• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.43-44
• /
• 2007

SMC(Soft Magnetic Composite) 재질은 일반 실리콘 강판에 비해 코어의 3차원 형상을 자유롭게 제작 할 수 있으며, 고속 회전시에 발생하는 철손을 감소시킬 수 있어 모터 코어용으로 많은 제작이 이루어지고 있다. 따라서 본 논문에서는 고속 회전용 청소기용 BLDC 모터의 코어를 SMC 재질로 제작 Back-EMF를 측정하였다. 코어의 형상은 크게 3차원 형상을 고려한 3가지로 타입으로 구분하여 제작하였고, 각 형상별로 모터를 제작하여 특성을 측정하였다. 본 논문에서는 SMC 분말을 이용한 코어 성형시 3차원 형상에 따른 모터의 Back-EMF의 특성을 보여준다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1482-1490
• /
• 2001

디지털 통신 시스템 및 신호처리 회로의 핵심 연산블록으로 사용될 수 있는 복소수 승산기 코어의 파라미터화된 소프트 IP (Intellectual Property)를 설계하였다. 승산기는 응용분야에 따라 요구되는 비트 수가 매우 다양하므로, 승산기 코어 IP는 비트 수를 파라미터화하여 설계하는 것이 필요하다. 본 논문에서는 복소수 승산기의 비트 수를 파라미터화 함으로써 사용자의 필요에 따라 승수와 피승수를 8-b∼24-b 범위에서 2-b 단위로 선택하여 사용할 수 있도록 하였으며, GUI 환경의 코어 생성기 PCMUL_GEN는 지정된 비트 크기를 갖는 복소수 승산기의 VHDL 모델을 생성한다. 복소수 승산기 코어 IP는 redundant binary (RB) 수치계와 본 논문에서 제안하는 새로운 radix-4 Booth 인코딩/디코딩 회로를 적용하여 설계되었으며, 이를 통해 기존의 방식보다 단순화된 내부 구조와 고속/저전력 특성을 갖는다. 설계된 IP는 Xilinx FPGA로 구현하여 기능을 검증하였다.

• Macromolecular Research
• /
• v.9 no.2
• /
• pp.122-128
• /
• 2001

Monodisperse composite latex particles with size of ca. 300 nm, which consist ofn-butyl acrylate as a soft phase and methyl methacrylate as a hard phase with different morphology, were synthesized by seeded multi-stage emulsion polymerization. Three types of composite latex particles including random-, core/shell-, and gradient-type particles were obtained by using different monomer feeding methods during semi-batch emulsion polymerization. Effect of poly(butyl acrylate)-poly(methyl methacrylate) rubber particle morphology on the mechanical and rheological properties of rubber toughened poly(methyl methacrylate) was investigated. Among three different rubber particles, the gradient-type rubber particle showed better toughening effect than others. No significant variation of rheological property of poly(methyl methacrylate)/rubber blends was observed for the different rubber particle morphology.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.12
• /
• pp.1033-1047
• /
• 1989

A finite element method for the analysis of magnetic fields with hysteresis characteristics is proposed. The method employs Preisach model to describe hysteresis of magnetic material, so that even multi-branch or minor-loop characteristics can be taken into account. The problem can be considered as the analysis of a nonlinear equation where magnetization depends not only on the present value of the magnetic field but also on the past values, and the problem can be solved by the iteration method. Measurements were carried out on soft ferrite EI core for the comparison with computer solution, and good agreements were obtained. is investigated. A theoretical approach to gait study is proposed in which the static stability margins for periodic gaits are expressed in terms of the kinematic gait formula. The effects fo the stride length on static stability are analyzed and the relations between static stability and initial body configurations are examined. It is shown that the moving velocity can be increased to some extent without affecting stability margins for a given initial body configuration. Computer simulations are performed to verify the analysis.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.425-432
• /
• 2001

Compaction Grouting System, the method which makes ground compact by injection of low slump mortar, Is widely used for reinforcement of soft ground, restoration of structures happened differential settlement, underpinning and restoration of damaged dam core. The quantitive analysis of ground improvement for this method has not performed yet. So, design parameters about thls method must be studied through performance of CGS in various types of soil to make CGS adaptable widely. In this study PBT, SPT and field density test were performed for analysis of the characteristics of ground improvement and pressuremeter and inclinometer were installed for analysis of the characteristics of compaction in adjacent ground. In this paper, denoted much effects for filled ground that increasing of the bearing capacity, confirming the displacement of adjacent ground and the effective radius of injection.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.801-802
• /
• 2006

본 논문은 기존의 전기강판 재질을 이용한 모터가 아닌 SMC 재질을 이용한 모터 성형 시 발생 될 수 있는 문제점이 모터의 자기적 특성에 미치는 영향에 대해 분석 하였다. 기존의 전기 강판 재질 모터에서 밀도는 전 영역에서 고른 분포를 갖는 반면에, SMC를 이용한 모터는 위치와 형상에 따라 다른 밀도와 응력 분포를 지닌다. 따라서 본 논문에서는 이러한 SMC 재질을 이용한 모터의 특성이 전기적 에너지 변환 과정에 미치는 영향에 대해서 분석 하기위해, 고속모터(30000rpm)급 모터에서 silicon steel 재질 모터와 SMC 재질모터를 비교 하였다. 비교결과 SMC 재질 모터의 경우 밀도 편차가 5.8%이상 발생되었으며 이는 전기적 특성에 10%이상 영향을 미치는 것으로 나타났다. 특히 고속모터의 경우 자속 포화가 심해 일정하게 높은 밑도 특성이 요구 되는 것으로 파악 되었으며, 향후 이 방법은 SMC 재질을 이용한 모터 설계에 유용하게 이용 될 수 있을 것으로 판단된다.

• Journal of the Korean Magnetics Society
• /
• v.10 no.6
• /
• pp.302-309
• /
• 2000

An MFL (Magnetic Flux Leakage) testing system has been developed in order to inspect the non-metallic inclusions in the thin steel sheets. We have made a differential type flux-gate magnetometer using the measurement of apparent coercive field strength of soft magnetic core. The specifications of the electromagnet was determined using FEM software, and MFL testing system with 3 axis degree of freedom was constructed. The feasibility testing for non-metallic inclusion was shown using the system. By digitizing MFL signal and using 2-D graphic display, we could identify various surface defects other than the inclusions.

• Journal of Magnetics
• /
• v.2 no.4
• /
• pp.130-134
• /
• 1997

The amorphous Co-based alloy Co66Fe4Ni1B15Si14 (Metglas 2714A) is a suitable magnetic core material for high frequency operation. Appreciable reduction of the coercive force can be achieved by proper heat treatment. In this study, samples annealed at wide temperature range were analyzed using differential scanning calorimetry, high frequency B-H loop tester, X-ray diffractometer and resistivity meter. The results show that coercive force at 10 kHz decreases with in-creasing annealing temperature up to 773 K, but dramatically increases above this temperature. The squareness shows that the magnetic anisotropy on longitudinal direction of the as-cast state remains up to 773 K. Above this temperature, it decreases down to 0.5 that represents random distribution of magnetic domains. The crystallization abruptly occurs between 781 K and 783 K.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1365-1369
• /
• 2008

A large diameter sampler (KICT-type large diameter sampler) was developed to take undisturbed samples from not only soft ground but also sandy and weathered ground. The KICT-type large diameter sampler was manufactured with the principle of triple core barrel sampling. In this study, the applicability to offshore ground sampling of the KICT-type large diameter sampler was confirmed at Inchoen Port construction site. And, in order to compare the quality of samples taken by the sampler with that of the traditional piston sampler, a series of laboratory tests were performed. From the test results, the samples taken by the KICT-type large diameter sampler showed higher quality than the traditional thin-walled tube samples.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.884-890
• /
• 2012

Hysteretic behavior model of soft magnetic material usually used in electrical machines and electronic devices is necessary for numerical solution of Maxwell equation. In this study, a new dynamic hysteresis model is presented, based on the nonlinear dynamic system identification from measured data capabilities of fuzzy clustering algorithm. The developed model is based on a Gustafson-Kessel (GK) fuzzy approach used on a normalized gathered data from measured dynamic cycles on a C core transformer made of 0.33mm laminations of cold rolled SiFe. The number of fuzzy rules is optimized by some cluster validity measures like 'partition coefficient' and 'classification entropy'. The clustering results from the GK approach show that it is not only very accurate but also provides its effectiveness and potential for dynamic magnetic hysteresis modeling.