• Steel and Composite Structures
• /
• v.44 no.6
• /
• pp.899-912
• /
• 2022

To study the seismic performance of the all-steel buckling-restrained brace (BRB) using the novel soft steel LY315 for core member, a total of three identical BRBs were designed and a series of experimental and numerical studies were conducted. First, monotonic and cyclic loading tests were carried out to obtain the mechanical properties of LY315 steel. In addition, the parameters of the Chaboche model were calibrated based on the test results and then verified using ABAQUS. Second, three BRB specimens were tested under cyclic loads to investigate the seismic performance. The failure modes of all the specimens were identified and discussed. The test results indicate that the BRBs exhibit excellent energy dissipation capacity, good ductility, and excellent low-cycle fatigue performance. Then, a finite element (FE) model was established and verified with the test results. Furthermore, a parametric study was performed to further investigate the effects of gap size, restraining ratio, slenderness ratio of the yielding segment, and material properties of the core member on the load capacity and energy dissipation capacity of BRBs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1831-1835
• /
• 2014

Background: To investigate the relationship between extracellular matrix parameters and texture of prostatic lesions evaluated by transrectal real-time tissue elastography (TRTE). Methods: 120 patients suspicious for prostate cancer underwent TRTE. Targeted biopsies were carried out after 12-core systematic biopsy. Epithelia were stained with hematoxylin-eosin, and Victoria blue and Ponceau S were used to stain elastic-collagen fibers, and picric acid-sirius red for visualization of collagen type I (Col1) and III (Col3). Smooth muscles were visualized by immunohistochemistry. All image analyses were performed in a blind manner using Image Pro Plus 6.0, and the area ratios of epithelium, elastic fibers, collagen fibers and Col1/Col3 were determined. Results: 42 patients with typical elastograms were included in the final data analysis. Significant differences were detected between the benign and malignant groups in the area ratios of epithelium (P = 0.01), smooth muscles and Col1/Col3 (P = 0.04, P = 0.02, respectively). There were no significant differences in the area ratios of epithelium, smooth muscle and elastic fibers between the stiff and soft lesion groups. The area ratio of Col1 was ($0.05{\pm}0.03$) in the stiff group, and ($0.02{\pm}0.01$) in the soft group (P= 0.00). However, the area ratio of Col3 was ($0.03{\pm}0.02$) in the stiff group, and ($0.05{\pm}0.04$) in the soft group (P = 0.16). Col1/Col3 in the stiff group ($1.99{\pm}1.59$) was greater than in the soft group ($0.71{\pm}0.64$) (P = 0.01). Conclusions: Tissue hardness of prostatic tumors was mainly dependent on the Col1 content, Col1/Col3 being higher in malignant than in benign lesions, so the prostate tissue texture can be used as a target for distinguishing between the two with TRTE.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.1
• /
• pp.39-44
• /
• 2008

Recently, the demand for industrial and residential lands are being increased with economic growth, however, it is difficult to acquire the land for development with good ground condition. For efficient and balanced development of land, new development projects are being carried out not only the areas with inland but those with the soft ground as well. As soft grounds have complex engineering properties and high variations such as ground settlement especially when their strength is low and depth is deep, it needs to accurately analyze the engineering properties of soft grounds and find general measurement for stabilization and economic design and management. Prefabricated vertical drain technology is widely used to accelerate the consolidation of soft clay deposits and dredged soil under the preloading and various types of vertical drain are being used with the discharge capacity. Under field conditions, the discharge capacity is changed with various reason, such as soil condition, confinement pressure, long-term clogging and folding of vertical drains, and so on. Therefore, many researcher and engineer recommend the use of required discharge capacity. In this paper, the experimental study were carried out for two different types of vertical drains by utilizing the large-scale model tests and waste lime.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.607-616
• /
• 2022

A new axial flux permanent magnet machine with soft magnetic composited cores is proposed for electric vehicle application in this paper. The windings and soft magnetic composited cores can be designed to form a very compact structure, and; thus, the torque density can be improved greatly. To obtain the a good flux concentrating ability, two toroidally wound internal stator machines are designed and analyzed, and the designed motor is with NdFeB magnet for high-performance electric vehicle application. The 3-D finite-element method is used to analyze the electromagnetic parameter and performance, for performance comparison, a commercial axial flux permanent magnet machine is used. The proposed motor reduced weight about 5.8%, produced torque higher than about 8Nm for existing motor.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.4
• /
• pp.231-243
• /
• 2024

PURPOSE. The objective of the study was to analyze the impact of cement, bonding pretreatment, and ceramic abutment material on the overall color results of CAD-CAM ceramic crowns bonded to titanium-based hybrid abutments. MATERIALS AND METHODS. For single implant restoration of a maxillary lateral incisor a total of 51 CAD-CAM-fabricated monolithic lithium disilicate crowns were fabricated and subsequently bonded onto 24 lithium disilicate Ti-base abutments, 24 zirconia Ti-base abutments and 3 resin abutment replicas as a control group. The 48 copings were cemented with three definitive and one provisional cement on both grit-blasted and non-blasted Ti-bases. The color of each restoration and surrounding artificial gingiva was measured spectrophotometrically at predefined measuring points and the CIELAB (ΔE_ab) color scale values were recorded. RESULTS. The color outcome of ceramic crowns bonded to hybrid abutments and soft tissues was affected differently by cements of different brands. Grit-blasting of Ti-bases prior to cementing CAD-CAM copings affected the color results of allceramic crowns. There was a significant difference (P = .038) for the median ΔE value between blasted and non-blasted reconstructions at the cervical aspect of the crown. Full-ceramic crowns on zirconia Ti-base abutments exhibited significantly lower ΔE values below the threshold of visibility (ΔE 1.8). In all subcategories tested, the use of a highly opaque temporary cement demonstrated the lowest median ΔE for both the crown and the artificial gingiva. CONCLUSION. Various cements, core ceramic materials and airborne particle abrasion prior to bonding can adversely affect the color of Ti-base supported ceramic crowns and peri-implant soft tissue. However, zirconia CAD-CAM copings and an opaque cement can effectively mask this darkening.

• Journal of the Korean Magnetics Society
• /
• v.11 no.6
• /
• pp.239-244
• /
• 2001

Recently, RF inductor having researched by many workers, we fabricated and investigated properties of RF inductors. In order to improve the Q-factor (Quality), we try to apply the patterned Fe$_{78.81}$Ta$_{8.47}$N$_{12.71}$ soft magnetic thin film of 5000 which shows magnetic anisotropy of 30 Oe. Thus, patterned magnetic film was artificially increased magnetic anisotropy lead to increasing of ferro-magnetic resonance frequency up to GHz band. Coil as part of inductor was fabricated by lift off process. The dimension of RF inductor was designed 47un, rectangular shape, and measured properties. In the case of Ti/Ag air core type inductor shows Q of 9, inductance of 8.4 nH at 2 GHz. Magnetic film employed inductor shows inductance of 9 nH and FMR resonance frequency was 700 MHz.

• Journal of the Korean Magnetics Society
• /
• v.16 no.5
• /
• pp.249-254
• /
• 2006

CoFeNi alloys are some of the most studied soft magnetic materials because of their superial properties over FeNi alloys as write head core materials in HDD and MEMS. We studied the effect of magnetic property according to size and orientation of crystal for electroplated Co-Fe-Ni alleys. In case of heat treated ternary alloy, it affect the change of crystal size and structure. In this study, it intends to improve the magnetic properties of CoFeNi thin film by heat treatment. Minimized coercivity and increased magnetization are due to heat treatment from $300^{\circ}C\;to\;400^{\circ}C$. As a bcc phase formation, it grow to amount of magnetization.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.599-605
• /
• 2019

Ferrite cores are used as a soft magnetic material in the fabrication of couplers for inductive powerline communication (PLC). However, it is difficult to adjust the size freely according to the power-line and power-grid environment. In this paper, we report that a nano-crystalline alloy with higher permeability than ferrite can be used as an inductive coupler for non-contact PLC. Since nano-crystalline are produced in the form of a thin ribbon, the size of the coupler can be freely controlled by the number of ribbons wound on the toroidal core. It was fabricated with induction type coupler and showed to be suitable for non-contact power line communication. Experimental results show that the communication bandwidth is 45 Mbps for 100 m and 8 Mbps for 200 m under the current fluctuation of less than 100 A, and the reception ratio is 100%.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.277-296
• /
• 2023

The South Korean ethnic diaspora US lobby shows efficacy as an interest group in generating influence in American foreign and domestic public policy making. The persuasive portrayal of South Korea as a critical Cold War US ally reinforced US amenability to pro-South Korea lobbying. Also, the South Korean US diaspora is a comparatively recent immigrant group, thus its lingering resistance to assimilation facilitates its political mobilization to lobby the US government. One source of this influence includes the foundational legacy of proselytizing Western and particularly American religious social movement representatives in Korean religiosity and society. US protestant Christianity acquired a strong public association with emerging Korean nationalism in response to Japanese imperialism and occupation. Hostility towards Japanese colonialism followed by the threat from Soviet-sponsored, North Korean Communism meant Christianity did not readily become a cultural symbol of excessive external, US interference in South Korean society by South Korean public opinion. The post-Cold War shift in US foreign policy towards targeting so-called rogue state vestiges of the Cold War including North Korea enhanced further South Korea's influence in Washington. Due to essential differences in the perceived historical role of American influence, extrapolation of the South Korean development model is problematic. US hegemony in South Korea indicates that perceived alliance with national self-determination constitutes the core of soft power appeal. Civilizational appeal per se in the form of religious beliefs are not critically significant in promoting American polity influence in target polities in South Korea or, comparatively, in the Middle East. The United States is a perceived opponent of pan-Arab nationalism which has trended towards populist Islamic religious symbolism with the failure of secular nationalism. The pronounced component of evangelical Christianity in American core community nationalism which the Trump campaign exploited is a reflection of this orientation in the US.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.209-214
• /
• 2014

IMS(IP Multi-Media Subsystem) is in the limelight as the Integrated wire and wireless Systems because of a sudden increase of smart mobile devices and growth of multimedia additional services such as IPTV. The structure of IMS is designed as a session control layer to provide various multimedia summative service using SIP based on IP communication network in order to carry out set-up, change and release by NGN of course, the existing voice services. But now It is broadly substituting in the IPTV, wire phone company and it is substituted in internet platform base on the soft-switch in currently. Especially, in currently, 4G LTE in a mobile communication company is rapidly growing in market. Therefore, in this study, we had designed and developed to the main prosser that can admit to 1000 user over and SIP gateway which can link the IMS Core that can link SIP Device which adopt the standard protocol on the SIP and to provide variable multimedia services.