• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.95-105
• /
• 2008

Recently use of embedded software has been increased to different areas. The requirements and demands for the embedded software have also been altered. In the past, the embedded system was used in simple task and small portable devices but now, the usage of the embedded software has expanded to do much more complex and precise actions in a variety platform environment. The embedded software enables multiple softwares to be integrated into one and at the same time, control it. Currently the biggest challenges embedded software is facing during its development process is the improvement in product production and quality assurance. Our research team has developed an embedded software based on the component (technology or methodology) which both improves production capabilities as well as quality. Additionally, we also established and constructed a reliability test system which can effectively test the quality of the developed embedded software to further increase its competiveness.

• Earthquakes and Structures
• /
• v.1 no.4
• /
• pp.371-390
• /
• 2010

Historical buildings in seismically active regions are severely damaged by earthquakes, since they certainly were not designed by the original builders to withstand seismic effects. In particular the reports after major ground motions indicate that earthquake-induced pounding between buildings may lead to substantial damage or even collapse of colliding structures. The research on structural pounding during earthquakes has been recently much advanced, although most of the studies are conducted on simplified single degree of freedom systems. In this paper a detailed pounding-involved response analysis of three adjacent structures is performed, concerning the main bodies of the "Quinto Orazio Flacco" school. The construction includes a main masonry building, with an M-shaped plan, and a reinforced concrete building, separated from the masonry one and realized along its free perimeter. By the analysis of the capacity curves obtained by suitable pushover procedures performed separately for each building, it emerges that masonry and reinforced concrete buildings are vulnerable to earthquake-induced structural pounding in the longitudinal direction. In particular, due to the geometric configuration of the school, a special case of impact between the reinforced concrete structure and two parts of the masonry building occurs. In order to evaluate the pounding-involved response of three adjacent structures, in this paper a numerical procedure is proposed, programmed using MATLAB software. Both a non-linear viscoelastic model to simulate impact and an elastic-perfectly plastic approximation of the storey shear force-drift relation are assumed, differently from many commercial softwares which admit just one non-linearity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.615-632
• /
• 2008

The bridge health monitoring has become an important research topic in conjunction with damage assessment and safety evaluation of structures owing to the improvement of structural modeling techniques incorporating response measurements and the advancements in signal analysis and information processing capabilities. The bridge monitoring systems are generally composed of hardwares such as sensors, data acquisition equipment, data transmission systems, etc, and softwares such as signal processing, damage assessment, display and management, etc. In this paper, the research and development(R&D) activities on the information processing for structural health monitoring of bridges are reviewed. After a brief introduction to the process of bridge health monitoring, various information processing techniques including various signal processing and damage detection algorithms are introduced in detail. Several challenges addressing critical issues in the current bridge health monitoring system and future R&D activities are discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.3
• /
• pp.65-75
• /
• 2008

Grid Computing has enabled enormous amount of computational jobs by connecting distributed computing resources. This technology has developed and widely used in various fields. Previous researches usually focused on how to efficiently manage and use the grid resources. However, there was not enough tries to understand and manage information of application softwares in a well-defined structure. Therefore users in application domain need to how about grid deeply to identify and describe the resource requirements matching for each jobs. We introduce a semantic grid management system based on application ontology to overcome this problem. We design and implement the ontology to store various information of the applications. With the ontology, this system can infer the resource requirements from input parameters and input data of the application software and automatically assign appropriate resources by matching the requirement. Also it can transform the information to other forms which grid middlewares can handle. We apply the system to construct an analysis environment of bioinformatics and compare it with other grid systems to explain usefulness of the system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.186-193
• /
• 2018

Modern manufacturing industries is to produce both precise and robust mechanical parts without failure while they are in service. In order to prevent a part failure for its lifetime, a mechanical design for a part should be examined on a basis of mechanical simulation. A nozzle plate, being a key part in steam engines, changes flow directions of steam in a turbine used in power plant. This paper is to the design and test for part safety and durability. Currently, nozzle plates are fabricated by welding nozzles to their plates. Welding causes some defects on the used materials while they are being manufactured. Another major defect is un-even pitches between welded nozzles. Welding causes phase changes because of high melting temperature of metal. This leads to decay on the welding spots, which weakens their structural strength and then, may lead to early damages on mechanical structures. This research proposes assembly-typed nozzle plate without welding. From the beginning, nozzle and plate are designed for insertion-typed assembly. Nozzle head and foot are designed in accordance with the grooves on outer ring and inner ring of a plate to make mating surfaces. Then the nozzle plate should be proved for structural and fatigue safety before they are put in manufacturing. This research adopts commercial softwares for modeling and mechanical simulation. The test result shows that the design with smaller mating area and deeper insertion produces higher safety in terms of structure and durability. From the conclusion, this paper proposes the assembly-typed nozzle plate to replace the welding typed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.78-85
• /
• 2011

In vehicle ad-hoc network (VANET) environments, traffic related information such as accident information, emergency information and real time traffic condition have to be delivered to on-board-unit (OBU) or/and road-side-equipment (RSE) for preventing traffic accidents in advance. In this paper, we introduce a Multi-Channel MAC (MCM) since the existing single channel operation may cause packet transmission delay and unexpected communication failure. To offer a seamless safety message transmission during the various services, it is necessary to manage the MAC scheduler in wireless access in vehicular environments (WAVE) systems. The MCM consists of MAC softwares and MAC hardwares where the former and the later ones are implemented with real time operation system based C language and FPGA module with VHDL language, respectively. The performance and QoS are verified by practical measurements and compared with the scheme using single channel operation.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.78-82
• /
• 2014

Power Transformers with more than one secondary winding are not uncommon in industrial applications. But new classes of applications where very large number of independent secondaries are used are becoming popular in controlled converters for medium and high voltage applications. Cascade H-bridge medium voltage drives and Pulse Step Modulation (PSM) based high voltage power supplies are such applications. Regulated high voltage power supplies (Fig. 1) with 35-100 kV, 5-10 MW output range with very fast dynamics (${\mu}S$ order) uses such transformers. Such power supplies are widely used in fusion research. Here series connection of isolated voltage sources with conventional switching semiconductor devices is achieved by large number of separate transformers or by single unit of multi-secondary transformer. Naturally, a transformer having numbers of secondary windings (~40) on single core is the preferred solution due to space and cost considerations. For design and simulation analysis of such a power supply, the model of a multi-secondary transformer poses special problem to any circuit analysis software as many simulation softwares provide transformer models with limited number (3-6) of secondary windings. Multi-Secondary transformer models with 3 different schemes are available. A comparison of test results from a practical Multi-secondary transformer with a simulation model using magnetic component is found to describe the behavior closer to observed test results. Earlier models assumed magnetising inductance in a linear loss less core model although in actual it is saturable core made-up of CRGO steel laminations. This article discusses a more detailed representation of flux coupled magnetic model with saturable core properties to simulate actual transformers very close to its observed parameters in test and actual usage.

• Journal of the Korean earth science society
• /
• v.38 no.1
• /
• pp.80-90
• /
• 2017

To build tetrahedra mesh for FEM numerical analysis, Boundary Representation (B-Rep) model is required, which provides the efficient volume description of an object. In engineering, the parametric solid modeling method is used for building B-Rep model. However, a geological modeling generally adopts discrete modeling based on the triangulated surface, called a Sealed Geological Model, which defines geological domain by using geological interfaces such as horizons, faults, intrusives and modeling boundaries. Discrete B-Rep model is incompatible with mesh generation softwares in engineering because of discrepancies between discrete and parametric technique. In this research we have developed a converting program from Sealed Geological Model to Gmsh and COMSOL software. The developed program can convert complex geological model built by geomodeling software to user-friendly FEM software and it can be applied to geoscience simulation such as geothermal, mechanical rock simulation etc.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.5
• /
• pp.411-416
• /
• 2002

Recently, the trial and success of malicious cyber attacks has been increased rapidly with spreading of Internet and the activation of a internet shopping mall and the supply of an online internet, so it is expected to make a problem more and more. Currently, the general security system based on Internet couldn't cope with the attack properly, if ever, other regular systems have depended on common softwares to cope with the attack. In this paper, we propose the positive selection mechanism and negative selection mechanism of T-cell, which is the biological distributed autonomous system, to develop the self/non-self recognition algorithm, the anomalous behavior detection algorithm, and AIS (Artificial Immune System) that is easy to be concrete on the artificial system. The proposed algorithm can cope with new intrusion as well as existing one to intrusion detection system in the network environment.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.75.4-76
• /
• 2016

DEEP-South (Deep Ecliptic patrol of the Southern sky) is one of the secondary science projects of KMTNet (Korea Microlensing Telescope Network). The objective of this project is twofold, the physical characterization and the discovery of small Solar System bodies, focused on NEOs (Near Earth objects). In order to achieve the goals, we are implementing a software package to detect and report moving objects in the $18k{\times}18k$ mosaic CCD images of KMTNet. In this paper, we present preliminary results of the moving object detection experiments using the prototype MODP (Moving Object Detection Program). We utilize multiple images that are being taken at three KMTNet sites, towards the same target fields (TFs) obtained at different epochs. This prototype package employs existing softwares such as SExtractor (Source-Extracto) and SCAMP (Software for Calibrating Astrometry and Photometry); SExtractor generates catalogs, while SCAMP conducts precision astrometric calibration, then MODP determines if a point source is moving. We evaluated the astrometric accuracy and efficiency of the current version of MODP. The plan for upgrading MODP will also be mentioned.