• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.213-221
• /
• 2009

This study provides the optimum papain treatment method and its effect on wool/polyester blend fabrics. The enzymatic treatment condition is optimized depending on its pH level, temperature, concentration of enzyme, treatment time and concentration of activators. The characteristics of samples treated with the papain are measured using weight loss, tensile strength, whiteness, WCA, dyeing property and surface micrographs. The results are described as follows: According to measuring weight loss, tensile strength and whiteness, a pH level of 7.5, $70^{\circ}C$, 10% papain(o.w.f.) and 60minutes of treatment time are optimized for papain treatment. L-cysteine and sodium sulfite are able to activate the papain. The optimum concentrations of them are 10mM and 50mM respectively. The WCA of fabrics is decreased since papain treatment makes wool/polyester blend fabrics more hydrophilic. Scouring with papain treatment improves whiteness and dyeing property of fabrics. The dyeing property of papain-treated fabrics is enhanced simply by a single step dyeing process using a basic dye. The surface of wool treated with papain in the presence of L-cysteine shows to be descaled. The surface of wool fibers in the presence of sodium sulfite, however, shows it is hydrolyzed evenly instead of being descaled. The surface of papain treated polyester fibers shows cracks and voids.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.30 no.5
• /
• pp.338-346
• /
• 2016

Signal transducer and activator of transcription 3 (STAT3) is associated with various human diseases, such as cancer, auto-immune disease, and intestinal inflammation. The limited and inadequate effect of standard approaches for treating inflammatory bowel disease (IBD) has prompted to develop alternative anti-colitis agents through inhibition of STAT3. Here, we show that gallic acid (GA), a 3,4,5-trihydroxybenzoic acid, markedly reduced phosphorylation of STAT3. Among the derivatives of benzoic acids, GA showed significant inhibition on STAT3 phosphorylation. In addition, GA ameliorated the dextran sodium sulfate (DSS)-induced acute colitis as determined by the measurement of symptomatic and histological indices. The suppression of DSS-induced acute colitis by GA treatment may be related to the regulation of cytokines and growth factors. Furthermore, GA inhibited phosphorylation of STAT3 in the colon tissue of DSS-treated mice. These findings may be useful in comprehending the molecular action of GA on STAT3 phosphorylation and provide novel insights into the potential application of GA in the treatment of STAT3-related inflammatory disease, such as IBD.

• Korean Journal of Veterinary Research
• /
• v.33 no.2
• /
• pp.199-209
• /
• 1993

The effects of ${\alpha}_1$-adrenergic stimulation on membrane potential, intracellular sodium activity $(a_N{^i{_a}})$, and contractility were investigated in the isolated papillary muscle of euthyroid, hyperthyroid, and hypothyroid guinea pigs. Cardiac alterations in the thyroid state have been shown to induce marked changes in action potential characteristics, the most pronounced shortening of action potential duration by hyperthyroidism and an increase in duration by hypothyroidism. $10^{-5}M$ Phenylephrine produced a decrease in $(a_N{^i{_a}})$ in euthyroid and hypothyroid preparations, but an increase in $(a_N{^i{_a}})$ in hyperthyroid ones. The major findings were that phenylephrine produced a stronger positive inotropic effect(PIE) without initial negative inotropic effect(NIE) in hyperthyroid preparations, while phenylephrine produced markedly NIE in hypothyroid ones. The alterations in membrane potential, $(a_N{^i{_a}})$, and contractility were abolished by $3{\times}10^{-5}M$ prazosin in hypothyroidism. In hypothyroid ventricular muscle, the decrease in $(a_N{^i{_a}})$ caused by phenylephrine were not abolished or reduced by $10^{-5}M$ strophanthidin, $10^{-5}M$ TTX, $3{\times}10^{-4}M$ lidocaine, or $100^{-5}M$ verapamil. These results indicate that the ${\alpha}_1$-adrenoceptor-mediated decrease in $(a_N{^i{_a}})$ is not associated with a stimulation of the $Na^+$-$K^+$ pump, inhibition of the $Na^+$ or $Ca^+$ channel in hypothyroid ventricular muscle. $10^{-5}M$ Phenylephrine decreased $(a_N{^i{_a}})$ but increased $(a_N{^i{_a}})$ in the presence of a PKC activator phorbol dibutyrate$(PDB_u)$. In conclusion, it is suggested that the following sequence of events in response to phenyleplhane occur in guinea pig ventricular muscle. First, changes in thyroid state may contribute to the ventacular electrophysiological propeties or ion transport system. Second, the adrenoceptor-mediated initial transient NIE may be associated with the decrease in $(a_N{^i{_a}})$ by PKC activation.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.545-551
• /
• 2020

An attempt was made to prepare hydrated liquid crystalline vesicles by utilizing a mutual self-assembly between phospholipid and ceramide. When an edge activator was added to the mixture of phospholipid and ceramide, it was possible to prepare a vesicle containing a high content of poorly soluble ceramide. In this study, we investigated changes in structural and thermal behaviors of the hydrated liquid crystalline phase according to the mixed composition between phospholipid, ceramide, and sodium deoxycholate. Also, both the droplet size of the vesicles with different composition and stability of the vesicle dispersion solution were observed. From results of the experiments, by increasing the ratio of ceramide up to 70% in the mixture between phospholipid and ceramide, a formulation containing 3.5 wt% of ceramide in the vesicle dispersion solution could be obtained.

• Composites Research
• /
• v.32 no.6
• /
• pp.375-381
• /
• 2019

Multiwalled carbon nanotubes (MWCNTs) are covalently functionalized with isocyanates by directly reacting commercial hydroxyl functionalized MWCNTs with excess 4,4'-methylenebis (phenyl isocyanate) (MDI) and hexamethylene diiosocyanate (HDI). HDI-modified MWCNTs results in a higher surface isocyanate density than MDI-modified MWCNTs. Anionic ring-opening polymerization of ε-caprolactam is conducted using a sodium caprolactam initiator in combination with a di-functional hexamethylene-1,6-dicarbamoylcaprolactam activator in the presence of isocyanate functionalized MWCNTs. This polymerization proceeds in a highly efficient manner at relatively low reaction temperature (150℃) and short reaction times (10 min). During the polymerization, the isocyanate functionalized MWCNTs act not only as reinforcing fillers but also as second activators. Nanocomposites with HDI modified MWCNTs exhibit higher reinforcement and faster isothermal crystallization than MDI modified MWCNTs. The results show that PA6 chains grow more effectively from HDI modified MWCNT surface than from MDI modified MWCNT surface, resulting in stronger interaction between PA6 and MWCNTs.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.395-400
• /
• 2008

This paper indicates the investigation about the development of ET (Environmental Technology) industrial geopolymeric materials from mixture silica mine waste, coal fly ash and alkali activator solution (sodium silicate) by the geopolymer technique at ambient temperature. The results showed that higher compressive strength of geopolymeric mortar increased with a reduce of L/S ratio and increased along with an increase of coal fly ash content. The compressive strengths of geopolymer mortar on low silica of C Silica Mine and K Silica Mine are 18.7 MPa, 20.4 MPa, respectively. Compressive strength of geopolymeric mortar depends on L/S ratio and coal fly ash content added.. Additionally, scanning electron microscope (SEM) techniques are used to characterize the microstructure of the geopolymeric mortars. SEM observation shows that it is possible to have amorphous aluminosilicate gel within mortar. XRD patterns indicate the fact that geopolymeric mortar is composed of amorphous aluminosilicate phase, calcite and quartz.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.4
• /
• pp.471-477
• /
• 1998

Cyclosporin A (CsA), a widely used immunosuppressant, is well known to cause nephrotoxicity and hypertension as major side effects. The present study was aimed at investigating the effects of CsA-pretreatment on the activities of cytosolic guanylate cyclase (cGC) in relation to the alteration of relaxant responses in the rat thoracic aorta. CsA $(10\;{\mu}M)-preincubation$ for 90 min significantly attenuated the vasodilatation induced by sodium nitroprusside (SNP), a cytosolic guanylate cyclase activator, shifting the dose-response curve to the right. The increase in cGMP contents induced by SNP was markedly attenuated by CsA. SNP ($1\;{\mu}M{\sim}\;mM$) increased the cGC activity dose-dependently, and the increase was completely abolished by CsA. CsA attenuated the SNP-induced cGC activation dose-dependently. The abolishing effect of CsA-pretreatment on the SNP-induced cGC activation was not affected by washing the preparation, suggesting that the inhibition is irreversible. When CsA was added simultaneously with SNP, cGC activation was not attenuated. 1-(5-isoquinolinylsulfonyl)-2-methyl piperazine (H-7), a protein kinase C (PKC) inhibitor, decreased SNP-induced cGC activation and blocked the CsA-attenuation of cGC activation. These results suggest that CsA directly inhibits cGC participating in the CsA-induced impairment of vasodilatation, and that PKC is involved in the inhibitory action of CsA on cGC.

• Advances in nano research
• /
• v.4 no.3
• /
• pp.181-195
• /
• 2016

Addition of nano-$SiO_2$ (NS) to geopolymer composites has been studied through measurement of compressive strengths, FTIR and XRD analysis. Alumino-silicate materials are coarse aggregate included waste concrete and demolished walls with its cementing binder, cement kiln dust (CKD) used and can possess a pronouncing activation for the geopolymer reaction resulting from the high alkali contents within. Materials prepared at water/binder ratios in a range of 0.30: 0.40 under curing of $40^{\circ}C$ and 100% Relative Humidity (R.H.), while the used activator is sodium hydroxide in the ratio of 2 wt. %. First, CKD is added in the ratio from 10 up to 50 wt., %, and the demolished walls was varied depending on the used CKD content, while using constant ratio of waste concrete (40 wt., %). Second step, depending on the optimum CKD ratio resulted from the first one (40 wt. %), so the control geopolymer mix composed of cement kiln dust, demolished walls and waste concrete in the ratio (40:20:40, wt %). Nano-silica partially replaced waste concrete by 1 up to 8%. Results indicated that, compressive strengths of geopolymer mixes incorporating nano-silica were obviously higher than those control one, especially at early ages and specially with 3%NS.

• Advances in nano research
• /
• v.3 no.4
• /
• pp.225-242
• /
• 2015

The current investigation aims to study performance of geopolymer mortar reinforced with Multiwalled carbon nanotubes upon exposure to $200^{\circ}C$ to $1000^{\circ}C$ for 2 hrs. MWCNTs are doped into slag Geopolymer mortar matrices in the ratio of 0.0 to 0.4, % by weight of binder. Mortar composed of calcium aluminosilicate to sand (1:2), however, binder composed of 50% air cooled slag and 50% water cooled slag. Various water / binder ratios in the range of 0.114-0.129 used depending on the added MWCNT, while 6 wt., % sodium hydroxide used as an alkali activator. Results illustrate reduction in mechanical strength with temperature except specimens containing 0.1 and 0.2% MWCNT at $200^{\circ}C$, while further increase in temperature leads to decrease in strength values of the resulting geopolymer mortar. Also, decrease in firing shrinkage with MWCNT up to 0.1% at all firing temperatures up to $500^{\circ}C$ is observed, however the shrinkage values increase with temperature up to $500^{\circ}C$. Further increase on the firing temperature up to $1000^{\circ}C$ results in an increase in the volume due to expansion.

• Advances in concrete construction
• /
• v.15 no.3
• /
• pp.149-159
• /
• 2023

Water glass (WG) and sodium sulfate (SS) were used to prepare polymeric aluminum chloride residue cement mortar (PACRM) by single and compound blending with polymeric aluminum chloride waste residue, respectively. The structural strength and textural characteristics examinations showed that PACRM consistency increased by incorporating WG, but decreased by incorporating SS. When WG and SS were compounded, the mortar consistency initially rose before falling. The compressive strength of PACRM increased and then decreased as WG was increased. The mechanical properties of PACRM were better enhanced by SS than WG, showing no strength deterioration. The main reason for the improved mechanical properties of polymeric aluminum chloride waste residue in the presence of activators is the increased precipitation of reactive substances, such as C-S-H gels, calcium silica, and Ca(OH)₂. The density of the specimens with PACRM and the degree of aggregation of hydration products were significantly enhanced by generating more hydration products in the mortar. Further, the cracks and pores were significantly reduced, and the matrix structure was continuous and dense at 5% SS doping and 3% compound doping.