• 제목/요약/키워드: soft core

검색결과 261건 처리시간 0.027초

DVCR용 2-4-8 DCT/IDCT core의 VSIA 2.2 compliant Soft-IP가공 (Implementation of VSIA 2.2 compliant Soft-IP about 2-4-8 DCT/IDCT core used for DVCR)

  • 민경욱;박보윤;이영호;정정화
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
    • /
    • pp.157-160
    • /
    • 2000
  • 본 논문에서는 DVCR용 2-4-8 DCT core의 VSIA(Virtual Socket Interface Allience) 2.2 compliant IP의 구현에 대하여 기술한다. 본 논문에서 기술한 2-4-8 DCT/IDCT core는 Soft IP이며, VSIA의 deliverable document ver. 2.2에서 정의한 Soft-IP에 대한 72가지의 필수 항목, 조건부 필수 항목, 권고 항목 등의 전달물을 각 DWG(Development Working Group)의 사양에서 정의하고 있는 규격에 맞추어 가공하였다. 또한 본 논문에서는 Soft-IP에 대한 VSIA 권고안 및 VSIA deliverable list에 대하여 기술하고, VSIA compliant IP화를 위한 방법에 대하여 설명하였다.

  • PDF

포화자심을 이용한 하프브릿지 컨버터의 소프트스위칭에 관한 연구 (Soft Switching of Half-Bridge Converter Using Saturable Core)

  • 강찬호;김희준
    • 전자공학회논문지SC
    • /
    • 제39권6호
    • /
    • pp.71-78
    • /
    • 2002
  • 본 논문은 하프브릿지 컨버터와 포화자심으로 구성되는 간단한 회로에 의하여 소프트스위칭이 가능한 새로운 회로방식을 제안한다. 본 방식에서는 컨버터의 출력단자와 병렬로 각형의 자화특성을 갖는 포화인덕터를 결합하여 컨버터의 온시간과 인덕터의 불포화기간을 일치시킨다. 2개의 MOSFET 스위치에는 짧은 데드타임을 설정하여 그 기간에 자심의 포화인덕턴스와 스위치의 기생용량 성분에 의한 공진을 일으켜 소프트스위칭을 실현시킨다. 또한 전원 전압의 변동에 대처하기 위해 반도체와 선형인덕터를 가지고 자심의 동작을 모의한 새로운 실용회로를 제안한다. 본 논문에서는 포화자심의 모델링의 방법을 통하여 소프트스위칭의 원리를 해석하고 1.25kW의 컨버터에 대한 실험에 의해 그 타당성을 확인하였다.

코팅제 및 코팅 함량에 따른 철 분말 성형체의 특성 (Properties of compacted iron powder core coated with organic materials)

  • 민복기;김인성;김종령;최성조
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.264-267
    • /
    • 2005
  • Soft magnetic iron powders have been coated with polyester or phenol resin. And the coated powder (soft magnetic composite) have been pressed into ring type core over the pressure of 870 MPa. Green density, magnetic flux density, permeability, core loss of the samples were measured to look at the effect of the coating materials and the amount of them. Green density is increased with the amount of coating materials and shows the maximum value, 6.5 $g/cm^3$ at 5 w/o, but decreased over it. And lowest value of the core loss is showed for the 5 w/o coated samples.

  • PDF

윈도 마스킹 기법과 Soft-core Processor 기반 TDD 스위칭 제어 SoC 시스템 FPGA 구현 (Implementation of a Window-Masking Method and the Soft-core Processor based TDD Switching Control SoC FPGA System)

  • 양희진;이증섭;이한슬
    • 한국정보전자통신기술학회논문지
    • /
    • 제17권3호
    • /
    • pp.166-175
    • /
    • 2024
  • 본 논문에서는 시분할 이중화 방식의 MANET(Mobile Ad-hoc Network)망 동기화 시스템의 성능개선 및 경량화를 위해 윈도 마스킹 기법(Window-Masking Method)과 HAT(Hardware Attached Top) CPU SoM(System on Module)을 On-Device 화하여 RISC-V 기반의 Soft-core MCU로 하드웨어 가속기(Hardware Accelerator)인 FPGA에 탑재하는 것을 제안한다. 또한 실험을 통해 검증하였다. 실험 결과 성능 면에서는 제안한 기법을 적용하여 동기획득 범위는 -50dBm~+10dBm에서 -60dBm~+10dBm으로 동기 획득 최저 입력 레벨이 -50dBm에서 -60dBm으로 20% 증가, 검출 지연(Latency)은 220ns에서 125ns로 43% 감소하였다. 경량화 면에서는 Soft-core MCU로 대체 함으로써 컴퓨팅 자원(Resource, 48%), 크기(Size, 33%) 및 무게(Weight, 27%)가 평균 36% 경량화하였다.

Improvement in the Super Low Core-loss Soft Magnetic Materials

  • Maeda, Toru;Sato, Atsushi;Mochida, Yasushi;Toyoda, Haruhisa;Mimura, Koji;Nishioka, Takao
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1284-1285
    • /
    • 2006
  • We reported a P/M soft magnetic material with core loss value of $W_{10/1k}=68W/kg$, which is lower than that of 0.35mm-thick laminated material, by using high purity gas-atomized iron powder. Lack of mechanical strength and high cost of powder production are significant issues for industrial use. In order to achieve both low core loss and high strength by using inexpencive powder, the improvement of powder shape and surface morphology and binder strength was conducted. As the result, the material based on water-atomized powder with 80 MPa of TRS and 108 W/kg of core loss (W10/1k) was achieved.

  • PDF

Microstructure and Soft Magnetic Properties of Fe-6.5 wt.%Si Sheets Fabricated by Powder Hot Rolling

  • Kim, Myung Shin;Kwon, Do Hun;Hong, Won Sik;Kim, Hwi Jun
    • 한국분말재료학회지
    • /
    • 제24권2호
    • /
    • pp.122-127
    • /
    • 2017
  • Fe-6.5 wt.% Si alloys are widely known to have excellent soft magnetic properties such as high magnetic flux density, low coercivity, and low core loss at high frequency. In this work, disc-shaped preforms are prepared by spark plasma sintering at 1223 K after inert gas atomization of Fe-6.5 wt.% Si powders. Fe-6.5 wt.% Si sheets are rolled by a powder hot-rolling process without cracking, and their microstructure and soft magnetic properties are investigated. The microstructure and magnetic properties (saturation magnetization and core loss) of the hot-rolled Fe-6.5 wt.% Si sheets are examined by scanning electron microscopy, electron backscatter diffraction, vibration sample magnetometry, and AC B-H analysis. The Fe-6.5 wt.% Si sheet rolled at a total reduction ratio of 80% exhibits good soft magnetic properties such as a saturation magnetization of 1.74 T and core loss ($W_{5/1000}$) of 30.7 W/kg. This result is caused by an increase in the electrical resistivity resulting from an increased particle boundary density and the oxide layers between the primary particle boundaries.

Development of super convergent Euler finite elements for the analysis of sandwich beams with soft core

  • Sudhakar, V;Gopalkrishnan, S;Vijayaraju, K
    • Structural Engineering and Mechanics
    • /
    • 제65권6호
    • /
    • pp.657-678
    • /
    • 2018
  • Sandwich structures are well known for their use in aircraft, naval and automobile industries due to their high strength resistance with light weight and high energy absorption capability. Sandwich beams with soft core are very common and simple structures that are employed in day to day general use appliances. Modeling and analysis of sandwich structures is not straight forward due to the interactions between core and face sheets. In this paper, formulation of Super Convergent finite elements for analysis of the sandwich beams with soft core based on Euler Bernoulli beam theory are presented. Two elements, Eul4d with 4 degrees of freedom assuming rigid core in transverse direction and Eul10d with 10 degrees of freedom assuming the flexible core were developed are presented. The formulation considers the top, bottom face sheets and core as separate entities and are coupled by beam kinematics. The performance of these elements are validated by results available in the published literature. Number of studies are performed using the formulated elements in static, free vibration and wave propagation analysis involving various boundary and loading conditions. The paper highlights the advantages of the elements developed over the traditional elements for modeling of sandwich beams and, in particular wave propagation analysis.

Analytical solution for bending analysis of soft-core composite sandwich plates using improved high-order theory

  • Kheirikhah, M.M.;Khalili, S.M.R.;Fard, K. Malekzadeh
    • Structural Engineering and Mechanics
    • /
    • 제44권1호
    • /
    • pp.15-34
    • /
    • 2012
  • In the present paper, an improved high-order theory is used for bending analysis of soft-core sandwich plates. Third-order plate assumptions are used for face sheets and quadratic and cubic functions are assumed for transverse and in-plane displacements of the orthotropic soft core. Continuity conditions for transverse shear stresses at the interfaces as well as the conditions of zero transverse shear stresses on the upper and lower surfaces of the plate are satisfied. Also, transverse flexibility and transverse normal strain and stress of the orthotropic core are considered. The equations of motion and boundary conditions are derived by principle of minimum potential energy. Analytical solution for bending analysis of simply supported sandwich plates under various transverse loads are presented using Navier's solution. Comparison of the present results with those of the three-dimensional theory of elasticity and some plate theories in the literature confirms the accuracy of the proposed theory.

Development of Powdered Soft Magnetic Material Suitable for Electric Devices Operating at High Frequencies

  • Ishimine, Tomoyuki;Maeda, Toru;Toyoda, Haruhisa;Mimura, Kouji;Nishioka, Takao;Sugimoto, Satoshi
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.802-803
    • /
    • 2006
  • Recently, there has been a growing demand for soft magnetic materials with high conversion characteristics, due to the trend of electric devices to higher-frequency range. For ruduceing core loss in the high-frequency range, using finely grained and high-resistivity Fe-based alloy powder is most efficient methods. But, conventionally, there's been a compressibility problem for such powder. In this work, Fe-based alloy powder that offers both high resistivity and high compressibility was developed by studyuing composition of the powder, and reduction of core loss of P/M soft magnetic materials in the high frequency range was achieved.

  • PDF

로아큐탄 연질캡슐(이소트레티노인 10 mg)에 대한 니메겐 연질캡슐의 생물학적동등성 (Bioequivalence of NimegenTM Soft Capsule to RoAccutane® Soft Capsule (Isotretinoin 10 mg))

  • 양승권;나숙희;장규영;이윤영;윤미경;유수현;이경률;이희주
    • Journal of Pharmaceutical Investigation
    • /
    • 제37권4호
    • /
    • pp.255-261
    • /
    • 2007
  • A bioequivalence study of $Nimegen^{TM}$ soft capsule (Medica Korea Pharma. Co., Ltd.) to $RoAccutane^{(R)}$ soft capsule (Roche Korea Ind. Co., Ltd.) was conducted according to the guidelines of Korea Food and Drug Administration (KFDA). Thirty healthy male Korean volunteers received each medicine at the isotretinoin dose of 60 mg in a $2{\times}2$ crossover study. There was one week wash-out period between the doses. Plasma concentrations of isotretinoin were monitored by a high performance liquid chromatography (HPLC) for over a period of 48 hours after drug administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 48 hr) was calculated by the linear trapezoidal rule method. $C_{MAX}$ (maximum plasma drug concentration) and $T_{MAX}$ (time to reach $C_{MAX}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t\;and\;C_{MAX}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{MAX}$ ratio for $Nimegen^{TM}/RoAccutane^{(R)}$ were $log0.860{\sim}log0.98\;and\;log0.85{\sim}log1.00$, respectively. These values were within the acceptable bioequivalence intervals of $log0.80{\sim}log1.25$. Thus, our study demonstrated the bioequivalence of $Nimegen^{TM}\;and\;RoAccutane^{(R)}$ with respect to the rate and extent of absorption.