• Korean journal of food and cookery science
• /
• v.23 no.3 s.99
• /
• pp.314-320
• /
• 2007

The objective of this study was to investigate the effect of grain size on the physicochemical properties of rice porridge. Here, the grain size of the rice was classified as whole grain, half grain, and flour by traditional Korean cooking methods. The viscosity of the rice flour porridge was highest for the among the three different grain size porridges. In the amylographs, the increase in viscosity for the whole grain porridge was higher than that of the rice flour porridge during cooling. The soluble solid and reducing sugar contents of the rice porridges increased according to the rice grain size, while the blue value decreased. The SDI (starch digestion index) increased according to the rice grain size. The RDS (rapidly digestible starch) was highest while the SDS (slowly digestible starch) the lowest in the rice flour porridge. The morphologies of the rice porridges were examined by SEM and showed a smoother surface and more exudated gelatinized granules in the rice flour than in the whole grain rice porridge. In conclusion, rice porridges made from the smallest possible grain size such as flour may be helpful for people with weaker digestive systems such as infants, the elderly, and hospital patients.

• Physical Therapy Korea
• /
• v.11 no.1
• /
• pp.75-83
• /
• 2004

The purpose of this study was to research the effects of vocalization on upper extremity motion during occupational performance and to compare non-meaning and meaning vocalization. Experiments were performed on 30 subjects. They had no medical history of neurological problems with their upper extremities. Using a tea cup, a tea tray, and a tea spoon, they set a table during vocalization. We used meaning and non-meaning vocalization with the subjects. An example of meaning vocalization would be naming something, and an example of non-vocalization would be saying, "Ah." We used a 3-D analysis system called CMS-HS. We analyzed the motion in the angular velocity and acceleration of the elbow while recording performance time. The results of this study showed that vocalization enhanced the angular velocity and acceleration of the elbow, and also enhanced performance time. In short, vocalization improved upper extremity motion by making it faster and smoother. There were no significant differences between meaning and non-meaning vocalization.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.496-501
• /
• 2009

In this study, a kiwifruit-produced protease was used to improve the quality of the wool and silk fabrics. The wool and silk were treated with the actinidin from kiwifruit. Following this protease treatment, changes in the surface of a single yarn of the fabrics were observed via both an optical microscope and a scanning electron microscope (SEM). In order to determine the amount of dye uptake in the fabric, changes in the K/S value of the wool and silk were measured by spectrophotometric analysis. Also, we performed a tensile strength examination to determine variation in their mechanical properties. By increasing the protease treatment time to 48h, the dyeing properties of fabrics were enhanced, and the surfaces of the single yarns of the fabrics became smoother, because of the removal of soil and scale in them. However, no mechanical changes were detected in the fabrics. Thereby, we suggest that the kiwifruit-produced actinidin treatment can improve the quality of the fabrics.

• International Journal of Oral Biology
• /
• v.39 no.4
• /
• pp.187-192
• /
• 2014

Nonthermal atmospheric pressure plasma has attracted great interest for biomedical applications. The plasma consists of charged particles, radicals, and a strong electric field as the fourth state of matter. This study evaluated the change in the surface roughness after tooth bleaching by plasma in combination with a low concentration (15%) of carbamide peroxide, specifically whether the application of plasma produced detriments, such as demineralization and structural change, with the goal of efficient and safe tooth bleaching. After being combined with plasma and 15% carbamide peroxide, the hydroxyapatite surface was significantly smoother with a low roughness average value. Tooth bleaching with 15% carbamide peroxide alone produced an irregular surface and increased the surface roughness with high roughness average value. Tooth bleaching with plasma resulted in no significant variations in hydroxyapatite in terms of change in surface roughness and surface topography. The application of tooth bleaching with plasma is not deleterious to dental hard tissue, implicating it as a safe tooth bleaching technique.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1246-1251
• /
• 2003

The fracture behaviors of Zr-based bulk amorphous metals(BAMs) having compositions of $Zr_{55}Al_{10}Ni_{5}Cu_{30}$, were investigated under impact loading and quasi-static conditions. For experiments, a newly devised instrumented impact testing apparatus and the subsize Charpy specimens were used. The influences of loading rate and the notch shape on the fracture behavior of the Zr-based BAM were examined. The Zr-based BAMs showed an elastic deformation behavior without any plastic deformation on it before fracture. Most fracture energies were absorbed in the process of the crack initiation. The maximum load and fracture absorbed energy under quasi-static condition were larger than those under impact condition. However, there existed relatively insignificant notch shape effect. Fracture surfaces under impact loading were smoother than those under quasi-static loading. The absorbed fracture energy appeared differently depending on the extent of the vein-like pattern region due to the shear bands developed at the notch tip. It can be found that the fracture energy of the Zr-Al-Ni-Cu alloy is closely related with the development of shear bands during fracture.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.572-583
• /
• 2016

In view of the speed control characteristics of induction traction motors and the problems of direct torque control (DTC) algorithms in current applications, this paper presents a DTC algorithm characterized by a symmetrical polygon flux control and a closed loop power control in the constant-torque base speed region and constant-power field-weakening region of induction traction motors. This algorithm only needs to add a stator flux control algorithm to the traditional DTC structures. This has the benefit of simplicity, while maintaining the features of traditional algorithms such as a rapid dynamic response, uncomplicated control circuit, reduced dependence on motor parameters, etc. In addition, it obtains a smoother flux trajectory that is conducive to improvement of the harmonic elimination capability, the switching frequency utilization as well as the torque and power performance in the field-weakening region. The effectiveness and feasibility of this DTC algorithm are demonstrated by both theoretical analysis and experimental results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.164-168
• /
• 2005

Piezoelectric ZnO thin films were for the first time formed on SiO$_2$/Si(100) substrate using 2-step deposition, atomic layer deposition(ALD) and RF magnetron sputtering deposition, for film bulk acoustic resonator(FBAR) applications. The ZnO buffer layer by ALD was deposited using alternating diethyl zinc(DEZn)/$H_2O$ exposures and ultrahigh purity argon gas for purging. The ZnO films by 2-step deposition revealed stronger c-axis-preferred orientation and smoother surface than those by the conventional RF sputtering method. The solidly mounted resonator(SMR)-typed FBAR fabricated by using 2-step deposition method revealed higher quality factor of 580 and lower return loss of -17.35dB. Therefore the 2-step deposition method in this study could be applied to the FBAR device fabrication.

• Speech Sciences
• /
• v.11 no.2
• /
• pp.105-117
• /
• 2004

Recently, many scholars have emphasized the importance of English listening ability for smoother communication. Most audio materials, however, were recorded in a quiet sound-proof booth. Therefore, students who have spent so much time listening to the ideal audio materials are expected to have difficulty communicating with native speakers in the real life. In this study, we examined how well thirty three Korean university students and five native speakers will repeat the recorded English sentences under noise and speed conditions. The subjects' production was scored by listening to each recorded sentence and counting the number of words correctly produced and determined the percent ratios of correctly produced words to the total words in each sentence. Results showed that the student group correctly repeated around 65% of all the words in each sentence while the native speakers demonstrated almost perfect match. It seemed that the students had difficulty perceiving and repeating function words in various conditions. Also, high-proficiency student group outperformed the low-proficiency student group particularly in their repetition of function words. In addition, the student subjects' accuracy of repetition remarkably dropped when the normal sentences were both sped up and mixed with noise. Finally, it was observed that the Korean students' percent correct ratio fell down as the stimulus sentence became longer.

• Archives of Plastic Surgery
• /
• v.43 no.4
• /
• pp.321-327
• /
• 2016

There are many women who want larger and brighter eyes that will give a favorable impression. Surgical methods that make the eye larger and brighter include double eyelidplasty, epicanthoplasty, as well as lateral canthoplasty. Double eyelidplasty produces changes in the vertical dimension of the eyes, whereas epicanthoplasty and lateral canthoplasty create changes in the horizontal dimension of the eyes. Epicanthoplasty, a surgical procedure which enlarges the eye horizontally, is performed at the inner corner of the eye, whereas lateral canthoplasty enlarges the outer edge of the eye. In particular, if the slant of the palpebral fissure is raised and the horizontal dimension of the palpebral fissure is short, adjusting the slant of the palpebral fissure through lateral canthoplasty can achieve an enlargement of eye width and smoother features. Depending on the patient's condition, even better results can be achieved if this procedure is performed in conjunction with other procedures, such as double eyelid-plasty, epicanthoplasty, eye roll formation surgery, fat graft, and facial bone contouring surgery. In this paper, the authors will introduce in detail their surgical method for a cosmetic lateral canthoplasty that lengthens the lateral canthal angle and corrects the outer tail of the eyes, in order to ease the unfavorable impression.

• International Journal of Highway Engineering
• /
• v.20 no.4
• /
• pp.1-6
• /
• 2018

PURPOSES : The objective of this study is to evaluate of the effect of thermal segregation reduction in asphalt paving using material transfer vehicles (MTVs). METHODS : Asphalt paving using MTVs was carried out, and the paved surface temperature was measured using an infrared camera. The amount of thermal segregation was estimated from temperature variations. RESULTS : The transportation of hot mix asphalt (HMA) using dump trucks caused temperature segregation that persisted in the paving surface if an MTV was not used. The average temperature variation was 8.58% in paved surfaces where an MTV was not used. However, the temperature variation was 3.10%, 2.86%, and 4.53% for the base layer, inter-layer, and surface layer, respectively, when an MTV was used. CONCLUSIONS : The use of an MTV in asphalt paving reduces thermal segregation approximately 2.3 times in an asphalt mat via a remixing process and also allows for a smoother work process because the paver never needs to stop to receive HMA. However, MTV equipment without pre-heating devices requires careful temperature control during the warm up process at the MTV during construction in the winter.