• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.163-179
• /
• 2011

This study was to identify the material characteristics and provenance of the crucibles, potteries and roof tiles from the Wonsinheungdong site in Daejeon, Korea. Similar mineral composition of each samples showed by microscopic observation and X-ray diffraction analysis. However, wall thickness and mineral characterization of each ceramic artifacts are quite different. The pottery is characterized by thin wall with 0.5 to 0.7 cm and fine grained clay matrix. While the crucible and roof tile has thick wall with 1.3 to 2.5 cm, poorly sorted texture of many quarz, orthoclase and plagioclase whithin ceramic fabric. And large elonagated voids formed by hydrocarbone of straw during the firing and loose matrix obseved in crucible. All ceramic samples and ground soil of the site show similar mineralogical characteristics geochemical behavior and clay-mineralization degree. This indicates making that the soil is probable to be a raw material of all ceramic from the Wonsinheungdong site. Also, firing temperature of most ceramic artifacts are estimated as 850 of all ceramic from the Wonsinheungdong site. Also, firing temperature of most ceramic artifacts are estimated as 850 to $950^{\circ}C$ but hardest pottery fired high temperature between 1,050 to $1,150^{\circ}C$. The vitreous molten materials interpreted in slag included segregation of copper and tin. But it can not exclude the possibility that the glass molten material because observed reddish and greenish vitreous fine structure under microscopic.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.4
• /
• pp.400-411
• /
• 1989

Moisture related properties of fabrics in dynamic modes are considered to be important in the judgement of the subjective comfort characteristics of clothing fabrics. In the current study, an attempt to improve the cobaltous chloride test method was made which has been known as a convenient screening test for dynamic surface wetness. The color changes of cobaltous chloride treated fabrics on the simulated sweating skin were calibrated against standard color strips. The standard color strips were made of all typs of test fabrics and installed inside of the test tubes containing a series of saturated salt solutions, which gives more quantitative informations on dynamic moisture transfer Influences of fiber types and finishes on dynamic moisture transfer in textiles were studied using a single layer of fabric samples. Fiber types included $100\%$ cotton, C/P 50/50, C/P 35/65. Durable press and soil release finished cotton and C/P 50/50 fabrics were also included. There were significant fiber effects on the dynamic moisture transfer. The order of time taken to reach to the specified $\%$ RH was C/P 35/65$100\%$ cotton fabrics. It was possible to detect significant finish effects by increasing the concentrations of cobaltous chloride solutions. The order of time taken to reach to the specified $\%$ R.H was durable press$100\%$ cotton, C/P 50/50, C/P 35/65 and $100\%$ PET were placed at the inner side of the outer layer and tested. It was shown that cobaltous chloride treated $100\%$ cotton fabirc was easier to detect color changes than C/P blend fabic in the double layer experiments. By placing test sample under the cobaltous chloride treated cotton fabrics, it was able to detect the differences among the test samples, some of which were known to be difficult in padding with cobaltous chloride solutions. Besides, the double layer method would provide with the broader application of the cobaltous chloride method in !uture, since it is possible to test the dynamic moisture transfer of clothing as worn.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.491-505
• /
• 1993

The influences of protease on the removal of various protein soils from cotton fabrics were studied. The human epidermal stratum corneum, hemoglobin and casein were used as protein soils. The soiled fabrics were denatured by steaming for 30 min. before washing and laundered using Terg-O-Tometer under washing conditions. The removal efficiency was evaluated by analysis of protein on the fabrics before and after washing by means of copper-Folin method. The relations between the removal and the characteristics of protease were discussed. Also the degradation of protein were examined by microscopy. The seperation of human epidermal stratum corneum after hydrolysis was examined by SDS-PAGE. The results obtained were as follow : 1. The protein from the soiled cotton fabric was removed effectively by adding protease. The removal of protein was increased in proportion to increasing of the enzyme concentration up to a certain point, but it began to decrease above the point. The removal effect was high in the order of casein>human epidermal stratum corneum>hemoglobin. Especially the protein was more effectively removed in ADS solution(pH 9.5) containing enzyme. 2. When protease was used with ADS. the removal of protein was efficiently showed in relatively short time(5~15min.) compared to using ADS only. It is due to the properties of this enzyme that reacts with very short time. 3. Even at low temperature the removal efficiency of enzyme was relatively higher compared with the activity of enzyme. The removal of protein soil was increased up to a maximum near $50^{\circ}C$, and then decreased. 4. The removal of protein by protease was improved with the increase of alkalinity in the pH range from 9.5 to 11.0 but it began to decrease above pH 11.0. 5. According to the increase of mechanical agitation, the removal effect was increased. But the removal efficiency of protease was more effective compared with the agitation in detergency. 6. According to the SDS-PAGE separation and micrograph it was confirmed that the human epidermal corneum was effectively hydrolysed by the enzyme added. So the fragments of protein were removed more efficiently by means of the interfacial reaction of AOS.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2014

A large amount of acidic waste solution is generated from the practical electrokinetic decontamination equipments for the remediation of soil contaminated with uranium. After filtration of uranium hydroxides formed by adding CaO into the waste solution, the filtrate was recycled in order to reduce the volume of waste solution. However, when the filtrate was used in an electrokinetic equipment, the low permeability of the filtrate from anode cell to cathode cell due to a high concentration of calcium made several problems such as the weakening of a fabric tamis, the corrosion of electric wire and the adhension of metallic oxides to the surface of cathode electrode. To solve these problems, sulfuric acid was added into the filtrate and calcium in the solution was removed as $CaSO_4$ precipitate. A decontamination test using a small electrokinetic equipment for 20 days indicated that Ca-removed waste solution decreased uranium concentration of the waste soil to 0.35 Bq/g, which is a similar to a decontamination result obtained by distilled water.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.31-48
• /
• 2019

The artificial ground freezing (AGF) method is a groundwater cutoff and/or ground reinforcement method suitable for constructing underground structures in soft ground and urban areas. The AGF method conducts a freezing process by employing a refrigerant circulating through a set of embedded freezing pipes to form frozen walls serving as excavation supports and/or cutoff walls. However, thermal expansion of the pore water during freezing may cause excessive deformation of the ground. On the other hand, as the frozen soil is thawed after completion of the construction, mechanical characteristics of the thawed soil are changed due to the plastic deformation of the ground and the rearrangement of soil fabric. This paper performed a field experiment to evaluate the freezing rate of marine clay in the application of the AGF method. The field experiment was carried out by circulating liquid nitrogen, which is a cryogenic refrigerant, through one freezing pipe installed at a depth of 3.2 m in the ground. Also, a piezo-cone penetration test (CPTu) and a lateral load test (LLT) were performed on the marine clay before and after application of the AGF method to evaluate a change in strength and stiffness of it, which was induced by freezing-thawing. The experimental results indicate that about 11.9 tons of liquid nitrogen were consumed for 3.5 days to form a cylindrical frozen body with a volume of about $2.12m^3$. In addition, the strength and stiffness of the ground were reduced by 48.5% and 22.7%, respectively, after a freezing-thawing cycle.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.3
• /
• pp.13-26
• /
• 2015

Many urban areas in Korea suffer from repeated flood damage during intensive rainfall due to an increase in impervious areas caused by rapid urbanization and deteriorating sewage systems. A centralized stormwater management system has caused severe flood damage in an area that has proven unable to accommodate recent climate change and a rise in precipitation. Most flooding prevention projects that have been recently implemented focus on increasing drainage system capacity by expanding the size of sewer pipes and adding pumping stations in downstream areas. However, such measures fail to provide sustainable solutions since they cannot solve fundamental problems to reduce surface runoff caused by urbanization across the watershed. A decentralized stormwater management system is needed that can minimize surface runoff and maximize localized retention capacity, while maintaining the existing drainage systems. This study proposes a stormwater management corridor for the flood-prone watershed in the city of Dongducheon. The corridor would connect the upstream, midstream, and downstream zones using various methods for reducing stormwater runoff. The research analyzed surface runoff patterns generated across the watershed using the Modified Rational Method considering the natural topography, land cover, and soil characteristics of each sub-watershed, as well as the urban fabric and land use. The expected effects of the design were verified by the retainable volume of stormwater runoff as based on the design application. The results suggest that an open space network serve as an urban green infrastructure, potentially expanding the functional and scenic values of the landscape. This method is more sustainable and effective than an engineering-based one, and can be applied to sustainable planning and management in flood-prone urban areas.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.251-257
• /
• 2004

This experiment was carried out to investigate the effects of different covering materials and methods on heat insulation of a plastic greenhouse, growth and yield of tomato. Night air and soil temperatures in a double-layer greenhouse with external multifold thermal cover (MTC; eight-ounce cassimere+four-fold polyform+double-fold non-woven fabric+single-fold polypropylene covering were about $1^{\circ}C$ lower than in that with internal MTC covering, but about $3^{\circ}C$ higher than in that with an EVA film screen. Tomato yield in the external MTC covering increased by $2\%\;and\;19\%$ as compared to that in the internal MTC covering and the non-covering of MTC, respectively, due to its high light transmission and insulation effect. Night air temperatures in a double-layer greenhouse with external MTC covering and with thermal screen (polyester plus aluminium) were $2.2^{\circ}C\;and\;4.5^{\circ}C$ higher than those in a double-layer greenhouse with an external MTC covering and in a double-layer greenhouse equipped an EVA film screen, respectively. Tomato yield in the treatment with external MTC covering and a thermal screen was $18\%\;and\;37\%$ greater than that in the external MTC covering and in an EVA film screen, respectively. Results indicate that tomato could be grown without heating or with minimal heating in a double-layer greenhouse covered with MTC and a thermal screen during the winter season in sourthern regions of Korea.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.8
• /
• pp.23-32
• /
• 2017

For exposed slopes, the weathering degree over time has a major effect on the engineering properties of rocks and the slope stability. Rocks are gradually changed by weathering into soil over time, and the resulting physical, chemical and mechanical changes of rocks affect the engineering stability of the slope. However, there are not many ways to objectively evaluate the weathering degree of a slope. In this study, therefore, to investigate the weathering characteristics of rocks, granite, gneiss and shale distributed in the Chungbuk region were sampled by weathering stage and changes in their component minerals and tissues were investigated. Furthermore, artificial weathering was induced using the freezing and thawing test and quantitatively investigated through porosity and absorption rate. In addition, the changes of microcracks due to artificial weathering were evaluated through box fractal dimension ($D_B$). Through mineralogical study the phase change of constituting minerals, the growth of secondary minerals, the development of micro-cracks and the fabric changes due to weathering were observed. The mineralogical, chemical and engineering evaluations of the weathering degree through the experimental results in this study are expected to be useful for analyzing the weathering characteristics and causes by rock type and for proposing a methodology to evaluate the degradation of physical properties comparatively and quantitatively.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.175-180
• /
• 2002

This study was conducted to examine the effect of row covering materials on the growth and yield of broccoli for early production in the open meld. Materials for plastic tunnel were row-covering (ventilating non-woven fabric), perforated film (2.3％ pore space) and P.E. film. The types of row covers were tunnel and covering period was one months after transplanting. The row cover and perforated film increased daily air and soil temperature by 3~4$^{\circ}C$ and 2~3$^{\circ}C$, respectively as compared to no covering. Also, relative humidities in those treatments were higher than those in P.E. and no covering. The row covering and perforated film enhanced plant growth. Broccoli grew best and abnormal head appeared the least with row covering treatment. Days taken for head formation, however, did not differ between treatments but the weight of curd was over 400 g in the treatment of row covering and perforated film covering. Marketable yield doubled under row covering as compared to no covering. The first harvest time was earlier by two weeks in row-covering. The results of this experiment indicated that covering row-cover film in spring cultivation was effective fer not only yield increase but also quality evaluation in early production of broccoli.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.42-45
• /
• 2003

A Trichoderma sp. SO-571 producing cellulase was isolated from soil, and a pilot-scale cultivation and separation of cellulase were conducted. The cellulase activity was about 14.5 unit/ml after 112 hr of cultivation in a 301 fermenter containing 3.0% cellulose, 4.0% soybean powder, 3.0% wheat bran, 0.5% ($NH_4$)$_2$$SO_4$0.2% urea, 1.0% CSL, 0.5% $KH_2$PO$_4$, and 0.2% Tween 80. The cellulase was purified over 4.6 folds in three steps with 47.86% yield. The optimum pH of cellulase was pH 5.0 and optimum temperature was $60^{\circ}C$. To investigate the effect of the cellulase-treated cellulosic fabric, the weight loss was compared. The weight loss of denim treated with cellulase from Trichoderma sp.SO-571 was 2.9% and that with Celluclast 1.5L was 2.2%. In tencel treatement with enzyme, cellulase showed 0.7% higer weight loss than that with Celluclast 1.5L.