• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.5
• /
• pp.356-364
• /
• 2011

Storage and transfer heat in soils is governed by the soil thermal properties and these properties are therefore needed in many engineering applications, including horizontal ground heat exchanger for ground-coupled heat pumps. This paper presents the evaluation results of the thermal diffusivity of soils (silica, quartzite, limestone, sandstone, granite, and two masonry soils used for the trench backfilling materials of the horizontal ground heat exchanger. To assess this thermal property, we (i) measure the soil thermal conductivities using single-probe method and (ii) use the de Vries method of summing the heat capacities of the soil constituents. The results show that the thermal diffusivity tends to increase as dry soil begins to wet, but it approaches a constant value or even decreases as the soil continues to wet. Combined algorithm with and improved model for the thermal conductivity of soils and the constituent equation provides accurate estimates of the soil thermal diffusivity.

• Advances in concrete construction
• /
• v.10 no.4
• /
• pp.311-317
• /
• 2020

Performance of Sustainable materials continues through using of recycled waste construction materials to minimize the utilization of the natural resources. The cement industry is a major source of CO₂ in the atmosphere which is the main cause of global warming. Replacement of OPC with other sustainable cementitious materials has been the most interesting area of researches. This investigation focuses on the properties of alkali-activated mortar with the different replacement ratios of ceramic tile powder (CTP) by fine soil powder (FSP) (0 to 100)% and different molarities of sodium hydroxide concentrations. The experimental program was conducted by examining the compressive strength, water absorption, and water sorptivity. The results showed that the compressive strength of the specimens at age of (28, 56, and 90 days) increases with an increase in the amount of fine soil powder content and decreases at the age of 120 days. Also, minimum water absorption at the age of 90 days was found in the mixes containing 100% fine soil powder. However, fine soil powder replacement had a negative effect on the sorptivity and water absorption values at the age of 120 days. On the other hand, the 12M sodium hydroxide concentration was considered the optimum concentration compared to other concentrations.

• Korean Journal of Environmental Biology
• /
• v.23 no.4
• /
• pp.383-389
• /
• 2005

The effect of different mulching materials on mungbean production was studied. The general objective was to assess the ecological effects of mulching materials in sustainable mungbean production. Specifically, the study aimed to determine the effects of different mulching materials on the chemical, physical and biological soil properties, on weed control and yield, and to identify mulching materials that are environmentally friendly in mungbean production. The experiment was conducted at the Fruit and Vegetables Seeds Center, Science City of $Mu/tilde{n}oz$, Nueva Ecija, Philippines from May to July 2004. The initial soil chemical properties were: pH of 6.4, 2.0 percent organic matter content, 0.10 percent total nitrogen, 22 ppm phosphorus, and 370 ppm available potassium. The soil microbial loads were $8\times10^4\;CFU\;g^{-1}$ for bacteria and $14\times10^4\;CFU\;g^{-1}$ for fungi. Mushroom spent mulch increased soil organic matter with an average of 3.13 percent, nitrogen with an average of 0.16 percent and the highest number of bacterial count with $3.4\times10^8\;CFU\;g^{-1}$. Use of mulch, except rice straw mulch, generally increased mungbean yield. The best mulching material for high yield production of mungbean was black polyethylene plastic film, although environmentally unfriendly.

• Korean Journal of Agricultural Science
• /
• v.27 no.1
• /
• pp.1-4
• /
• 2000

To know the effect of soil treatment with some microbial materials on growth and yield in Korean ginseng, the investigation was undertaken. Significant increases on growth and yield of Korean ginseng plants were achieved by treating soil with microbial materials. Soil treatment with microbial materials resulted in up to 32-68% increment in fresh weight of roots in a 5 month period. The mechanism by which these microbial materials enhance plant growth and root yield may be associated with changes in the composition of rhizosphere microbial flora.

• Mycobiology
• /
• v.38 no.2
• /
• pp.97-101
• /
• 2010

Calocybe indica, a tropical edible mushroom, is popular because it has good nutritive value and it can be cultivated commercially. The current investigation was undertaken to determine a suitable substrate and the appropriate thickness of casing materials for the cultivation of C. indica. Optimum mycelial growth was observed in coconut coir substrate. Primordia initiation with the different substrates and casing materials was observed between the 13th and 19th day. The maximum length of stalk was recorded from sugarcane leaf, while diameter of stalk and pileus, and thickness of pileus were found in rice straw substrate. The highest biological and economic yield, and biological efficiency were also obtained in the rice straw substrate. Cow dung and loamy soil, farm-yard manure, loamy soil and sand, and spent oyster mushroom substrates were used as casing materials to evaluate the yield and yield-contributing characteristics of C. indica. The results indicate that the number of effective fruiting bodies, the biological and economic yield, and the biological efficiency were statistically similar all of the casing materials used. The maximum biological efficiency was found in the cow dung and loamy soil casing material. The cow dung and loamy soil (3 cm thick) was the best casing material and the rice straw was the best substrate for the commercial cultivation of C. indica.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.53-67
• /
• 2008

The principle goal of environmentally-friendly agriculture is to maintain and conserve water and agriculture environment including drinking water resources by properly using agricultural materials such as agricultural chemicals, chemical fertilizers, and other agricultural materials according to act 19 of foster law of environmentally-friendly agriculture. To achieve these goals, we have to establish Integrated Nutrient Management(INM) and Integrated Pesticide Management(IPM) which are most important core technologies for environmentally-friendly rice cultivation. However, there are lack of criteria and technology for evaluation category according to soil management and its soil classes to practice an environmentally-friendly agriculture. Therefore, we should eatablish the standards to produce the safe agricultural products based on the soil physical and chemical characteristics which are basic properties of soil to accomplish the principle aims of environmentally-friendly agriculture.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.657-664
• /
• 2000

Weak and soft compressible clay deposits are commonly found in natural subgrade soils. These Soils need to be stabilized for using the subbase materials of highway constructions. This paper presents that a chemical treatment using chemical additives comprised of sulfate(SO$_4$) and chloride(Cl) is evaluated for stabilizing soft clay deposits and lime. The physical and mechanical characteristics of soil-lime and additives are described by means of a laboratory study. The study results indicate that the presence of chlorides encouraged the efficiency of lime stabilization, and the use of calcium chloride with quicklime is the best additive for improving soil behavior. The treated soil with lime-calcium chloride can have the adaptability to the subbase materials of highway constructions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.852-857
• /
• 2009

Recently the centrifuge test has been used increasingly to clarify a problem of seepage in dam. However, one of the most difficult challenges in the testing is to conform permeability properties of model ground to the prototype. In order to resolve the problem, a few solutions, such as an increase of pore water viscosity and a regulation of water permeability, are suggested. Although the use of prototype materials is principles if a model test is carried out, the materials of similarity gradation is used in the centrifuge model test because of the nature of the model test for dam. Therefore, we choose the latter method for model ground materials. In this study, the permeability properties of soil-bentonite mixtures are studied through the permeation test using triaxial compaction test apparatus.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.8-15
• /
• 2007

Geotechnical and environmental properties of stone fillers are analyzed by several laboratory experiment to identify the possibility of recycling fillers and sewage dredged soils as construction materials. The result of geotechnjical test shows that the sewage dredged soil is a sandy soil which contains 70-80% sand and is useful as an aggregate of construction site. Stone filler has large fine content, which may disqualifies the use as construction materials. However, this material is still useful as a filler in stone quarries or finished mines. From the environmental test, the liquids leached from two types of materials have satisfied the standard of chemical substances in the soil environment law and no harmful effect in ground pollution is expected when recycling.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.117-126
• /
• 2021

An experimental study was carried out to investigate the applicability of cement-based materials for green soil which is a soil for promoting plant growth. The results show that the shear strength of the green soil mixed with gypsum cement (No.3) was low, but the hardness (23.6mm) and pH value (7.4) was most suitable for the vegetation environment. In addition, the initial vegetation germination of green soil, which improved performance by adding a moisturizer, was slower than that of general green soil, and the conductivity value tended to be slightly higher. On the other hand, the slope adhesion of advanced green soil was high, and it was found that the plant growth rate and the regeneration capacity were superior after time passed.