• 한국잠사곤충학회지
• /
• 제10권
• /
• pp.57-58
• /
• 1969

Artificial silkworm eggs must do washing the acid completely after soaking HCl. Author experimented following deacidification times: 30 minutes, 1 hour, 2 hours, 6 hours soaking and 12 hours soaking eggs in the fresh water after artificial hatching, and incubated room temperature. There was no difference 1 hour's with control but more than 1 hour deacidification influenced badly in hatching ratio. Especially above than 6 hours deacidification was not only delaying 1 day in hatching date but also decreasing in practical hatching ratio.

• 동아시아식생활학회지
• /
• 제26권5호
• /
• pp.457-465
• /
• 2016

Effects of soaking time on the physicochemical and structural characteristics of waxy rice flours and starches purified from flours using the alkaline steeping method were investigated. Korean cultivar Sinseonchal waxy rice was washed and soaked in tap water (1:2 w/w) and stored at room temperature for 15 days. On each day of soaking for 0, 1,2 3, 5, 10, and 15 days, pH of soaking water was measured and rice grains were dried, ground, and passed through 100 mesh sieve. The pH was reduced to 3.90 by day 5 and increased to 4.60 by day 15. The protein and ash contents, swelling powers and solubilities of flours and starches decreased with increasing soaking time. The water-binding capacities increased while trends were not similar to soaking time. The flour particle size distribution ranged from two to four peaks with increasing soaking times. Starch granule size decreased with increasing soaking time. The peak, trough, and final viscosities of flours and starches showed similar trends until 10 days and 15 days, respectively. The starches presented higher viscosities than the flours. The branch chain length distributions of amylopectin of starches showed an increaseed DP6~12 portion and decreased DP13~24 portion with increasing soaking time of waxy rice grains.

• 한국약용작물학회지
• /
• 제20권2호
• /
• pp.136-139
• /
• 2012

This study is part of research to develop the technology for managing major medicinal crops after harvest. We studied the optimal germination conditions of $Cynanchum$ $wilfordii$ (Maxim.) Hemsl. The mean germination time (MGT) of $C.$ $wilfordii$ seeds was higher after soaking for 4 days after storage at $5^{\circ}C$ for 8 weeks, than with germination at $25^{\circ}C$ (3 days). However, the germinative energy (GE) decreased as the number of days soaking increased. The greatest germination rate ($83.3{\pm}8.8%$) was at $25^{\circ}C$ with no soaking of seeds stored at $-20^{\circ}C$ for 8 weeks. Based on these results, we characterized the germination conditions of a major medicinal crop.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.80.1-80.1
• /
• 2000

• 한국식품조리과학회지
• /
• 제23권6호
• /
• pp.908-918
• /
• 2007

To prepare ready-to-use rice flour as de novo material for processed rice foods, glutinous(W) and normal rice grains (N) were soaked for 1, 8, and 12 hours prior to processing. One half (DG) was air-dried and milled, and the other (WG) was milled and air-dried. General, morphological and pasting properties of the flours (NDG, NWG, WDG, WWG) were compared to those of a control (raw milled rice without soaking). The general compositions of the rice flours varied with soaking. Crude ash was considerably decreased at the beginning of soaking (1 hour). With the soaking, the rice flour, having polygonal shaped particles and a layered surface, acquired particles with smooth edges, which were then uniformly distributed. Additionally, the WG flour was lighter and had a lower ${\Delta}E$ value than the DG flour, due to a higher L and less +b as a result of soaking. Compared to the control, the WBC of the normal rice flour was decreased significantly with soaking, and the WG flour had significantly lower WBCs than the DG flour. Stirring number (SN), an indicator of ${\alpha}-amylase$ activity, was highly and significantly correlated with WBC (r=-0.85, p=0.0001) in the normal rice flour. At $80^{\circ}C$, the SP and solubility of all the soaked rice flours were much higher than those of the control. Positive (r=+0.85, p=0.0001) and negative (r=-0.61, p=0.02) correlations between the SP and solubility of the normal and glutinous rice flours were found, respectively. Using RVA, the pasting temperature of NDG was lower than that of NWG (p<0.0001). The peak viscosities of all the soaked flours were significantly decreased with soaking (p<0.0l), with the highest viscosity in the normal rice flour soaked for 8 hrs. Total setback, indicative of retrogradation, was lower in NDG than in NWG, with the lowest setback at 8 hrs of' soaking. Based on these finding, the NDG flour with 8 hrs of soaking was less damaged, and had a lower total setback and lower pasting temperature, which would make it an appropriate rice flour for commercial mass production.

• 한국식품조리과학회지
• /
• 제8권3호
• /
• pp.315-321
• /
• 1992

This investigation was undertaken for me purpose of studying me sensory and textural properties of Julpyun (Korean traditional rice cake) made by various soaking time (1, 4, 6, 8, and 12 hours) of rice during storage at room temperature. The storage periods were 2, 4, 6, and 10 hours. Sensory evaluation was done by a panel of 12 judges majoring in food and nutrition. The luation was repeated 3 times. Objective evaluation was done by rheometer and color difference meter. As a result of me sensory evaluation for Julpyun made by various soaking time and storage periods, mere were significant differences (p<0.001) in most of characteristics between soaking time and storage periods. Julpyun made by soaking time for 12 hours showed the most favorite tendency during storage periods. The result of textural properties measured by rheometer showed similar trend to those of sensory evaluation. By me color difference meter, L (lightness) value were increased by increasing the soaking time. There were significant differences (p<0.001) between me samples.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.173-181
• /
• 1994

A Cold spot temperature control system for the batch annealing furnace has been estabilished in order to reduce energy consumption to improve productivity and stabilize the propertics of products. Therefore we confirmed a relation between annealing cycle time and atmospheric gas, variation of coil cold spot temperature with time during heating and actual temperature measurements at mid-width of each coil during heating and actual temperature measurements at mid-width of each coil during soaking. The results of the tempaeature variation effect on the batch annealing are as follows. 1) Heating time is reduced to one half with increasing atmospheric gas flow rate and changing of atmospheric gas component from HNx to Ax gas, and annealing cycle time is reduced to 2.7 times. 2) In case of short time healing, the slowest heating part is the center of B coil, in case of long time heating, the low temperature point moves from the center of coil to inside coil. And the temperature in this part is higher than other parts when cooling. When finished heating, the cold spot is located 1/3 of coil inside in case of HNx atmospheric gas. But center of coil in case of Ax atmospheric gas. 3) The outside of top coil is the highest temperature point when heating, which becomes the lowest temperature point when cooling. So, this point becomes high temperature zone at heating and low temperature zone at cooling, It has relation according to atmospheric gas component and flow rate. 4) Soaking time at batch annealing cycle determination is made a decision by the input coil width, and soaking time for quality homogenization of 1214mm width coil must be 2.5 hours longer than that of 914mm width coil for the same ciol weight. 5) Annealing cycle time with Ax atmospheric gas is extended 1 hour in of slow cooling during 5 hours in order to avoid rapid cooling.

• 한국식품영양과학회지
• /
• 제17권2호
• /
• pp.85-94
• /
• 1988

두유의 고삽미와 불쾌취를 제거하기 위한 기초 자료를 얻기 위하여 대두에 NaOH, $NaHCO_3$ 용액을 처리하여 phenol 화합물의 변화를 HPLC로 정량하였고, 두유중의 beany flavor를 GC로 분석하였으며, 두유의 일반성분 및 기호도를 측정한 결과 대두중의 phenol 화합물은 chlorogenic, p-hydroxybenzoic, p-coumaric, ferulic, gentisic acid가 확인되었으며, chlorogenic acid 함량이 가장 높았다. 대두중의 phenol 화합물중 chlorogenic acid는 주로 결합형, 기타 다른 phenol 화합물은 유리형으로 대부분 존재하였다. 대두를 0.1% NaOH용액으로 8시간 침지하였을 때 chlorogenic acid는 85% 이상이 제거되었다. 대두중의 phenol화합물 제거에는 NaOH용액이 효과적이었고, 온도가 높아짐에 따라 제거율도 높아졌으며, 0.1% NaOH용액에게서 $90^{\circ}C$, 1시간처리하였을 때 phenol 화합물은 대부분 제거되었다. 물, 0.1% NaOH 및 0.5% $NaHCO_3$ 용액으로 침지하여 제조한 두유의 일반성분은 처리간에 비슷하였다. NaOH 용액 처리에 의하여 두유의 beany flavor 중 hexanol은 증가하였으나, hexanal, propanal, pentanal은 60% 이상이 제거되었다. NaOH 용액처리, 고온침지처리에 의하여 두유의 yellowness는 증가하였으나 물과 저온 침지처리에서는 whiteness가 증가하였다. 대두를 0.1% NaOH 용액으로 $90^{\circ}C$에서 1시간 처리하여 제조한 두유의 기호도가 가장 좋았다.

• 전기의세계
• /
• 제31권6호
• /
• pp.437-444
• /
• 1982

Although several kinds of conduction mechanism of PTC thermistor have been reported, there were few satisfying results. In this paper, the reported conduction mechanism theories were scrutinized and analyzed by using the experimental results. PTC thermistors for this study were manufactured by adding Sb$\_$2/O$\_$3/, AI$\_$2/O$\_$3/, TiO$\_$2/, and SiO$\_$2/ to BaTiO$\_$3/, and by sintering it at different temperatures. In order to analyze the conduction mechanism, R-T characteristics and its frequency dependence of specimens were measured. And also, the structures of specimens were studied. Especially this paper emphasized the explanation of the resistivity characteristics as the grain growth state of PTC thermistor specimens with respect to soaking temperature. According to the results, the resistivity of PTC thermistor whose grain was formed by semiconducting, was independent to the grain size at room temperature. For small and uniform grain size, the slope of the resistivity near the Curie temperature and the resistivity above the Curie temperature became greater and PTCR effect was improved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1193-1194
• /
• 2015

The volume electrical resistivity of $3.777{\times}10^{13}{\Omega}{\cdot}cm$ of dried CSPE for 660~750 days after seawater & freshwater soaking is lower than $4.011{\times}10^{13}{\Omega}{\cdot}cm$ of that before seawater soaking. The peak binding energy of oxygen and sulphur of CSPE after seawater & freshwater soaking are shifted above 1.0ev. The grass transition temperature($T_g$) of $-19.76^{\circ}C$ of seawater & freshwater soaked CSPE are lower than $-19.59^{\circ}C$ of that of non-soaked CSPE. The melting temperatures($T_m$) of seawater & freshwater soaked and non-soaked CSPE are $45.58^{\circ}C$ and $45.59^{\circ}C$, respectively.