• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.886-890
• /
• 2014

The properties of magnetic material of Nd-Fe-B are highly affected by various factors such as particle size, magnetic anisotropy, phase purity and crystal structure. Incorporation of excess neodymium was carried out in various percentages so that it will adjust the proportion of neodymium in the host crystal after reduction treatment and finally help to improve magnetic property of a material. The interdiffusion of Nd-Fe and boron was studied for various compositions and their effect on magnetic property was understood with theoretical concepts. The factors such as amount of hard and soft phase in the reduction treated product is also responsible for the possible exchange coupling between hard and soft phase magnets for better magnetic properties.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 동계학술연구발표회 및 2차 아시안포럼
• /
• pp.74-75
• /
• 2005

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.266-269
• /
• 2009

Iron-based soft magnetic materials are widely used as cores, such as transformer transformers, motors, and generators. Reducing losses generated from soft magnetic materials of these applications results in improving energy conversion efficiency. Recently, the new P/M soft magnetic material realized an energy loss of 68 W/kg with a drive magnetic flux of 1 T, at a frequency of 1 kHz, rivaling general-purpose electromagnetic steel sheet in the low frequency range of 200 Hz to 1 kHz. In this research, the effect of rolling parameters on soft magnetic properties of Fe-based powder cores was investigated. The Fe-based soft magnetic plates were produced by the hot powder rolling process after both pure Fe and Fe-4%Si powders were canned, evacuated, and sealed in Cu can. The soft magnetic properties such as energy loss and coercive power were measured by B-H curve analyzer. The soft magnetic properties of rolled sheets were measured under conditions of a magnetic flux density of 1 T at a frequency of 200 kHz. It was found that rolling reduction ratio is the most effective parameter on reducing both energy loss and coercivity because of increasing aspect ratio with reduction ratio. By increasing aspect ratio from 1 to 9 through hot rolling of pure Fe powder, a significant loss reduction of one-third that of SPS sample was achieved.

• Bulletin of the Korean Chemical Society
• /
• 제23권4호
• /
• pp.613-616
• /
• 2002

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.788-789
• /
• 2006

Microstructure and soft magnetic properties of bulk amorphous and/or nanocrystalline $Fe_{73.5}Cu_1Nb_3Si_{13.5}B_9$ alloys prepared by consolidation at 5.5GPa were investigated. The relative density of the bulk sample 1 (from amorphous powders) was 98.5% and the grain sizes were about 10.6nm. While the relative density and grain sizes of bulk sample 2 (from nanocrystalline powders) are 98% and 20.1nm, respectively. Particularly, the bulk samples exhibited a good combined magnetic property: for Sample1, $M_s=125emu/g$ and $H_c=1.5Oe;$ for Sample2, $M_s=129emu/g$ and $H_c=3.3Oe$. The success of synthesizing the nanocrystalline Fe-based bulk alloys will be encouraging for the future development of bulk nanocrystalline soft magnetic alloys.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 하계학술연구발표회 논문개요집
• /
• pp.138-139
• /
• 2005

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.122-127
• /
• 2017

Fe-6.5 wt.% Si alloys are widely known to have excellent soft magnetic properties such as high magnetic flux density, low coercivity, and low core loss at high frequency. In this work, disc-shaped preforms are prepared by spark plasma sintering at 1223 K after inert gas atomization of Fe-6.5 wt.% Si powders. Fe-6.5 wt.% Si sheets are rolled by a powder hot-rolling process without cracking, and their microstructure and soft magnetic properties are investigated. The microstructure and magnetic properties (saturation magnetization and core loss) of the hot-rolled Fe-6.5 wt.% Si sheets are examined by scanning electron microscopy, electron backscatter diffraction, vibration sample magnetometry, and AC B-H analysis. The Fe-6.5 wt.% Si sheet rolled at a total reduction ratio of 80% exhibits good soft magnetic properties such as a saturation magnetization of 1.74 T and core loss ($W_{5/1000}$) of 30.7 W/kg. This result is caused by an increase in the electrical resistivity resulting from an increased particle boundary density and the oxide layers between the primary particle boundaries.

• 한국자기학회지
• /
• 제19권2호
• /
• pp.52-56
• /
• 2009

[CoFe/Cu/CoFe]/IrMn 다층박막에 대하여 자유층 CoFe 두께에 따른 상호교환결합력, 교환결합세기, 보자력, 자기저항비, 자장감 응도 등의 자기저항 특성을 관찰하였다. IrMn 층을 통해 유도된 강자성체/비자성체/강자성체 구조인 CoFe(t)/Cu($25\;{\AA}$)/CoFe($60\;{\AA}$)/IrMn($80\;{\AA}$) 다층박막은 자유층 CoFe 두께 $30\;{\AA}$일 때 작은 보자력과 높은 자장감응도를 유지하는 연자성 특성을 보였다. 반면에 자유층 CoFe 두께 $90\;{\AA}$일 때 큰 보자력과 낮은 자장감응도를 보였다. 양호한 연자성 특성을 갖은 $2{\times}8{\mu}m^2$ 크기의 CoFe($30\;{\AA}$)/Cu($25\;{\AA}$)/CoFe($60\;{\AA}$)]/IrMn($80\;{\AA}$) 스핀밸브 소자를 제작하였다. 길이방향의 센싱전류와 폭방향의 고정층의 용이축 방향을 택하여 2 단자법으로 측정한 소자의 연자성 자기저항 특성인 자기저항비와 자장감응도는 각각 3.0%와 0.3%/Oe 이었다.

• Journal of Magnetics
• /
• 제14권3호
• /
• pp.104-107
• /
• 2009

The effects of the magnetic property variation on current-induced magnetization switching in magnetic tunnel junction with perpendicular magnetic anistoropy (PMA) and the soft magnetic polarization-enhancement layers (PELs) inserted between the layers with PMA and the MgO layer was studied. A micromatnetic model was used to estimate the switching time of the free layer by different applied current densities, with changing saturation magnetization ($M_s$) of the PELs, interlayer exchange coupling between PMA layers and PELs. The switching time could be significantly reduced at low current densities, by increasing $M_s$ of PELs and decreasing interlayer exchange coupling.

• 한국자기학회지
• /
• 제19권4호
• /
• pp.142-146
• /
• 2009

이온빔 증착법으로 제작한 코닝유리(Corning glass)/Ta(5 nm)/(Permalloy, Conetic)/Ta(5 nm) 박막에 대한 연자성의 특성에 대해 연구하였다. 퍼멀로이(Permalloy; NiFe)층과 코네틱(Conetic; NiFeCuMo)층을 증착하여 인가 자기장 방향에 용이축과 곤란축의 자기저항곡선으로부터 얻은 보자력과 포화자기장에 대해 각각 비교하였다. 두께가 10${\sim}$15 nm인 코네틱 박막의 표면저항값은 퍼멀로이 박막보다 2배 정도 높았으나 보자력과 포화자기장은 1/3배 정도 낮았으며, 자화율은 2${\sim}$3배 정도 높은 초연자성의 특성을 가졌다. 퍼멀로이 박막보다 연자성의 특성이 높은 코네틱 박막을 이용한 스핀밸브나 터널접합의 소자를 개발할 수 있는 가능성을 확인하였다.