• Journal of Magnetics
• /
• 제20권3호
• /
• pp.229-240
• /
• 2015

In this study, nanocrystalline ferrite powders with the composition $Ni_{0.5}Zn_{0.5}Fe_2O_4$ were prepared by the autocombustion method. The obtained powders were sintered at $800^{\circ}C$, $900^{\circ}C$ and $1,000^{\circ}C$ for 4 h in air atmosphere. The as-prepared and the sintered powders were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and magnetization studies. An increase in the crystallite size and a slight decrease in the lattice constant with sintering temperature were observed, whereas microstrain was observed to be negative for all the samples. Two significant absorption bands in the wave number range of the $400cm^{-1}$ to $600cm^{-1}$ have been observed in the FT-IR spectra for all samples which is the distinctive feature of the spinel ferrites. The force constants were found to vary with sintering temperature, suggesting a cation redistribution and modification in the unit cell of the spinel. The M-H loops indicate smaller coercivity, which is the typical nature of the soft ferrites. The observed variation in the saturation magnetization and coercivity with sintering temperature has been attributed to the role of surface, inhomogeneous cation distribution, and increase in the crystallite size.

• 한국자기학회지
• /
• 제23권3호
• /
• pp.83-88
• /
• 2013

두께 1 ${\mu}m$ 정도의 연자성 Fe-Si-Cr 합금 박편을 편상화 가공을 실시한 그대로 및 500과 $700^{\circ}C$에서 1시간 어닐링한 후 이를 폴리머 중에 분산시켜 준마이크로파 대역의 전자파 노이즈 억제용 복합 시트를 제조하여, 자성 합금의 열처리가 전자파 전송 손실(전력 손실)에 미치는 영향을 조사하였다. 합금 분말을 어닐링하지 않은 것이 어닐링한 분말을 사용한 경우보다 수 GHz의 주파수 대역에서 전력 손실의 크기가 증가하였다. 이 때 복소 투자율의 허수항 크기도 어닐링을 하지 않았을 때 더 큰 값을 나타내었는바 편상화 가공 상태의 자성 분말을 사용한 복합 시트가 우수한 전자파 노이즈 흡수 특성을 가지며, 이에는 그의 높은 복소 투자율의 허수항 크기가 기여하고 있는 것으로 판단되었다. 반면 편상화 시킨 합금 박편을 어닐링 한 경우에는 와전류 효과의 증대에 따라 복소 투자율이 낮아지고 따라서 전력 손실도 저하되는 것으로 생각되었다.

• 대한영상의학회지
• /
• 제83권5호
• /
• pp.1071-1080
• /
• 2022

목적 급성 통풍성 관절염과 패혈성 관절염의 자기공명영상 소견 차이를 알아본다. 대상과 방법 2012년 10월부터 2018년 10월까지 패혈성 혹은 통풍성 관절염으로 확진된 자기공명영상을 촬영한 환자를 대상으로 연구하였다. 패혈성 관절염과 급성 통풍성 관절염의 자기공명영상 소견으로 골수부종, 연부조직 부종, 농양 형성 여부, 활액막 비후 양상(엽상체, 층판, 미만성 선형 모양), 활액막 최대 두께와 관절액 양을 평가하였다. 통풍성 관절염(5명)과 패혈성 관절염(10명)을 윌콕슨 순위합 검정과 피셔 정확 검정으로 비교하였다. 결과 자기공명영상으로 평가된 각 소견은 두 군 사이에 유의한 통계학적 차이는 보이지 않았다. 골수부종은 통풍성 관절염군에서 1건, 패혈성 관절염군에서 7건 관찰되었다. 연부조직 농양은 패혈성 관절염군에서만 관찰되었다. 활액막 비후양상은 통풍성 관절염군은 모두 미만성 선형 모양(100%), 패혈성 관절염군은 엽상체 모양(20%), 층판 모양(50%), 미만성 선형 모양(30%)으로 나타났다. 결론 통풍성 관절염과 패혈성 관절염은 자기공명영상 소견만으로 감별은 어려울 것으로 생각된다. 그러나 층판 모양 활액막 비후나 골수부종, 연부조직 농양의 경우 패혈성 관절염에서 더 흔히 보였다.

• Korean Journal of Radiology
• /
• 제20권4호
• /
• pp.641-648
• /
• 2019

Objective: The purpose of this study was to investigate whether three-dimensional (3D) magnetic resonance imaging could improve diagnostic accuracy for suspected posterior ligamentous complex (PLC) disruption. Materials and Methods: We used 20 freshly harvested goat spine samples with 60 segments and intact surrounding soft tissue. The animals were aged 1-1.5 years and consisted of 8 males and 12 females, which were sexually mature but had not reached adult weights. We created a paraspinal contusion model by percutaneously injecting 10 mL saline into each side of the interspinous ligament (ISL). All segments underwent T2-weighted sagittal and coronal short inversion time inversion recovery (STIR) scans as well as coronal and sagittal 3D proton density-weighted spectrally selective inversion recovery (3D-PDW-SPIR) scans acquired at 1.5T. Following scanning, some ISLs were cut and then the segments were rescanned using the same magnetic resonance (MR) techniques. Two radiologists independently assessed the MR images, and the reliability of ISL tear interpretation was assessed using the kappa coefficient. The chi-square test was used to compare the diagnostic accuracy of images obtained using the different MR techniques. Results: The interobserver reliability for detecting ISL disruption was high for all imaging techniques (0.776-0.949). The sensitivity, specificity, and diagnostic accuracy of the coronal 3D-PDW-SPIR technique for detecting ISL tears were 100, 96.9, and 97.9%, respectively, which were significantly higher than those of the sagittal STIR (p = 0.000), coronal STIR (p = 0.000), and sagittal 3D-PDW-SPIR (p = 0.001) techniques. Conclusion: Compared to other MR methods, coronal 3D-PDW-SPIR provides a more accurate diagnosis of ISL disruption. Adding coronal 3D-PDW-SPIR to a routine MR protocol may help to identify PLC disruptions in cases with nearby contusion.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 제3회 최신 분말제품 응용기술 Workshop
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• 자원리싸이클링
• /
• 제14권3호
• /
• pp.63-67
• /
• 2005

최근 고품위 TV 및 고정세도 디스플레이용으로 화상의 정세도를 향상시키기 위해 수평주파수를 높이려는 경향이 있어, 편향 요크용 페라이트 코아에는 고주파수 영역에 있어서도 코아로스가 낮은 재료가 요구되고 있는 실정이다. Mg-Zn 페라이트에 있어서 화학조성 및 프로세스가 미세구조에 미치는 영향에 착안하여 저온 소결화를 하였다. 저손실인 Mg-Zn계 te에 Cu에 첨가하였다. MgO, ZnO, Fe$_2O_3$, CuO를 선택한 후 조성비의 변화를 두며 CuO를 MgO로 치환하였다. 이 시료를 980$^{\circ}C$~1350$^{\circ}C$까지 3시간 소결하고, 투자율, 전력손실, 수축률, 코아로스를 측정하였다.

• Imaging Science in Dentistry
• /
• 제43권1호
• /
• pp.37-44
• /
• 2013

Purpose: The aim of this study was to analyze three-dimensional images of the arterial supply to the temporo-mandibular joint. Materials and Methods: Ten patients (five men and five women, mean age 36 years) without signs or symptoms of temporomandibular disorders, who underwent contrast-enhanced computed tomographic (CT) scanning with intravenous contrast, were studied. The direct volume rendering technique of CT images was used, and a data set of images to visualize the vasculature of the human temporomandibular joint in three dimensions was created. After elaboration of the data through post-processing, the arterial supply of the temporomandibular joint was studied. Results: The analysis revealed the superficial temporal artery, the anterior tympanic artery, the deep temporal artery, the auricular posterior artery, the transverse facial artery, the middle meningeal artery, and the maxillary artery with their branches as the main arterial sources for the lateral and medial temporomandibular joint. Conclusion: The direct volume rendering technique was found to be successful in the assessment of the arterial supply to the temporomandibular joint. The superficial temporal artery and maxillary artery ran along the lateral and medial sides of the condylar neck, suggesting that these arteries are at increased risk during soft-tissue procedures such as an elective arthroplasty of the temporomandibular joint.

• Clinics in Shoulder and Elbow
• /
• 제12권1호
• /
• pp.94-97
• /
• 2009

목적: 동면종은 혈관분포가 풍부한 갈색지방조직으로 이루어진 매우 희귀한 양성 연부조직 종양이다. 대상 및 방법: 조직학적으로 악성의 성향을 보이지는 않으나, 진단 방법에 있어서 자기 공명 영상이나 조영 증강 컴퓨터 단층 촬영상에서 지방육종 등의 악성 종양과 구별되지 않는 특징을 갖기때문에, 수술적 방법을 통한 조직 생검이 치료 방법이다. 결과: 조직병리학적으로 갈색지방세포로 이루어져 있기 때문에, 백색지방세포 조직과 달리 구성 세포들은 다각형 모습의 다공포성이며, 핵이 중앙부에 위치하고 과립성의 세포질을 갖고 있다. 결론: 본 증례에서는 조직학적으로 확인된 우측 견관절의 동면종에 대해서 보고하고자 한다.

• Investigative Magnetic Resonance Imaging
• /
• 제9권2호
• /
• pp.134-139
• /
• 2005

목적 : 청각의 뇌기능 영상 검사 시 소음 감쇠기의 유용성을 알아보고자 하였다. 대상 및 방법 : 소음 감쇠기는 실리콘 이어폰, 귀마개 그리고 마스크로 구성하였다. 마스크와 귀마개는 방음효과가 크다고 알려져 있는 부드러운 재질의 폴리우레탄 시트와 폴리우레탄 폼을 사용하여 제작하였다. 500 Hz의 순음 자극에 대한 청각의 뇌기능 자기공명영상 실험은 4명의 지원자를 대상으로 다음의 세가지 경우로 구별하여 시행하였다: 첫째, 마스크와 귀마개, 이어폰을 모두 착용한 경우, 둘째, 귀마개와 이어폰만을 착용한 경우 그리고 마지막으로 소음 감쇠기를 착용하지 않은 경우 이다. 데이터 획득을 위하여 고성능 경사자계 시스템이 갖추어진 1.5 T 자기공명영상장치에서 BOLD 자기공명 영상기법을 사용하였다. 영상 데이터는 SPM 99 분석프로그램을 이용하여 분석하여 활성화 지도를 획득하였다. 결과 : 소음감쇠기의 모든 구성요소를 사용한 경우 활성화는 주로 일차 청각중추에서만 집중되어 나타나는 결과를 얻었다. 귀마개와 이어폰만을 착용했을 때는 청각의 뇌 활성화 영역이 일차 청각중추와 이차 청각 영역에 분산되어 나타는 결과를 얻었으며 마지막으로 소음감쇠기를 사용하지 않은 경우 청각영역이 오른쪽의 일부만이 활성화 되었다. 결론 : 마스크, 귀마개, 이어폰으로 구성된 소음 감쇠기는 청각의 뇌기능 영상 검사 시 매우 유용할 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.312-312
• /
• 2012

Magnesium oxide has become focus for research activities due to its use in magnetic tunnel junctions and for understanding of do ferromagnetism. Theoretical investigations on such type of system indicate that the presence of defects greater than a threshold value is responsible for the magnetic behaviour. It has also been shown experimentally that by decreasing the film thickness and size of nanoparticles, enhancement/increase in magnetization can be achieved. Apart from the change in dimension, swift heavy ions (SHI) are well known for creating defects and modifying the properties of the materials. In the present work, we have studied the irradiation induced effects in magnesium oxide thin film deposited on quartz substrate via X-ray absorption spectroscopy (XAS). Magnesium oxide thin films of thickness 50nm were deposited on quartz substrate by using e-beam evaporation method. These films were irradiated by 200 MeV Ag15+ ion beam at fluence of $1{\times}10^{11}$, $5{\times}10^{11}$, $1{\times}10^{12}$, $3{\times}10^{12}$ and $5{\times}10^{12}ions/cm^2$ at Nuclear Science Centre, IUAC, New Delhi (India). The grain size was observed (as studied by AFM) to be decreased from 37 nm (pristine film) to 23 nm ($1{\times}10^{12}ions/cm^2$) and thereafter it increases upto a fluence of $5{\times}10^{12}ions/cm^2$. The electronic structure of the system has been investigated by X-ray absorption spectroscopy (XAS) measurements performed at the high energy spherical grating monochromator 20A1 XAS (HSGM) beamline in the National Synchrotron Radiation Research Center (NSRRC), Taiwan. Oxides of light elements like MgO/ZnO possess many unique physical properties with potentials for novel application in various fields. These irradiated thin films are also studied with different polarization (left and right circularly polarized) of incident x-ray beam at 05B3 EPU- Soft x-ray scattering beamline of NSRRC. The detailed analysis of observed results in the wake of existing theories is discussed.