• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.543-545
• /
• 2008

The Inner Arch developed several softwares: $\circ$ One dedicated to solid propulsion project : APSOL $\circ$ One dedicated to liquid propulsion projects ELIS A third one, PERFOL, is used to optimize the trajectory and the propulsion parameters The paper will describe the main software used for this study and illustrate the interest of these tools to make the first design of a new version of a launch vehicle with optimisation both of intrinsic propulsion parameters and of the trajectory.

• 한국산업보건학회지
• /
• 제18권3호
• /
• pp.204-215
• /
• 2008

Many researches for service-life of chemical cartridges of respirators have been performed in many countries. On the result of these researches a few softwares programs were eventually developed to be used. In spite of that, it is difficult to apply these researches and softwares practically in the work spot because of too many factors that influence on service-life of chemical cartridges. This study was the first of two conducted for the purpose of developing program for estimating exchange period or service-life of chemical cartridges available feasibly in the workplaces. Collecting plan of cartridges discarded after use is in principle that three cartridges from three workers at a time, three steps of 1/2 exchange time due to smelling, just routine exchange time and 1.2 to 1.3 expanded time of routine exchange, total nine cartridges are collected in the same job site. 33 cartridges for organic vapor were collected in paint spray process of ship yard and paint factory, and 6 cartridges for acid were collected in plating process. These cartridges were analysed the remaining breakthrough time in 3M Innovation Center. Challenge vapor and breakthrough concentration were complied with Korean regulation for chemical cartridge respirators. Estimated breakthrough time was determined from previously used time plus breakthrough time for the remaining. Exchange period of cartridge would be the shortest time among three estimated breakthrough times. On the result breakthrough time for organic vapor was found to be relatively easily estimated, but that for acid aerosol or vapor was difficult to be confident. Even though this method was difficult to be precisely predicted exchange period of cartridge, it could be an alternative program practically available in the job site.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.797-803
• /
• 2009

The accurate prediction of dynamic characteristics of high speed rotors, such as gas turbines, is important to avoid the possibility of operating the machinery near the critical speeds or unstable speed regions. However, the dynamic analysis methods and softwares for gas turbines have been developed in the process of producing many gas turbines by manufacturers and most of them have seldom been disclosed to the public. Recently, commercial FEM softwares, such as SAMCEF, ANSYS and NASTRAN, started supporting some rotordynamics analysis modules based on 3-D finite elements. In this paper, the dynamic analysis method using commercial S/W, especially ANSYS, is attempted for the small-size gas turbine engine rotor, and the analysis capability and limitations of its rotordyamics module are evaluated for further improvement of the module. As the preliminary procedure, the rotordyamic analysis capability of ANSYS was tested and evaluated with the reference models of the well-known dynamics. The limitations in application of the rotordynamics module were then identified. Under the current capability and limitations of ANSYS, it is shown that Lee diagram, a new frequency-speed diagram enhanced with the concept of $H{\infty}$ in rotating machinery, can be indirectly obtained from FRFs computed from harmonic response analysis of ANSYS. Finally, it is demonstrated based on the modeling and analysis method developed in the process of the S/W verification that the conventional Campbell diagram, Lee diagram, mode shapes and critical speeds of the small-size gas turbine engine rotor can be computed using the ANSYS rotordynamics module.

• 한국항행학회논문지
• /
• 제11권3호
• /
• pp.259-265
• /
• 2007

유비쿼터스 컴퓨팅을 구현하기 위한 임베디드 시스템적 요소, 즉 각종 전자기기, 가전제품, 제어장치 들은 단순히 회로로만 구성되어 있는 것이 아니라 특정한 기능을 수행하도록 프로그램이 내장되어 있는데 이러한 시스템 제어역할을 수행하는 다양한 프로그램을 임베디드 소프트웨어라고 정의할 수 있다. 임베디드 소프트웨어는 시스템의 기능을 제어하는 핵심 요소이므로 내용이나 제어 구조가 공개되는 경우에는 심각한 영향을 받을 수 있다. 임베디드 소프트웨어의 보안은 크게 두 부분으로 나뉘어 고려될 수 있다. 첫 번째는 외부의 위협원이 내부로 침투하여 관련 정보를 유출하는 것이고, 두 번째는 내부 혹은 외부의 위협원이 임베디드 소프트웨어에 악성 코드를 삽입하는 등 불법적인 행동을 하는 것이다. 본 논문에서는 첫 번째 관점에서, 임베디드 소프트웨어를 개발하고 있는 개발 현장에 대한 보안 점검 요소들을 도출하고 제안하였다. 개발 현장에 대한 보안 점검을 통해 외부 위협원의 접근을 원천적으로 차단하는 동시에, 임베디드 소프트웨어의 비인가된 변형을 간접적으로 예방할 수 있을 것으로 기대된다.

• 디지털융복합연구
• /
• 제11권2호
• /
• pp.323-330
• /
• 2013

개방형 소프트웨어의 사용은 하루가 다르게 증가하고 있는 추세이다. 이렇게 개방형 소프트웨어의 사용이 증가함에도 불구하고 개방형 소프트웨어의 품질에 관한 문제의 중요성은 충분히 고려되지 못하고 있다. 그리고 기존 개방형 소프트웨어의 평가모델로 사용되고 있는 기존 평가모델을 살펴보면 정량화 수준이 미흡하고 평가자의 주관이 개입될 수 있는 소지가 있고 명확한 평가방법이 공개되지 않아 실질적으로 적용하기에 많은 문제점이 있다. 따라서 본 논문에서는 평가자에 의해 좌우되지 않는 일관성 있는 정량화된 기준과 평가정보 획득의 자동화를 고려한 신속한 평가 가능성 제고 할 수 있는 평가기준을 구축하였다. 구축된 품질평가 모델은 개방형 소프트웨어의 품질을 평가하고 향상시키는데 중요한 역할을 하게 된다.

• 한국멀티미디어학회논문지
• /
• 제15권2호
• /
• pp.266-272
• /
• 2012

해외 시장을 겨냥한 소프트웨어의 상품화를 위해서는 여러 나라의 언어를 지원하는 다국어 지원 기능이 필요하다. 3-tier 구조는 2-tier 구조의 문제점을 해결하기 위해 애플리케이션을 분리하여 응용 계층을 두고 프리젠테이션 로직과 데이터베이스를 미들웨어로 연결하는 형태이다. 3-tier 구조의 장점은 애플리케이션의 부하 분산으로 성능이 향상되며 확장이 쉽고, 유지보수와 재사용이 용이하다는 점이다. 본 논문에서는 3-tier 구조의 기업용 소프트웨어를 대상으로 소프트웨어 개발과 유지보수, 지원 언어의 추가가 용이한 공통 리소스 활용 방식을 제안하고 빌링 솔루션의 다국어 버전 개발에 적용하여 유용성을 확인한다. 제안하는 방식은 기능 모듈마다 언어별 리소스 파일을 별도로 유지하는 닷넷의 기존 방식을 개선하여 언어별로 하나만 유지하고 다국어 지원 클래스 라이브러리 형태로 제공하여 메모리와 디스크의 공간 낭비를 줄인다. 또한 다국어 지원 클래스 라이브러리를 응용 계층에 배치하여 소프트웨어 개발과 유지보수, 지원 언어 추가가 용이하다. 한편 리소스 파일에 대한 부적절한 변경을 막기 위해 다국어 지원 클래스 라이브러리는 dll 파일로 제공한다.

• 한국소음진동공학회논문집
• /
• 제20권1호
• /
• pp.36-44
• /
• 2010

The accurate prediction of dynamic characteristics of high speed rotors, such as gas turbines, is important to avoid the possibility of operating the machinery near the critical speeds or unstable speed regions. However, the dynamic analysis methods and softwares for gas turbines have been developed in the process of producing many gas turbines by manufacturers and most of them have seldom been disclosed to the public. Recently, commercial FEM softwares, such as SAMCEF, ANSYS and NASTRAN, started supporting some rotordynamics analysis modules based on 3-D finite elements. In this paper, the dynamic analysis method using commercial S/W, especially ANSYS, is attempted for the small-size gas turbine engine rotor, and the analysis capability and limitations of its rotordyamics module are evaluated for further improvement of the module. As the preliminary procedure, the rotordyamic analysis capability of ANSYS was tested and evaluated with the reference models of the well-known dynamics. The limitations in application of the rotordynamics module were then identified. Under the current capability and limitations of ANSYS, it is shown that Lee diagram, a new frequency-speed diagram enhanced with the concept of $H{\infty}$ in rotating machinery, can be indirectly obtained from FRFs computed from harmonic response analysis of ANSYS. Finally, it is demonstrated based on the modeling and analysis method developed in the process of the S/W verification that the conventional Campbell diagram, Lee diagram, mode shapes and critical speeds of the small-size gas turbine engine rotor can be computed using the ANSYS rotordynamics module.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제9권4호
• /
• pp.470-485
• /
• 2003

멀티미디어 데이타중에서 오디오데이타를 이용한 상용화된 오디오 스테가노그라피(audio steganography) 소프트웨어들은 시각적인 측면에서 비밀 메시지가 은닉되어 있다는 것을 쉽게 인지할 수 있다는 것과 숨길 정보의 크기에 제한이 있다는 문제점을 가지고 있다. 이러한 문제점을 해결하기 위해 동적으로 메시지를 은닉하는 방법을 제안하였다. 또한 비밀 메시지의 보안수준을 향상시키기 위해 파일 암호화 알고리즘도 적용하였다. 본 논문에서는 제안한 오디오 스테가노그라피를 수행해주는 StegoWaveK시스템을 상용화된 오디오 스테가노그라피 시스템의 5가지 측면으로 비교 분석하였으며, 성능면에서 우수함을 보였다. StegoWaveK는 상용화된 시스템에 비해 시각적 공격 측면이나 은닉할 메시지 크기 측면에서는 좋으나 인터페이스 측면에서는 사용자 위주의 편리성을 제공할 수 있도록 보완되어야 한다. 그리고 StegoWavek와 상용화된 시스템이 견고성이 약하다는 단점을 보완해야 하며, 다양한 멀티미디어 데이타를 이용한 스테가노그라피로의 추후연구가 필요하다.

• 한국의료질향상학회지
• /
• 제24권1호
• /
• pp.9-22
• /
• 2018

Purpose: The purpose of this study is to develop the Korean root cause analysis (RCA) software that can be used to systematically investigate underlying causes for preventing or reducing recurrence of patient safety incidents. Methods: We reviewed the existing guidelines and literatures on the RCA in order to figure out the RCA process. Also we examined the existing RCA softwares for investigating patient safety incidents to design the contents and interface of the RCA software. Based on the results of reviewing literatures and softwares, we developed a draft version of the Korean RCA software that can be easily used in Korean hospital settings by RCA teams. Results: The Korean RCA software consisted of several modules, which are modules for identifying patient safety incidents, organizing RCA team, collecting and analysing data, determining contributory factors and root causes, developing the action plans, and guiding evaluation. Conclusion: The Korean RCA software included optimized RCA process and structured logic for cause analysis. Thus even beginners in RCA are expected to easily use this software for investigating patient safety incidents. As software has been developed with the public financial support, it will be distributed free of charge. We hope that it will contribute to facilitating patient safety improvement activities in Korea.

• 농촌계획
• /
• 제17권1호
• /
• pp.89-98
• /
• 2011

Recently, the food industry has evolved into a new and innovative trend according to its globalization and change of food consumption patterns. However, it is hard for the traditional food industry in Korea to meet the changing consumers' needs because of its poorer quality control and lower industrialization technology than other advanced industries. Also the knowledges acquired through a lot of time and efforts would be lost after the human resources with tacit knowledges leave by their too much aging. Especially, the 21st century would be called as knowledge based society which means that knowledge be the important contributing factor in the economic growth. In this regard, this study aimed at proposing the knowledge based system for systematically managing or preserving knowledges of Mosisongpyun industry in Yeonggwang County to seek for the sustainable development of the traditional food industry in Korea. The knowledge based system of Mosisongpyun industry in Yeonggwang County is finally proposed as follows; First, hardware is composed with the necessary unit facilities such as interpretive center, learning and experience room, library, etc. And the integrating facilities such as Mosisongpyun theme park, traditional village, and knowledge industrialization support center are proposed. Second, software is composed with the necessary unit softwares such as the preservation manual of traditional knowledge and skill, web-site administrator, development of graded textbooks, development database software, etc. And the integrating softwares such as development of innovation and management ability in Mosisongpyun industry are proposed. Third, humanware is composed with the necessary unit programs such as exhibition, own training program, incubator support system, etc. And the integrating programs such as the farm association corporation, the testing and research institute, the institution of learning and training are proposed.