• 환경생물
• /
• 제17권2호
• /
• pp.191-198
• /
• 1999

침엽수와 활엽수 펄프내의 리그닌(lignin) 제거 효과를 개선하기 위해 호알칼리성 균류인 Cephalospotium sp. RYM-202의 xylanase를 표백 전처리하고 이에 의한 펄프의 표백 증진 효과를 조사하였다. 두 종류의 펄프 모두 5$0^{\circ}C$에서 효소반응을 수행하였을 때 펄프내 xylan의 가수분해가 가장 높게 나타났다. 펄프내 xylan의 가수분해를 위한 효소의 최적 pH는 8.0이었으며, pH 9.0에서도 최대활성의 90%이상이 유지되었다. 각각의 펄프 재료에 효소를 전처리한 결과 표백(리그닌 제거)과정의 증진 효과를 보였으며, 침엽수와 활엽수의 kappa number는 각각 3.7과 2.0 ISO units 만큼 감소되었다. 아울러 효소처리 혹은 효소 미처리 펄프를 각각 표백한 후 수초지를 제조하여 종이의 물성을 상호 비교한 바, 효소처리는 종이의 섬유 구조에 큰 영향을 끼치지 않는 것으로 나타났다. 이러한 결과들은 호알칼리성 Cephalospotium sp. RYM-202의 알칼리내성 xylanase가 알칼리 조건하에서의 펄프 전처리 과정에 매우 적합함을 의미한다.

• 한국자원식물학회지
• /
• 제15권3호
• /
• pp.269-278
• /
• 2002

본 연구는 병꽃나무의 화훼작목화를 목적으로 적정 삽목번식 방법을 개발하기 위하여 실시하였다. 병꽃나무의 삽목에 적합한 삽목용토를 개발하기 위하여, 모래, 펄 라이트, 질석 단용과 질석 : 펄라이트(1:1) 혼용처리한 용토에 삽목한 결과 숙지삽, 녹지삽, 반숙지삽 공히 펄라이트 처리구에서 가장 높은 발근율을 보였다. 특히 녹지삽은 모든 처리구에서 70.0~76.7%의 발근율을 보여, 숙지삽에 비해 약2.8배 정도 높은 발근율을 보였다. 병꽃나무의 삽목발근에 미치는 생장조절제의 영향을 조사한 결과 숙지삽의 경우에는 생장조절제의 종류에 관계없이 농도가 높을수록 대조구에 비해 발근이 촉진되는 경향이었다. 특히 NAA 500mg. L$^{-1}$처리구에서 80.0%로 가장 높은 발근율을 나타냈다. 녹지삽의 경우에는 대조구를 제외한 모든 처리구에서 80%이상의 발근율을 보였으며, 특히 NAA 100, 500mg.L$^{-1}$와 IAA 1000mg.L$^{-1}$처리구에서 96.7%의 가장 높은 발근율을 보였다. 반숙지삽의 발근율 또한 생장조절제의 종류에 관계없이 농도가높을수록 발근율이 높아지는 경향을 보였던 반면 고농도인 1000mg.L$^{-1}$처리구에서는 억제되는 것으로 나타났다. NAA 농도 및 침지시간에 따른 발근율은 숙지삽의 경우 농도가 높을수록, 침지시간이 길수록 양호한 경향이었다 녹지삽은 침지 시간이 길수록 현저하게 향상되었으며, 특히 500mg.L$^{-1}$, 30분 침지처리구에서 100%의 발근을 보였다. 반숙지삽의 경우는 처리농도가 높을수록 또한 침지시간이 길수록 발근율이 양호하였으나, 녹지 및 숙지를 삽수로 했던 것에 비해 그 정도는 낮았다.

• 펄프종이기술
• /
• 제36권5호
• /
• pp.62-68
• /
• 2004

The amount of non-lignin components in unbleached and oxygen-delignified kraft pulps and their impact on lignin determinations was investigated. The lignin analyses investigated were kappa number and Klason lignin in conjunction with acid-soluble lignin. The species investigated were loblolly pine, and aspen. The non-lignin components that impacted on lignin determination were residual extractives and hexenuronic acid in unbleached and oxygen-delignified kraft pulps. In the hardwoods, significant amounts of extractives remained after kraft pulping and oxygen delignification. These residual extractives in the hardwood pulps had an impact on the lignin determination, more so on the acid lignin method than kappa number. Hexenuronic acid only impacts on kappa number determination both softwood and hardwood pulps, not on acid lignin. Hexeneuronic acid contributed as lignin content more in aspen than pine pulps, and more in oxygen-delignified than unbleached kraft pulps. Impact of hexenuronic acid on should be corrected both softwood and hardwood pulps for accurate kappa number.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.20-25
• /
• 2009

Residual extractives had a noticeable impact on the brightness of unbleached hardwood kraft pulps (trembling aspen). The brightness-impacting extractives were effectively removed by oxygen delignification. In addition, oxygen delignification was more effective in removing chromophores in hardwood unbleached kraft pulps than in those of softwood (loblolly pine). The residual extractives in unbleached hardwood kraft pulps also affected the pulp color, primarily redness and the L value. These redness-related extractives in unbleached hardwood kraft pulps were also effectively removed by oxygen delignification. There were no significant color differences between untreated and solvent-extracted oxygen-delignified aspen kraft pulps. The residual extractives in unbleached and oxygen-delignified softwood (loblolly pine) kraft pulps did not have a significant impact on either brightness or pulp color.

• 한국약용작물학회지
• /
• 제12권4호
• /
• pp.285-288
• /
• 2004

꾸지뽕나무의 대량번식을 위한 상토와 생장조절제 처리에 따른 삽목 번식에 관한 시험을 수행한 바, 삽목상토는 미풍화토에서 양호하여 숙지삽과 녹지삽에서 각각 56.9%, 62.3%의 발근율을 보였고, 생장조절제는 IBA 100 ppm처리에서 발근이 양호하여 숙지삽에서 57.9%, 녹지삽에서는 89.2%의 발근율을 보였다.

• 한국가구학회지
• /
• 제26권3호
• /
• pp.222-228
• /
• 2015

To evaluate the natural decay durability of valuable domestic softwoods which are used for preservative treatment in our country, we carried out decay test by European standard method. Of all test wood species, Japanese larch (Larix leptolepis) showed slightly high natural decay durability compared to other 4 wood species, Japanese red pine (Pinus densiflora), pitch pine (Pinus rigida), Japanese cedar (Cryptomeria japonica), and scots pine (Pinus sylvestris). However, all of evaluated domestic softwood species in this study caused high weight losses over about 30% in heartwood by test fungus, Poria placenta. We can hardly expect a good natural decay durability from these softwood species. According to the classification of the natural durability of European standard (EN 350-1), they are classified into "Not durable" or "Slightly durable". Therefore, if using these softwoods as exterior materials, we must do preservative treatment to ensure durability.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.50-58
• /
• 1999

This study was carried out to investigate the growth characteristics and propagation methods of L. obtusiloba as a woody landscape plant. The results are obtained as follows: L. obtusiloba was dioecious shrub and shaped with bush type. Leaves were ovate, obtuse, cordate, 7.05 cm long, 7.20 cm wide, and petiole 2.0 cm long. Flowers of L. obtusiloba were diclinous. Soil acidity ranged from pH 4.06 to 5.53 with the lowest at the Mt. Soo-Ri. Mt. Soo-Ri located near factory district, which was considered to damaged by environmental deteoration. While soil organic matter was highest at Mt. Soo-Ri, inorganic nutrients were low. L. obtusiloba grows in the area with low soil acidity and low content of inorganic. Therefore it seemed to be tolerant to air pollution. L. Obtusiloba was high seed germination rate in the plug box and its shoots were longer than seeding box and softwood cutting of L. obtusiloba showed the rooting rate of 50% at 5,000ppm on June 23. To develop a mass propagation method of Korean native L. obtusiloba through an axillary bud culture as a woody landscape plant, about 2∼3 cm shoots induced from explant were subcultured to new media contained different growth regulators. Shoots multiplied most effectively on a WPM containing 1.0 mg/l BA, producing 5.5 shoots with a shoot length of 2.5 cm per shoot explant.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.47-54
• /
• 2015

In this study, effects of kneading treatment on the properties of hardwood bleached kraft pulp (HwBKP), softwood bleached kraft pulp (SwBKP) and hardwood bleached chemi-thermo-mechanical pulp (HwBCTMP) were elucidated with a laboratory two-shaft kneader. Kneading treatment was performed at 30% (w/w) of pulp concentration and the number of passes through the kneader was adjusted from 0 to 10 passes. Then, changes in properties of pulp fibers were evaluated. It was found that fiber characteristics were influenced by kneading treatment. Fiber length was decreased with kneading while other morphological properties such as fiber width, curl and kink became increased as the number of passes through the kneader increased from 0 to 5 passes. The magnitude of changes in the morphological properties of softwood chemical pulp was the largest, followed by hardwood chemical pulp. The morphological properties of HwBCTMP were little influenced by kneading treatment. Swelling of fiber measured by WRV was increased with kneading except of HwBCTMP.

• 한국가구학회지
• /
• 제26권2호
• /
• pp.179-185
• /
• 2015

A study was carried out to observe the 1% aqueous safranine solution flow speed in longitudinal and radial directions of softwood G. biloba, ring-porous wood A. altissima, and diffuse- porouswood D. kaki. In radial direction, ray cells and in longitudinal direction tracheids, vessel and wood fiber were considered for the measurement of liquid penetration speed at less than 12% moisture contents (MC). The length, lumen diameter, pit diameter, end wall pit diameter and the numbers of end wall pits determined for the flow rate. The liquid flow in the those cells was captured via video and the capillary flow rate in the ones were measured. Vessel in hardwood species and tracheids in softwood was found to facilitate prime role in longitudinal penetration. Radial flow speed was found highest in ray parenchyma of G. biloba. Anatomical features like the length and diameter, end-wall pit numbers of ray parenchyma were found also responsible fluid flow differences. On the other hand, vessel and fiber structure affected the longitudinal flow of liquids. Therefore, the average liquid penetration depth in longitudinal tracheids of G. biloba was found the highest among all cells considered in D. kaki and A. altissima.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.37-42
• /
• 1994

The adsorption of water vapor and equilibrium moisture content(EMC) of the specimens for four softwood species dried by conventional- and high temperature method and equilibrated to 15% of the target EMC condition at 25$^{\circ}C$ were determined by oven drying method and with moisture meters. The amount of adsorption for high temperature dried red pine was significantly higher than that of conventional kiln dried wood, while those of eastern white pine, eastern hemlock and Norway spruce were not significantly different between drying methods. EMCs of these four species determined by oven drying method and with capacitive admittance moisture meter were not significantly different between drying methods. EMC of high temperature dried red pine determined with resistance moisture meter was significantly higher than that of conventional kiln dried wood. But EMCs of other species did not show significant difference between drying methods. EMCs of conventional and high-temperature dried wood determined with electronic moisture meters, especially in the case of the capacitive-admittance moisture meter measurement, were lower than that determined by oven drying method.