• 전기화학회지
• /
• 제5권1호
• /
• pp.17-20
• /
• 2002

다양한 조성의 CoFeNi합금이 chloride bath와 sulfate bath에서 전해도금 되어졌고, 합금의 도금 특성과 자기특성이 관찰되어졌다. CoFeNi합금 박막의 전해도금에 있어서 Fe조성의 증가는 chloride bath에서보다 sulfate bath에서 빠르게 증가하였다. 전류효율은 큰 변화가 보이지 않는 chloride bath와 달리 sulfate bath에서는 $750\%$에서 $50\%$로 큰 폭으로 감소하였다. Co, Fe, Ni조성이 $80\%,\;10\%,\;10\%$되는 CoFeNi합금이 이번 실험에서 가장 우수한 연자성 재료로 평가되었으며, 그때의 Coercivity는 3 Oe이고 높은 squareness값을 보였다

• Membrane and Water Treatment
• /
• 제8권3호
• /
• pp.259-277
• /
• 2017

Adsorption is a widely used technique for the removal of dyes from wastewaters by variety of adsorbents. In this work, the main focus is on the potential assessment of anion exchange membrane for the removal of different dyes using batch system and investigation of experimental data by applying various kinetic and thermodynamic models. The removal of anionic dyes i.e., Eosin-B, Eriochrome Black-T and Congo Red by anion exchange membrane BII from aqueous solution was carried out and effect of various parameters such as contact time, membrane dosage, temperature and ionic strength on the percentage removal of anionic dyes was studied. The experimental data was assessed by kinetic models namely pseudo-first-order, pseudo-second-order, Elovich liquid film diffusion, Bangham and the modified Freundlich models equation have been used to analyze the experimental data. These results indicate that the adsorption of these anionic dyes on BII follows pseudo-second-order kinetics with maximum values of regression coefficient (0.992-0.998) for all the systems. The adsorption of dyes was more suitable to be controlled by a liquid film diffusion mechanism. The adsorptive removal of dye Eosin-B and Eriochrome Black-T were decreased with temperature and thermodynamic parameters such as free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$) and entropy (${\Delta}S^o$) for adsorption of dyes on membrane BII were calculated at 298 K, 308 K and 318 K. The values of enthalpy and entropy were negative for EB and EBT representing that the adsorption of these dyes on BII is physiosorptive and exothermic in nature. Whereas the positive values of enthalpy and entropy for CR adsorption on BII, indicating that its adsorption is endothermic and spontaneous in nature. It is evident from this study that anion exchange membrane has shown good potential for the removal of dyes from aqueous solution and it can be used as adsorbent for dues removal on commercial levels.

• Composites Research
• /
• 제29권6호
• /
• pp.401-407
• /
• 2016

이온성 고분자 복합물인 IPMC(Ionic Polymer Metal Composite)는 얇고 유연한 고분자 필름의 양면에 백금소재의 전극층이 도금된 형태로 구성되어 있다. IPMC는 외부 물리적 자극에 대응하여 전기적 에너지를 발생시키는 특성을 가지고 있기 때문에 주변환경에서 발생하는 진동으로부터 에너지를 획득하는데 응용될 수 있어 신재생에너지 획득 소자로 큰 잠재력을 가지고 있다. 그러나 실용적인 에너지 획득을 위해서는 큰 면적의 IPMC 집적 기술이 필요하다. 본 논문에서는 IPMC의 면적 증가에 따른 출력 전압의 특성 변화에 대한 연구를 수행하기 위하여 다른 면적의 IPMC 샘플들이 사용되었다. 또한 IPMC에서 발생하는 전압과 오프셋 현상을 시뮬레이션 할 수 있는 회로 모델을 사용하여 출력 전압의 추정에 사용하였다. 본 논문에서 제안된 회로 모델이 면적 변화에 따른 출력 전압을 비교적 잘 추정함이 검증되었다.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.545-551
• /
• 2012

In semiconductor manufacturing, the circuit integrity of packaged BGA devices is tested by measuring electrical resistance using test sockets. Test sockets have been reported to often fail earlier than the expected life-time due to high contact resistance. This has been attributed to the formation of Sn oxide films on the Au coating layer of the probe pins loaded on the socket. Similar to contact failure, and known as "fretting", this process widely occurs between two conductive surfaces due to the continual rupture and accumulation of oxide films. However, the failure mechanism at the probe pin differs from fretting. In this study, the microstructural processes and formation mechanisms of Sn oxide films developed on the probe pin surface were investigated. Failure analysis was conducted mainly by FIB-FESEM observations, along with EDX, AES, and XRD analyses. Soft and fresh Sn was found to be transferred repeatedly from the solder bump to the Au surface of the probe pins; it was then instantly oxidized to SnO. The $SnO_2$ phase is a more stable natural oxide, but SnO has been proved to grow on Sn thin film at low temperature (< $150^{\circ}C$). Further oxidation to $SnO_2$ is thought to be limited to 30%. The SnO film grew layer by layer up to 571 nm after testing of 50,500 cycles (1 nm/100 cycle). This resulted in the increase of contact resistance and thus of signal delay between the probe pin and the solder bump.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.249-256
• /
• 2022

대퇴의족은 절단하지를 대체하여 보행을 수행하는 기기이며, 불연속적으로 변하는 보행 환경에 대응하기 위해 사용자의 의도 제공을 통한 보행 모드 변경을 요구한다. 외부의 제어 기기 없는 자연스러운 보행 모드 변경을 위한 요구로 절단 부위와 직접 접촉하는 소켓 내부의 생체 역학적 특징을 통해 사용자의 의도를 검출하는 연구가 수행되어 왔다. 하지만 아직까지 절단 부위의 신체 및 소켓 내부 환경에 적합한 센서 시스템의 요구가 남아있다. 따라서 본 연구에서는 절단 부위의 신체 특성에 적합하고 소켓 내부 온습도 조건에 영향을 받지 않으며 다양한 크기의 제작이 쉬운 필름 형태의 센서 시스템을 제안하였다. 제안된 센서는 Velostat 필름으로 제작되었으며 크기에 따라 달라지는 압력 계측 특성이 고려되었다. 실험을 통해 착용자의 의도적인 자세 수행에 의한 소켓 내부 압력 변화를 계측하였으며 보행 모드 변경 의도 검출의 가능성을 확인하였다.

• 농업과학연구
• /
• 제41권4호
• /
• pp.473-480
• /
• 2014

Upon setting up a dedicated plastic greenhouse for tomato cultivation developed by the Rural Development Administration on the Gyehwa reclaimed land, this study was aimed at analyzing the problems can be occurred in the installation of plastic greenhouse on reclaimed lands as well as finding out solutions for improvement. A relatively cheaper wooden pile was used in the installation in order to supplement the soft ground conditions. Based on the results of ground investigation of the installation site, both the allowable bearing capacity and pulling resistance of the wooden pile with a diameter of 150 mm and a length of 10 m were computed and came out to be 30.645 kN. It was determined that the values were enough to withstand the maximum compressive force (17.206 kN) and the pullout force (20.435 kN) that are generally applied to the greenhouse footing. There are three problems aroused in the process of greenhouse installation, and the corresponding countermeasures are as follow. First, due to the slightly bent shape of the wooden pile, there were phenomenon such as deviation, torsion, and fracture when driving the pile. This could be prevented by the use of the backhoe (0.2) rotating tongs, which are holding the pile, to drive the pile while pushing to the direction of the driving and fixing it until 5 m below ground and applying a soft vibrating pressure until the first 2 m. Second, there exists a concrete independent footing between the column of the greenhouse and the wooden pile driven to the underground water level. Since it is difficult to accurately drive the pile on this independent footing, the problem of footing baseplate used to fix the column being off the independent footing was occurred. In order to handle with this matter, the diameter of the independent footing was changed from 200 mm to 300 mm. Last, after films were covered in the condition that the reinforcing frame and bracing are not installed, there was a phenomenon of columns being pushed away by the strong wind to the maximum of $11m{\cdot}s^{-1}$. It is encouraged to avoid constructions in winter, and the film covering jobs always to be done after the frame construction is completely over. The height of the independent footing was measured for 9 months after the completion of the greenhouse installation, and it was found to be within the margin of error meaning that there was no subsidence. The extent to the framework distortion and the value of inclinometers as well showed not much alteration. In other words, the wooden pile was designed to have a sufficient bearing capacity.

• 공업화학
• /
• 제24권3호
• /
• pp.219-226
• /
• 2013

차세대 전자 디스플레이 관련 제품의 휴대편리성, 유연성, 경량화, 대형화 등의 요구조건을 확보할 수 있는 유기반도체 소재기반 소프트 일렉트로닉스에 많은 관심이 모아지고 있다. 소프트 일렉트로닉스의 응용분야로는 전자 신문, 전자 책, 스마트카드, RFID 태그, 태양전지, 휴대용 컴퓨터, 센서, 메모리 등이 있으며, 핵심소자는 유기 전계효과 트랜지스터(organic field-effect transistor, OFET)이다. OFET의 고성능화를 위해서는 유기반도체, 절연체, 전극 구성소재들이 최적화 구조를 형성하도록 적층되어야 한다. 필름형성화 과정에서 대부분의 유기반도체 소재는 결합력이 약한 van der Waals 결합으로 자기조립 결정구조를 형성하므로, 이들의 결정성 필름구조는 주위 환경(공정변수 및 기질특성)에 의해 크게 달라진다. 특히 기질의 표면 에너지(surface energy) 및 표면 거칠기(surface roughness)에 따라 유기반도체 박막 내 결정 구조 및 배향 등은 크게 달라져, OFET의 전기적 특성에 큰 차이를 미친다. 유기친화적 절연층 소재 및 표면개질화는 전하이동에 유리하도록 용액 및 증착공정 유기반도체 박막의 결정구조 및 배향을 유도시켜 OFET의 전기적 성능을 향상시킬 수 있다.

• Journal of Chest Surgery
• /
• 제14권1호
• /
• pp.67-70
• /
• 1981

Aneurysms of the extracranial carotid artery are rare. This is a case report of the rapidly expanding false carotid aneurysm at left common carotid artery, which was repaired surgically with internal shunt This 20 year old male patient had a large pulsatile mass on left lateral aspect of neck at the time of admission. About 1 month before admission, he had received a trauma on left neck by glass piece and noted massive blood loss. And its skin of lesion was sutured simply at local clinic and well healed. 10 days before the admission, he had the sudden onset of the adult thumb sized and pulsatile mass and the mass had been enlarged more and more to the adult first-sized one. The cervical film showed a egg-sized and soft tissue mass. There was systolic bruit on the mass. The diagnosis was confirmed with the angiogram of left carotid artery and this showed the man`s thumb tip-sized extravasation at the point 2 Cm below the bifurcation of Internal and external carotid arteries. The emergency operation was performed by the internal shunt with carotid artery. The aneurysm was enclosed with the adventitia and carotid sheath, and the intima and media were Intact and had the opening of 0.5 cm in diameter. The opening was sutured by the one-hand mattress suture method and firmed with the Aron Alpha-A "Sankyo." The postoperative course was uneventful and the patient was discharged with good general condition.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.247-247
• /
• 2012

Plasmon subwavelength nanostructures enable the structurally modulated color due to the resonance conditions for the specific wavelength range of light with the nanoscale hole arrays on a metal layer. While the unique properties offered from a single layer of metal may open up the potential applications of integrated devices to displays and sensors, fabrication requirements in nanoscale, typically on the order of or smaller than the wavelength of light in a corresponding medium can limit the cost-effective implementation of the plasmonic nanostructures. Simpler nanoscale replication technologies based on the soft lithography or roll-to-roll nanoimprinting can introduce economically feasible manufacturing process for these devices. Such replication requires an optimal design of a master template to produce a stamp that can be applied for a roll-to-roll nanoimprinting. In this paper, a master mold with subwavelength nanostructures is fabricated and optimized using focused ion beam for the applications to nanoimprinting process. Au thin film layer is deposited by sputtering on a glass that serves as a dielectric substrate. Focused ion beam milling (FIB, JEOL JIB-4601F) is used to fabricate surface plasmon subwavelength nanostructures made of periodic hole arrays. The light spectrum of the fabricated nanostructures is characterized by using UV-Vis-NIR spectrophotometer (Agilent, Cary 5000) and the surface morphology is measured by using atomic force microscope (AFM, Park System XE-100) and scanning electron microscope (SEM, JEOL JSM-7100F). Relationship between the parameters of the hole arrays and the corresponding spectral characteristics and their potential applications are also discussed.

• Journal of Chest Surgery
• /
• 제9권2호
• /
• pp.139-142
• /
• 1976

A 33 year old male patient was admitted with 20 years history of recurrent hemoptysis. On clinical examination, mild left chest discomfortness and foul odored sputum with occasional rusty hemoptysis were principal complaints noted. Chest X-ray film revealed moderately advanced active tuberculosis lesion on both upper lung fields, and hen-egg sized mass surrounded with linear crescent of air shadow in a cavity on his left upper lung field. On left thoracotomy, dense pleural adhesions on left apicoposterior segmental surface with multiple lymphnode enlargements were noted, and the soft encapsulated mass of $5{\times}5{\times}8cm$ was localized in the apicoposterior segment of the left upper lobe. Apicoposterior segment with anterior segment of the left upper lobe was resected. Cavity was opened to find a rusty grayish colored, fragile mass, which was confirmed as "fungus ball" of aspergillosis by histological section slide with Gomori staining. The authors report one case of pulmonary aspergilloma superinfected with previous long standing pulmonary tbc.