• 한국작물학회지
• /
• 제47권3호
• /
• pp.244-249
• /
• 2002

콩나물 재배시 침지조건과 방법에 따른 품종별 형태적 특성과 수분흡수율 및 생육특성을 비교한 결과는 다음과 같다. 1 외형적 특성은 100립중이 평균 9.0$\pm$2g인 소립종으로, 종피색은 황색이며 구형인 것이 좋으며, 공시 품종 중 풍산나물콩이 양호한 것으로 나타났다. 2. 나물콩 품종의 수분흡수율은 품종간에 다소의 차이가 인정되었으며, 준저리와 길림3호는 온도가 높을수록 수분흡수율이 높았고, 풍산나물콩의 경우는 20-$25^{\circ}C$구간에서 양호하였다. 3. 침지 후 콩 종실의 길이는 l10mm 이상에 도달하는 시간이 약 15시간, 두께의 경우는 건수침 반복은 침지완료 이후, 1회 침지는 3시간이후, 무침지는 9시간이후 이었고, 콩 종실의 수분흡수는 수온이 2$0^{\circ}C$이내인 경우 1회 침지구나 건수침 반복구의 경우 초기 3시간 이내에 급속하게 이루어졌다. 4. 콩의 발아율은 2$0^{\circ}C$에서 1시간 처리구와 15$^{\circ}C$에서 2시간 처리한 것에서 품종간의 차이가 인정되었으며, 발아세의 경우 길림 3호는 침지방법과 처리온도에 관계없이 양호하였고, 준저리와 풍산나물콩의 경우는 3시간 침지구에서 처리온도에 관계없이 가장 양호하였다. 5. 콩나물의 길이는 다른 무침지와 1회침지 방법에 비해 건수침 반복구에서 빠른 생육을 보였고, 두께의 증가는 1회 침지구가 건수침 반복구보다 양호하였다.

• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.211-218
• /
• 2008

The performance of positive plates depends on the structure of the lead dioxide active mass. The positive active materials (PAM) consists of a skeleton, built up of agglomerates and macropores. Agglomerates, in their turn, comprise particles and micropores. This paper described a study conducted to determine the effects of different soaking times between the acid fill and formation stages of the tubular plate production. For the positive plates a lead oxide were filled into tubular bag with a red lead. After filling the positive plates were soaked in $H_2SO_4$ solution. X-ray diffraction(XRD), scanning electron microscopy(SEM) and electrical testing had been used to study the compositional and morphological aspects of the positive active material(PAM) just prior and after formation. Results indicate that PAM compositions were effected by the soaking time and acid density of $H_2SO_4$ solution. It can be seen that as the soaking time duration increases, $\alpha$-PbO, $Pb_3O_4$, and Pb were all gradually sulphating. Composition of 3BS reached a maximum at around 3 h duration and $H_2SO_4$ of sp. gr. 1.10 on soaking. This results would suggest that the most beneficial conditions for soaking were the $H_2SO_4$ of sp. gr. 1.10 and 2 to 6 h of soaking.

• 한국안광학회지
• /
• 제16권3호
• /
• pp.237-245
• /
• 2011

목적: 안경 렌즈에 물리적, 화학적 자극이 반복적으로 가해졌을 때 렌즈 코팅막의 기능에는 어떠한 변화가 나타나는 지를 알아보고자 하였다. 방법: CR-39 재질의 안경 렌즈 표면에 물리적, 화학적 자극으로 테이프 떼기, 아세톤 문지르기, 아세톤에 침윤 및 증류수에 침윤하기를 시행한 후 렌즈 표면의 변화, 광투과율 변화, 김서림 시간 변화 및 손상된 렌즈 표면의 안정성 여부를 측정하였다. 결과: 하드 코팅의 기능 변화를 알아보기 위한 표면관찰시 아세톤에 침윤한 안경 렌즈만이 침윤 30분 후부터 표면의 변화가 나타났다. 반사방지 코팅의 기능 변화를 알아보기 위한 광투과율 측정시 증류수에 180분간 침윤한 안경 렌즈는 1% 정도의 미세한 감소를 보인 반면 아세톤에 침윤시킨 렌즈에서는 침윤 60분 후 반사방지 코팅의 기능이 거의 소실됨을 알 수 있었다. 안티포그 코팅의 기능 변화를 알아보기 위한 김서림 지속시간 측정시 아세톤에 침윤시킨 안경 렌즈에서 김서림 지속시간이 증가하였다. 자극에 의해 손상받은 코팅막의 안정성을 알아보았을 때 테이프로 떼어내기, 아세톤으로 문지르기, 증류수에 침윤 및 아세톤에 침윤시킨 렌즈 표면의 코팅 손상이 관찰되었다. 결론: 반복적인 물리적, 화학적 자극으로 인하여 안경 렌즈의 코팅 변화가 관찰되었으므로 안경 조제 과정 중이나 안경 착용 시 이에 대한 주의가 요구된다.

• 한국작물학회지
• /
• 제60권1호
• /
• pp.114-122
• /
• 2015

침종 기간과 침종 후 발아의 유무에 따른 단백질 발현을 이차원전기영동을 이용하여 단백질 발현양상을 확인하고 비교 분석한 결과, 침종 기간과 침종 후 발아의 유무에 따른 단백질 발현 양상은 전반적으로 매우 유사하였으며, 주요 단백질의 발현에는 차이가 없었다. 침종 기간에 따른 품종별 단백질 발현 양상은 침종 기간이 길어짐에 따라 단백질 발현정도가 점차 증가되는 것을 확인할 수 있었다. 공시품종들 중 황금콩, 단엽콩, Peking이 다른 품종들에 비하여 침종 4일후에 단백질 발현정도가 급격히 증가하는 것을 알 수 있었다. 침종 후 발아 유무에 따른 단백질 발현양상은 소수의 단백질 spot들을 제외하고는 전반적으로 모든 공시 품종들에서 발아한 종자에서의 단백질 발현정도는 미발아 종자에서보다 높게 확인되었다.

• Geomechanics and Engineering
• /
• 제24권2호
• /
• pp.115-127
• /
• 2021

This paper investigates the effects of soaking on a lime stabilized high plasticity clay and evaluates the implications for pavement design. In this context, the soil was stabilized by 4%, 6% and 9% hydrated lime. The soil was pulverized in two different gradations so that representative field gradations could be simulated. Both soil pulverization levels passed the relevant field gradation criteria. Curing durations were chosen as 7 days, 28 days and 56 days. Two groups of samples were prepared and were tested in unconfined compression test apparatus to measure the strength and secant modulus at failure values. One of the groups was tested immediately after curing. The other group of samples were first cured and then subjected to soaking for ten days before testing. Visual observations were made on the samples during the soaking period. The results showed the superiority of fine soil pulverization over coarse soil pulverization for unsoaked conditions in terms of strength and modulus values. Soaking of the samples affected the unconfined compressive strength and modulus values based on lime content, curing duration and soil pulverization level. In soaked samples, fine soil pulverization resulted in higher strength and modulus values compared to coarse soil pulverization. However, even with fine soil pulverization, effects of soaking on modulus values were more significant. A new term named as "Soaking Influence Factor (SIF)" was defined to compare the reduction in strength and modulus due to soaking. The data was compared with the relevant design guidelines and an attempt was made to include Soaking Influence Factors for strength and modulus (SIFS and SIFM) into pavement design processes. Two equations which correlated secant modulus at failure to unconfined compressive strength were proposed based on the samples subjected to soaking. The results of this study showed that in order to decrease the diverse effects of soaking for lime stabilized soils, soil pulverization level should be kept as fine as possible in the field. Importance of proper drainage precautions in the pavements is highlighted for better performance of the pavements.

• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.56-61
• /
• 2017

Purpose: High energy requirement and long cooking time are limiting consumption of pigeon pea (Cajanus cajan), a nutritious food. This study was performed to estimate energy and time demand by different methods of cooking pigeon pea. Methods: Pigeon pea (150 g) was soaked in 2.0 L of water at ambient temperature ($29{\pm} 2^{\circ}C$) to determine hydration behavior. Cooking experiments were conducted using aluminum and pressure-cooking pots. Efficiency of cooking was evaluated using four types of cooking appliances (kerosene, liquefied petroleum gas (LPG), electric, and charcoal stoves). Normal (continuous heating until the food was satisfactorily cooked) and control (controlling the energy input to closely match the actual energy required) cooking were conducted. Energy requirement and duration of cooking were determined using standard procedures. Results: Soaking increased moisture content from 11.99 to 30.01% in 90 min, while water absorption rate decreased with soaking duration. In cooking 150 g of pigeon pea using kerosene stove, presoaked normal pressure-pot cooking method consumed the least energy (10 800 kJ) and time (205 min), while unsoaked normal cooking consumed the highest energy (18 450 kJ) and time (336 min). Using LPG stove, unsoaked normal cooking method required the highest energy (52 470 kJ), while presoaked control pressure-pot required the least energy (14 405 kJ). For electric stove, the lowest energy (15 560 kJ) and shortest duration (105 min) were recorded during control cooking of presoaked sample in the pressure-pot. Conclusions: Control cooking was not practicable using charcoal stove. Generally, kerosene stove consumed the least energy, while electric stove was found to have the shortest duration of cooking.

• Journal of the Korean Wood Science and Technology
• /
• 제50권6호
• /
• pp.392-403
• /
• 2022

Currently, composite board manufacturing using natural fibers has the potential to expand owing to environmental awareness. To produce a composite board, treatment is required to improve the mechanical and physical properties of the natural fibers. In this study, sodium chloride (NaCl) was used for the chemical treatment. However, studies on chemical treatments using NaCl are limited. This study aimed to investigate the characteristics of kenaf fibers after NaCl treatment. The NaCl treatment concentrations were 1, 3, and 5 wt.% at room temperature, with soaking durations of 1, 2, and 3 h. The tensile strength, strain, and Young's modulus were measured to evaluate the mechanical properties of the fibers. The fiber bundle diameter, weight change owing to treatment, and contact angle were determined to analyze the effect of NaCl treatment. The kenaf fiber bundle treated with 5 wt.% NaCl for 3 h exhibited the highest tensile strength, Young's modulus, reduction in fiber bundle diameter, weight change, and decrease in contact angle compared to those of untreated fiber bundles. The tensile properties of the fiber bundle exhibited a tendency to decrease with increasing fiber bundle diameter. Increasing the soaking duration from 1 to 2 h did not result in a significant decrease in the fiber bundle diameter or an increase in tensile strength. However, a further increase in the soaking duration from 2 to 3 h resulted in a considerable decrease in the fiber bundle diameter and an increase in the tensile strength.

• 한국결정학회지
• /
• 제3권1호
• /
• pp.1-8
• /
• 1992

졸겔 및 공침법으로 제조된 티탄산 납 분말의 형태를 하소온도와 하소시간의 함수로 조사하였다. 질산 납과 사염화 티탄의 혼합용액을 사용하여 40-43℃ 및 9.0-9.7 pH에서 PbTiO3 전구체를 제조하였으며, 350-1000℃에서 1-10시간동안 공기중에서 이들을 히소시켰다. 하소온도와 시간의 증가에 따라 입자의 크기가 증가하고 응집이 심화되었다. 졸겔법으로 제조된 분말을 700℃에서 히소시킬 때, 초기에 형성된 침상형 혹은 각주 형의 입자들은 하소가 진행됨에 따라 다면체형으로 변한뒤, 모서리가 둥근 다면체형 입자로 성장하였다. 공침법으로 제조된 분말은 결정화 과정중에 형태가 변화되지 않았다.

• 대한가정학회지
• /
• 제33권3호
• /
• pp.243-253
• /
• 1995

This study has been carried out for the antimicrobial effects of organic silicon quaternary ammonium salt with which cotton, polyester, and wool were treated respectively, using Esherichia coli and Proteus bulgaris which are experimental bacteria for clothing materials. As a results, the best antimicrobial effects of organic silicon quaternary ammonium salt came out from cotton ; the next form wool ; and lower from polyester. With the changes of the temperature, the antimicrobial effect with soaking time, there was no changes with cotton after 10 minutes passed. It seemed to have reacted entirely in the early stage. The longer the soaking duration was, the higher the effect from polyester was. The effect from wool was increased until 20 minutes, but decreased after 30 minutes. The optimal processing condition of cotton was in the condition of liquor ratio 40:1, concentration 0.5%, soaking time 5 minutes, and temperature 3$0^{\circ}C$ ; wool was 1.5%, 20 minutes, and 6$0^{\circ}C$ ; polyester was 2.0%, 30 minutes, and 3$0^{\circ}C$ respectively. The changes of the effect by washing was as followings : The processing effect on cotton and wool appeared to be everlasting, since they had no changes by washing 10 times ; while, it was remarkablely decreased with polyester by washing only once, and was almost disappeared after washing 10 times, which means that polyester has no durability to washing.

• 한국작물학회지
• /
• 제43권3호
• /
• pp.157-160
• /
• 1998

To find out the effects of humidification and hardening of rice (Oryza sativa L. cv. Ilpumbyeo) seeds on the germination, both normal and artificially aged seeds with 60% germination rate were humidified at 40, 60, and 80% RHs and $25^{\circ}C$ for five weeks or hydrated for 6, 12, 18, and 24 hours at $25^{\circ}C$ from one to five cycles for hardening. Relative humidity and duration of humidification did not affect the germination rate of normal seeds, while reduced the time to get 50% germination rate ($T_{50}$) by 1.0～1.6 days compared to that of normal seeds at $25^{\circ}C$. Aged seeds humidified at 40 and 60% RHs did not affect the germination rate and $T_{50}$ regardless of relative humidity and duration of treatment, while at 80% RH, the germination rate decreased and $T_{50}$ increased significantly with the duration of humidification. Hardening of normal seeds reduced $T_{50}$ by 0.7～1.1 days without changes in the germination rate. However, the germination rate and $T_{50}$ of aged seeds soaked in water for 6, 12, and 18 hours were similar regardless of soaking/drying cycles, while hardening of artificially aged seeds with 1～4 cycles in 24 hours soaking increased the germination rate by 11-16% and reduced $T_{50}$ by 1.4～2.0 days.