• Korean Journal of Medicinal Crop Science
• /
• v.20 no.5
• /
• pp.393-397
• /
• 2012

This study was investigated seed germination of Rheum undulatum L. depends on storage temperature (-20, $5^{\circ}C$ and room temperature), germination temperature (5, 15, 25 and $40^{\circ}C$) and a soaking treatment (no soaking, 2 days and 4 days). There was not much difference from the germination rate of R. undulatum L. in storage temperature conditions for 8 weeks. The highest of germination rate occurred over 80 percentage at $25^{\circ}C$. When R. undulatum L. was soaked with tap water for four days, the average values of germination velocity and germination day were represented of 1.7 ea/day and 1.68 days. These results may help our understanding of variations in germination characteristics for R. undulatum L. seeds treated under various germination conditions.

• Food Science and Preservation
• /
• v.7 no.4
• /
• pp.384-388
• /
• 2000

This study was carried out to investigate the optimal process conditions of instant soybean soup for the soybean noodles. The process of soybean soup was in the other or soaking, cooking, peeling, drying, milling and packaging. The optimal conditions of soaking process obtained at 25$\^{C}$ for 4hrs, and the protein content of yellow and black soybean after soaking treatment were 21.97% and 19.58%, respectively. As the increasing of cooking time, the moisture content was not changed, and optimal cooking condition through the sensory evaluation was obtained at 100$\^{C}$ and 15min. The protein contents of cooked yellow and black soybean dried by hot-air and far infrared-ray were 43.40∼44.18% and 44.59∼51.36%, respectively. From the results of sensory evaluation, the yellow and black soybean dried with far infrared-ray at 45$\^{C}$ for 5hrs were excellent, and the difference between the marketed soybean soup and instant soybean soup produced by this experimental process for soybean noodles was not exist. The optimal concentration of instant soybean soup for soybean noodles was determined to be 50g of soybean powder with 1L water.

• Journal of Korea Foundry Society
• /
• v.24 no.4
• /
• pp.231-237
• /
• 2004

Bake hardenable steel utilizes the phenomenon of strain aging to provide an increase in the yield strength of formed components. An increase of the carbon content will improve the bake hardening response: more solutes are available to pin mobile dislocations and to form the clusters more rapidly. But aging resistance decrease as increasing solute carbon. In order to under-stand the compatibility between bake hardenability and aging resistance. The optimum solute carbon control methods during manufacture should be determined. In this paper, the effect of continuous heat cycle conditions such as soaking temperature, rapid cooling start temperature, cooling rate on BH(Bake Hardenability), AI(Aging Index), YP-El(Yield Point Elongation) and other mechanical properties have been investigated. and following results were obtained. In the case of soaking temperature, BH increases with higher soaking temperature because of NbC $dissolution(830^{\circ}C)$, Therefore the solute carbon and BH at $850^{\circ}C$ and $870^{\circ}C$ are higher than these at $810^{\circ}C$. But BH at $870^{\circ}C$ is a little lower than that at $850^{\circ}C$ owing to the ferrite grain size. The measurement of amount of dissolution C using IFT(Internal Friction Test) can explain the relation of solute carbon and BH.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.83-89
• /
• 2007

In our study, lactic acid bacteria (LAB)-fermented whey solutions were applied in the soybean soaking process to minimize bacterial contamination and to enrich the biologically functional components of isoflavone and $\gamma$-aminobutyric acid (GABA). Among the 11 LAB tested, Bifidobacteria infantis and a mixed culture (Lactobacillus acidophilus, Bifidobacteria lactis, and Streptococcus thermophilus; ABT-3) displaying the greatest $\beta$-glucosidase activity were selected to produce improved biologically functional soybean preparations. In the soybean soaking processing (without water spraying), the LAB-cultured 10% whey solution was used to soak and to ferment the soybeans and the fermented soybeans were finally dried by heat-blowing at $55^{\circ}C$. The processing conditions used in this study demonstrated that the final soybean product had a reduced contamination by aerobic and coliform bacteria, compared to raw soybeans, likely due to the decrease in pH during LAB fermentation. The aglycone content of the isoflavone increased up to 44.6 mg per 100 g of dried soybean by the processing method, or approximately 8-9 times as much as their initial content. The GABA contents in the processed samples increased as the processing time of soaking-fermentation proceeded as well. The soybean sample that fermented by ABT-3 culture for 24 hr showed the greatest increase in GABA content (23.95 to 97.79 mg/100 g), probably as a result of the activity of glutamate decarboxylases (GAD) released from the soybean or produced by LAB during the soaking process.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.5
• /
• pp.37-46
• /
• 2016

In order to determine the variability of environmental characteristics of lightweight air-foamed soil using marine clay according to freezing-thawing and soaking conditions, unconfined compressive strength of the lightweight air-foamed soil samples made by changing the amount of cement under curing conditions of outdoor low temperature, underground or indoor wetting were observed. Compressive strength was not increased under freezing-thawing (temperature range of $-9.1^{\circ}C{\sim}17.2^{\circ}C$) regardless of the amount of cement but the more cement using, it was increased rapidly by underground curing conditions within 30 cm beneath ground level. Therefore, it is necessary to install insulation layer cutting off exterior cold air after construction of lightweight air-foamed soil in condition of freezing-thawing. Bulk density was increased too small under the long-time soaking condition, it tended to decrease rapidly when samples were dried up and had below 6% of water contents. But variability of compressive strength and bulk density was very small for preventing drying and keeping its wet state. The lightweight air-foamed soil that installed beneath ground water level or covered by soil can be evaluated as a long-term reliable construction material.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3144-3149
• /
• 2007

A numerical analysis for temperature distribution of four different materials such as iron, silicon, aluminum and PVC has been performed in this study to predict thermal behaviors of combined weapon systems in a large environmental tester. Thus, experimental conditions have been proposed using a calculating software (SolidWorks 2007 COSMOS FloWorks) to prepare for field tests and analyze heat flow inside the environmental tester and temperature distributions of materials. The boundary conditions of the analysis are composed of inlet and outlet conditions of the environmental tester with different pressures and the limit of low temperature of -30$^{\circ}C$. The soaking time of the system in the environmental tester has been calculated by this commercial program in this study to carry out the experiment.

• Korean journal of food and cookery science
• /
• v.15 no.5
• /
• pp.490-499
• /
• 1999

The purpose of this study was to investigate the changes of taste components in the boiled beef brisket soup stock and shank soup stock by varying pretreatment, boiling temperature and time. Free amino acids and nucleotides color and sensory evaluation in each samples were analyzed. The results were obtained as follows : 1. The amount of free amino acids in the brisket soup stock pretreated by soaking and blanching showed a tendency to increase in proportion to boiling time. The amount of glutamic acid in the brisket soup stock was much in order of soaking > blanching > roasting pretreatment. While the amount of glutamic acid in the boiled soup stock samples pretreated by soaking and blanching was much more at low temperature than at high temperature, the glutamic acid contents in the boiled soup stock pretreated by roasting were large at high temperature. The amount of glutamic acid in pretreated by soaked soup stock showed the highest and recorded 8.73 mg% at 6 hour-low temperature-boiling. 2. The amount of free amino acids in the shank soup stock did not show any regular tendency and had few changes in quantity by the methods of pretreatment. Each amount of glutamic acid in the shank soup stock pretreated by soaking and blanching was the highest, when boiled for 3 hours at high temperature. The samples pretreated by roasting showed the highest record 2.49 mg%, when boiled for 6 hours at high temperature, but could not recognize any regular tendency in the case of boiling at low temperature. 3. The amount of nucleotides in the brisket soup stock generally showed increase in proportion to boiling time. The amount of 5'-IMP extracted from the brisket soup stock was much in order of blanching > soaking > roaking pretreatment, but few differences between blanching and soaking soup stock samples. The amount of 5'-IMP extracted from soup stock samples pretreated by soaking and blanching was high at low-boiling and by roasting at high-boiling. Each amount of 5'-IMP extracted from soup stocks pretreated by soaking(BSL) and blanching(BBL) was the highest at 6 hour-low-boiling(37.06 mg%), and 5 hours(38.37 mg%) respectively. The amount of 5'in the soup stock pretreated by roasting(BRH) showed the highest records at 6 hour-high-boiling(10.85 mg%). 4. The amount of 5'-IMP extracted from the shank soup stock preteated by soaking and blanching showed a tendency to decrease after 3 hours boiling irrelative of boiling temperature. The amount of 5'in the shank soup stock was much in order of soaking > blanching > roasting pretreatment and showed high at the boiling of high temperature. In the sample pretreated by roasting it showed the highst records when boiled for 6 hours at high temperature(1.55 mg%). 5. The L Value of the brisket soup stock pretreared by roasting at high temperature(BRH) was the lowest and the b value of it was the highest of all the brisket samples boiled for 6 hours. No differences were found in the Value of L, a, and b in shank soup stock by the methods of pretreatment and boiling temperature. 6. The sensory scores in color and flavor of the brisket soup stock showd that BRH was higher than the other samples, and the preference in taste and overall was the highest in BSH while it was the lowest in BRH. The preference in the all sensory characteristics of SSH was higher than any other shank soup stock, but did not show any significant difference statistically.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.810-817
• /
• 2013

This study investigated the properties of rice snack puffed in a microwave oven after drying its dough according to Baekjinju soaking time and additional soybean milk. The optimum conditions for the non-fried rice snack using Baekjinju wetted flour were determined through the design of an experiment using response surface methodology. The independent variables were the Baekjinju soaking time and the additional soybean milk, and the dependent variables were the weight, volume, density, expansibility, Hunter's color value, hardness, and sensory properties. The quadratic model was chosen for the weight, density, expansibility, b value, and hardness. The two-factor interaction model was chosen for the volume, flavor, appearance, and overall preference. The linear model was chosen for the L value, taste, and texture. The weight was increased to longer than 11.26 days with the increase in the rice soaking. The volume, expansibility, L value, and b value increased with the increase in the rice soaking time and in the additional soybean milk ratio. However, the density was decreased was in reverse. The hardness increased most, with the rice soaking time rising from 5.28 to 8.53 days and the soybean milk additional ratio increasing from 5.34 to 20.26%. The sensory properties improved as rice soaking time decreased, and the soybean milk additional ratio was revered. As for the desirability, the optimal formulation of the dough of non-fried rice snack was achieved by mixing 200 g of Baekjinju flour with a 0.69 days rice soaking time and a 26.67% soybean milk of rice ratio according to weight.

• Korean Journal of Food Science and Technology
• /
• v.23 no.4
• /
• pp.490-497
• /
• 1991

Kongjaban (a Korean-style seasoned black soybean) prepared under various conditions such as different soaking temperatures and time, cooking rate, and amounts of sugar and soy sauce was investigated with respect to its physical and sensory qualities. Soaking soybeans in water at $20^{\circ}C$ and $60^{\circ}C$ prior to heating decreased the hardness, degree of browning and saltiness of kongjaban, regardless of soaking temperature. As the cooking time after addition of sugar and soy sauce increased, the degree of browning, saltiness and hardness of kongjaban increased markedly. The amount of sugar and soy sauce did not make a distinct difference in its physical properties whereas its hardness increased slightly with increasing sugar amount. According to the sensory evaluation, the color, hardness and saltiness of kongjaban significantly increased with increasing cooking time. Color, hardness and sweetness increased as the amount of sugar increased whereas the amount of soy sauce did not affect the sensory characteristics except for saltiness.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.225-229
• /
• 1999

Unstable seedling stand establishment of wet direct seeding culture of rice is one of the major elements preventing the extension of its culture area. In order to develop methods of seedling stand improvement in direct seeded rice on flooded surfaces, three field experiments were conducted on silty loam soil using a cultivar 'Donjinbyeo' for three years, mainly focusing on water management after seeding and seed soaking with plant growth regulators (PGRs). Under the condition of shallow flooding after seeding, seedling stand rate increased and floating seedling rate decreased in both early and normal season seeding compared to deep flooding. With earlier draining time after seeding, there was a tendency towards preferential growth of the seminal root, increase of seedling stand and decrease of the floating seedling rate. Therefore the highest seedling numbers per unit area and the lowest floating seedling numbers were found upon drainage at 1 day after seeding (DAS), while a contrary tendency was shown upon conventional drainage at 7 DAS. Seed soaking with PGRs such as Metalaxyl or mixing of Metalaxyl with gibberellic acid (GA$_3$) significantly increased the seedling stand. In addition the effects of PGR treatment on seedling stand and the early growth of plants were greater under flooded conditions than under drained conditions after seeding, although draining of water after seeding improved the seedling establishment rate more when compared with the PGR treatment. These results suggest that draining management after seeding or maintaining of shallow flooding for a week is the most effective method to improve the seedling stand rate in wet direct seeding.