characteristics and causes of these debris flow disasters, lots of study are recently being conducted through database of weather, hydrologic, soil etc using a GIS or remote sensing. In this study, we applied GIS method to analyze the risk of the debris flow area. With the statistical analysis and infinite slope stability model(SINMAP), the debris flow risk level of the mountain slope was generated. As a result, the GIS statistical analysis showed high correlation that former model of SINMAP in determining the debris flow risk area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.6
• /
• pp.520-529
• /
• 2015

The ambient $PM_{2.5}$ samples were collected by $PM_{2.5}$ sampler from September 2010 to December 2012 at Daegu University, Gyeongsan. A total of 260 samples were collected and 27 species were analyzed by inductively coupled plasma, ion chromatography, and thermal optical reflectance methods. Factor analysis identified four sources such as biomass burning source/secondary aerosol source, soil source, industry source, and incinerator source/mobile source. Also, backward trajectories were calculated using HYSPLIT 4 (Hybrid single-particle lagrangian integrated trajectory) model and PSCF (Potential source contribution function) model was applied to identify the possible source locations of carbonaceous species and water soluble ions species. PSCF results showed that the possible source locations of most chemical constituents measured in Gyeongsan were the industrial areas in the eastern coast of China, northeast regions of China, the Gobi Desert, and east sea of Korea.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.31-32
• /
• 2003

A dynamic multimedia model with 2-dimensional spatial resolution, POPsME (Persistent Organic Pollutants in Multimedia Environments), was evaluated by comparing predicted relative concentrations with those measured. A total of 12 polycyclic aromatic hydrocarbons (PAHs) were tested (phenanthrene, anthracene, fluoranthene, pyrene, chrysene, benz (a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenz(a,h)anthracene, benzo(g,h,i)perylene, and indeno(1,2,3-c,d)pyrene). The concentrations were measured in air particulates, water (dissolved phase and suspended solids (ss)), soil, sediment, and leaves of Pinus koraiensis and Prunus serrulata at seven sites in the Seoul and neighboring area (150km x 150km), Korea.