• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.339-352
• /
• 2022

As environmental criteria items are increased or strengthened, cases of heavy metal contamination by geogenic origin are increasing, and the need to distinguish between natural and anthropogenic origins in soil or groundwater exceeding the standard is increasing. In this study, geochemical occurrences of geogenic heavy metals were identified through statistical processing of the national geochemical map data and evaluation of geochemical characteristics of regions with high geoaccumulation indices. Cobalt, Cr, Cu, Ni, Pb, V, and Zn were targeted for which the national geochemical maps were prepared, and Co, Cr, Ni, and V derived from ultrabasic or ultramafic rocks were classified as factor 1. Copper, Pb and Zn of non-ferrous sulfide origin were classified as factor 2. In particular, enrichment of heavy metals by factor 1 occurs mainly in the serpentine distribution areas of the Chungcheong region, and there is a risk of contamination in neighboring areas. In the case of factor 2, geogenic occurrence is concerned not only in non-ferrous metal mineralization areas such as Taebacksan and Gyeongnam mineralization zones, but also in Au-Ag mineralization areas distributed nationwide.

• Korean Journal of Environment and Ecology
• /
• v.37 no.6
• /
• pp.450-463
• /
• 2023

The objective of this study is to derive the core habitat of the Kirengeshoma koreana Nakai utilizing Habitat Suitability Index (HSI) and Maximum Entropy (MaxEnt) models. Expert-based models have been criticized for their subjective criteria, while statistical models face difficulties in on-site validation and integration of expert opinions. To address these limitations, both models were employed, and their outcomes were overlaid to derive the core habitat. Five variables were identified through a comprehensive literature review and spatial analysis based on appearance coordinates. The environmental variables encompass vegetation zone, forest type, crown density, annual precipitation, and effective soil depth. Through surveys involving six experts, importance rankings and SI (Suitability Index) scores were established for each variable, subsequently facilitating the creation of an HSI map. Using the same variables, the MaxEnt model was also executed, resulting in a corresponding map, which was merged to construct the definitive core habitat map. Out of 16 observed locations of K. koreana, 15 were situated within the identified core habitat. Furthermore, an area historically known to host K. koreana but not verified in the present, Mt. Yeongchwi, was found to lack a core habitat. These findings suggest that the developed models exhibit a high degree of accuracy and effectively reflect the current ecological landscape.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1502-1508
• /
• 2011

Ground anchor expands the hollow wall of settled part and has the structure which resists the designed tensile load by the bearing pressure generated by the wedge of the anchor body pressing in the expanded part. Such ground anchor has been recognized for stability and economicality since 1960s in technologically advanced nations such as Japan and Europe, and in 1970s, the Japan Society of Soil Engineering has established and announced the anchor concept map. The ground anchor introduced in Korea, however, has the structural problem where the tensile strength is comes only from the ground frictional force due to expansion of the wedge body. In an interval where the ground strength is locally reduced due to fault, discontinuation or such, this is pointed out as a critical weakness where the anchor body of around 1.0m must resist the tensile load. Also, in the installation of concrete block, the concentrated stress of concrete block constructed on the uneven rock surface causes damage, and many such issues in the anchor head have been reported. Thus, in this study, by using the expanded bit for precise expansion of settled part, the ground anchor system was completed so that the bearing pressure of ground anchor can be expressed as much as possible, and the bearing plate was inserted into the ground to resolve the existing issues of concrete block. Through numerical analysis and pullout test executed for verification of site applicability, the pullout-behavior characteristics of anchor was analyzed.

• The Korean Journal of Ecology
• /
• v.15 no.2
• /
• pp.117-125
• /
• 1992

TWINSPAN(two-way indicator species analysis), DCCA(detrended canonical correspondence analysis) and polar ordination method wee used so as to analyze the the relation between forest vegetation and hibitat of mudungsan(1, 187m) located in kwangju area. Vegetationsurvey consulted 1:25, 000 topographical map, set up 41 quadrats and analyzed from April, 1990 to August, 1991. Forest vegetation of mudungsan was classifild to quercus acutissima community, fraxinus mandshurica community, quercus mongolica community, quercus serrata community, quercus dentata community, quercus variabilis community, and pinus densiflora community by TWINSPANmethod, and this almost coincide with the result of plar ordination. according to DCCA analysis, P. densiflora community was formed in xeric and low altitude region which soil nutrient was poor, compared with other communities. q. variabilis and q. acutissima community wee distributed in the region that low altitude and organic matter content was comparatively low, but q. acutissima community was formed in a damp region while q. variabilis community in a xeric region. q. mongolica and f. mandshurica formed the communities in a high altitude region, especially f. mandshurica cmmunity was distributed in a high humidity region. According to polar ordination analysis, the forest vegetation was classified to 7 communities by means of environmental gradient such as humidity, organic matter, ph, temperature, c.e.c and P2O5.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.2
• /
• pp.15-26
• /
• 2015

The purpose of this paper is to develop a software tool, PGA-CC (Projection of hydrology via Grid-based Assessment for Climate Change) to evaluate the present hydrologic cycle and the future watershed hydrology by climate change. PGA-CC is composed of grid-based input data pre-processing module, hydrologic cycle calculation module, output analysis module, and output data post-processing module. The grid-based hydrological model was coded by Fortran and compiled using Compaq Fortran 6.6c, and the Graphic User Interface was developed by using Visual C#. Other most elements viz. Table and Graph, and GIS functions were implemented by MapWindow. The applicability of PGA-CC was tested by assessing the future hydrology of South Korea by HadCM3 SRES B1 and A2 climate change scenarios. For the whole country, the tool successfully assessed the future hydrological components including input data and evapotranspiration, soil moisture, surface runoff, lateral flow, base flow etc. From the spatial outputs, we could understand the hydrological changes both seasonally and regionally.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.87-94
• /
• 2012

This study is to evaluate flood inundation and to recommend measures of damage reduction on sediment by concentrated torrential rainfall at Gonjiamcheon Watershed (183.4 $km^2$). Firstly, the SWAT (Soil and Water Assessment Tool) was simulated streamflow and sediment at upstream. Then, we produced a map of floodplain boundary by using HEC-RAS (Hydrologic Engineering Centers River Analysis System) at downstream. The SWAT model was calibrated with 2 years (2008~2009) daily streamflow and validated for another years (2010~2011. 7. 31). The SWAT model was simulated with 3 years (2008~2010) by monthly water quality (Sediment) at Gonjiamcheon water quality station. The streamflow and sediment from SWAT model were input as boundary conditions to HEC-RAS. The results of HEC-RAS indicated that mapping of floodplain boundary was Jiwol and Jiwol 2 district. Additionally, inundation area and depth were assessed and applied BMPs scenario for managing the sediment yield.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.2
• /
• pp.169-175
• /
• 2000

The filamentous soil bacterium Streptomyces coelicolor is known to produce four distinct antibiotics. The simultaneous global regulation for the biosynthesis of those four antibiotics was previously confirmed by absA and absB mutations that blocked all four antibiotics' biosynthesis without influencing their morphological differentiation. To study the complex regulatory cascade that controls the secondary metabolism in Streptomyces, a new abs-like mutation was characterized. namely absR, which is slightly leaky on a complete R2YE medium, yet tight on a minimal medium. A genetic analysis of the absR locus indicated that it is located at 10 o'clock on the genetic map, near the site of absA. A cloned copy of the absA gene that encoded bacterial two-component regulatory kinases did not restore antibiotic biosyntheis to the absR mutant. Accordingly, it is proposed that absR is another abs-type mutation which is less tight than the previously identified absA or absB mutations income medium conditions, and can be used to characterize another global regulatory gene for secondary metabolete formation in S. coelicolor.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.219-226
• /
• 2004

We measure subsidences occurred in a reclaimed coastal land, Noksan industrial complex, by using JERS-1 SAR (1996-1998) and RADARSAT-1 SAR (2002-2003) dataset. SAR with a high spatial resolution (about several or several tens meter) can reveal the two-dimensional distribution of settlement that would be bardly estimated from in situ measurements. The DInSAR results show significant deformation signal associated with soil consolidation. Accuracy of the settlements estimated by 2-pass differential interferometry (DInSAR) is evaluated using the measurements of settlement gauge. A two-dimensional subsidence map is constructed from 7 qualified pairs. Comparing the JERS-1 radar measurements with the ground truth data yields the correlation coefficient of 0.87 (RMSE of 1.44 cm). The regression line shows the gradient of 1.04 and intercepts close to the origin, which implies that the unbiased settlement can be measured by DInSAR technique. The residual settlements are also detected from RADARSAT-1 pairs. The extent and amount of the settlements are matched well with ground truth data.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.6 no.1
• /
• pp.22-29
• /
• 2003

This research aims at investigation of accuracy potential of RTK(Real-Time Kinematic) GPS in combination with Echo Sounder(E/S) for the coastal mapping. Apart from this purpose, the accuracy of ambiguity resolution with the OTF(On The Fly) method was tested with respect to the initialization time. The result shows that the accuracy is better than 1cm with 5-minute initialization in the distance of 10km baseline. The seaside topography was measured by the RTK GPS only, on the other hand the seafloor topography was surveyed in combination of RTK GPS and E/S. Comparing to the volume of seaside measured by RTK GPS and digital topographical map, the difference of only 2% was achieved. This indicates that the coastal mapping. As a result, it has been revealed that every possible noise in surveying could be corrected and the accuracy could be improved. The accuracy of GPS data acquired in real time was as good as that acquired by post processing. It is expected that it will be useful for the analysis of coastal geographic characteristics because DTM(Digital Terrain Model) can be also constructed for the harbor reclamation, the dredging, and the variation of soil movement in a river.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.77-82
• /
• 2003

The purpose of this study is to develop landslide susceptibility analysis techniques using artificial neural network and to apply the developed techniques to the study area of janghung in Korea. Landslide locations were identified in the study area from interpretation of satellite image and field survey data, and a spatial database of the topography, soil, forest and land use were consturced. The 13 landslide-related factors were extracted from the spatial database. Using those factors, landslide susceptibility was analyzed by artificial neural network methods, and the susceptibility map was made with a e15 program. For this, the weights of each factor were determinated in 5 cases by the backpropagation method, which is a type of artificial neural network method. Then the landslide susceptibility indexes were calculated using the weights and the susceptibility maps were made with a GIS to the 5 cases. A GIS was used to efficiently analyze the vast amount of data, and an artificial neural network was turned out be an effective tool to analyze the landslide susceptibility.