• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.99-108
• /
• 2012

The purpose of this study is to demonstrate the improvement of the education process in architectural engineering through the analysis of the advantages of the BIM tool. As public institutions and owners have been introduced to Building Information Modeling (BIM) tools, BIM has become an important factor in the design process in undergraduate university programs. First, BIM-related issues, domestic and overseas, was analyzed. Second, a case study of BIM education was analyzed at K University under the ABEEK process. Students participated a survey about the understanding of BIM and the use of BIM tools. As a result of the analysis, six advantages of the use of BIM tools were found. As a result of this research, following five issues are found about BIM education through advantage of using BIM tools. The result of this research was verified by conducting a survey on the usage of BIM softwares. The limitation of this study was to analyze the case study of only limited numbers of participants at the university.

• Convergence Security Journal
• /
• v.4 no.2
• /
• pp.43-51
• /
• 2004

Operating systems and application programs have security vulnerabilities derived from the software development process. Recently, incident cases related with the abuses of these vulnerabilities are increasing and the damages caused by them are becoming very important security issues all over the nations. Patch management is one of the most important processes to fix vulnerabilities of softwares and to ensure a security of systems. Since an institute or a company has distributed hierarchical and heterogeneous systems, it is not easy to update patches promptly. In this paper, we propose patch management framework to safely distribute and install the patches on Windows, Linux, and Solaris client systems. Besides, we considered extensibility and hierarchical structure for our patch management framework to support large scaled network environment.

• Journal of Biosystems Engineering
• /
• v.29 no.5 s.106
• /
• pp.407-418
• /
• 2004

There are several different types of continuously variable transmission(CVT) such as toroidal drive, belt drive, hydrostatic drive, hydro-mechanical drive. The toroidal CVT is an alternative to the manual transmission, HST, power-shift gear trans-missions or other CVTs. The driver of the CVT tractor doesn't have to operate a shia lever since the CVT controller automatically controls the speed of tractor. Thus, it is much easier to operate the CVT tractor. The fuel efficiency of CVT tractor can be increased since the controller responds quickly to the change in external load on the wheel during field operation. This study was conducted to develop the hardwares and softwares for the toroidal CVT controller which control the variator and the range clutches. The hardware consisted of a measurement system, hydraulic system and computer. And the PID controller was developed using the simulation model of the CVT control system. Through the simulation, the control coefficients for the PID controller were selected. Finally, the performance of the CVT control system was evaluated by step response test and torque response test. The settling time of the CVT control system appeared to be fast enough for field operations.

• Journal of Biosystems Engineering
• /
• v.29 no.5 s.106
• /
• pp.395-406
• /
• 2004

Most of tractors in the world have manual gear transmission, and some of small tractors have hydrostatic trans-mission(HST). Since the HST is expensive and has low power efficiency, it is being used for only small garden tractors. The continuously variable transmission(CVT) is an alternative to the HST or power-shift gear transmissions. The driver of the CVT tractor doesn't have to operate a shift lever since the CVT controller automatically controls the speed of tractor. Thus, it is much easier to operate the CVT tractor. For the easy and stable control of the CVT tractor, an appropriate control algorithm should be developed and the dynamic modeling should be carried out before making the prototype of CVT controller. This study was conducted to develop a simulation model of the CVT control system needed to develop a PID control algorithm. The simulation model consisted of variator dynamics, hydraulic system and control computer. And the simulation model was verified by experiment. The results obtained in this study can be utilized in the design of CVT tractors for practical use, but a lot of field tests and improvement of softwares would be necessary.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.165-168
• /
• 2008

A numerical analysis was conducted to predict the heat transfer characteristics of a solar receiver which is subject to very high heat fluxes and temperatures for solar thermal applications. The concentration ratio of the solar receiver ranges 1000 and the concentrated heat is required to be transported to a certain distance for specific applications. This study deals with a solar receiver according to internal geometry variation incorporating high-temperature heat pipe. The isothermal characteristics in the receiver section is of major concern. The diameter of the solar thermal receiver was 120 mm and the length was 400 mm and the angle of receiver end wall set $90^{\circ},\;60^{\circ},\;45^{\circ},\;30^{\circ}$. And the diameter of the heat pipe was 12.7 mm, 48 axial channels of the same dimensions were attached to the outer wall of the receiver with even spacing in the circumferential direction. The channels are changed to high-temperature sodium heat pipes. Commercial softwares were employed to deal with the radiative heat transfer inside the receiver cavity and the convection heat transfer along the channels. The numerical results are compared and analyzed from the view point of high-temperature solar receiver.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.391-397
• /
• 2005

Power Flow Analysis(PFA) is used as the promising tools for the vibration and noise predictions of complex structures in medium-to-high frequency ranges. When the noise and vibration of a complex structure are analyzed, Power Flow finite Element Method combining PFA with FEM is efficient in vibration analysis, and Power Flow Boundary element Method combining PFA with BEM is usful in noise analysis. PFFEM software, PFADS has been developed for the vibration analysis of coupled system structures. Also, NASPFA, the noise analysis software based on PFBEM, has been developed. Through the several upgrades, the current version PFADS R3 and NASPFA R2 are used for the vibration and noise analysis of system structures in medium-to-high frequency ranges. In this paper, the structure and function of each software are explained, and the vibration and noise levels of vehicle structures predicted by each software are shown.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1745-1748
• /
• 2005

According to the demand of the high productivity, the interest of manufacturing skills is growing in industrial society. Especially the high speed spindle in machining center becomes important these days. The exchange time of the tool in machining center usually calls T-T(tool to tool) time. Detailly explaning, It is influenced by the unclamping time. Affecting factors of the unclamping time are various(the hydraulic system, drawbar mass, a flow meter, disc spring, a piston diameter, pipe diameters, and so on). In this study, we could find factors that decrease the unclamping time and verify it for softwares.(AMESim $4.0^{(R)}$ & visual Nastran $4D^{(R)}$)

• Archives of design research
• /
• v.16 no.4
• /
• pp.25-36
• /
• 2003

The navigation in 3D virtual space is a procedure which must be carefully established in advance with understanding of a complicate perception process. Although current various desktop softwares are suppling developers with easier production circumstances in accordance with popularization era of interactive 3D media it is true that previous systematic conceptual study has been performed exclusively at specific institutions. Therefore, based upon the examples of virtual reality research reported by universities and companies core concepts giving the background for navigation realization and direct/indirect factors supporting substantial realization were analyzed and discussed in this paper.

• Journal of the Korean Society of Costume
• /
• v.61 no.5
• /
• pp.48-63
• /
• 2011

Digital makeup(DM), depending upon computer graphic softwares, is applied to various fields, e.g. character works in movie and game industries and visual printouts in printing works. Focused on makeup field, DM is extremely conducive to developing, scientizing and informationalizing makeup patterns. Despite of unlimited potential of DM of which market size has been growing day by day, its practical use by domestic makeup experts and educators is much less active than expected as far, due to the lack of knowledge accumulation. The purpose of this study is to suggest some theoretical frameworks to generalize DM techniques and analyze two cases using the frames therefore support academicians' recent efforts to theorize DM techniques. The study 1) defines and categorizes the concepts of DM and DFX(digital special effect); 2) reviews the literature relevant to DM and generalizes the types and methods of DM techniques; 3) applies general frames to analyzing two movie cases, famous for their DM effects; 4) then suggests, based upon analytical results, some efficient ways for makeup experts to use DM techniques in practice. This study contributes to providing the theoretical grounds to conceptualize DM thus broadening makeup artists' interests in DM and awakening the scholarly concerns in cultural technology including DM.

• Journal of Biosystems Engineering
• /
• v.24 no.4
• /
• pp.301-308
• /
• 1999

Path planning for field operation of agricultural machinery is an indispensible part for precision farming or autonomous field operation. In this study, two algorithms (I, II) of generating a time-based shortest operation path were suggested to plan an optimal operation of an agricultural tractor-implement in a rectangular shaped field. The algorithms were based on modification of a minimum spanning tree algorithm, and applied for tractor-implement operations. the generated path was consisted of round operation and returning operation sections. The number of round operation was determined from the condition that a tractor can turn smoothly at headlands. The performance of the algorithms was evaluated by the calculation number for path generation and the total path length generated. Their stability was affected by the number of returning operation, but the algorithm II was considered to be more stable. In addition, the performances of the developed algorithms were compared with those of the conventional field operations at selected field sizes and shapes. The results showed that the algorithms could reduce field operation time greatly. For a 100m$\times$40m field, the reduced path length was 78m. The study also included an user interface program for implementing the algorithms and generating GPS coordinates that could be used in GIS softwares for precision farming.