• 한국해양학회지
• /
• 제25권4호
• /
• pp.189-204
• /
• 1990

태평양 클라리온-클리퍼톤 균열대 서부의 KODOS(Korea Deep Ocean Study)지역에 분포하는 망간단괴의 성인과 분포, 그리고 분포 원인을 규명하기 위하여 망간단괴와 퇴적물을 채취하여 화학 및 광물학적 분석을 하였다. 이 지역의 망간단괴는 Mn/Fe 비 가 크고 구리, 니켈, 아연, 마그네슘, 토도로카이트 함량이 높으며 표면조직이 거친 속성기원의 망간단괴(S-형 망간단괴)와 철, 코발트, 버나다이트 함량이 높고 표면조직 이 매끈한 수성기원의 망간단괴(S-형 망간단괴) 그리고 화학 및 광물조성과 표면조직 이 두 기원의 중간성격을 띄는 망간단괴(R-S-형 망간단괴)로 구분된다. 성인 및 부존 밀도 등의 특성에 따라 KODOS-89 지역은 크게 4지역으로 구분된다. 즉, 부존밀도가 10 kg/m$^2$이하이고 수성기원의 망간단괴가 분포하는 최북단지역, 부존밀도가 1 kg/m$^2$ 내 외이고 속성기원의 망간단괴가 분포하는 남부 지역, 그리고 부존밀도가 10 kg/m$^2$ 이 상으로 높고 수성기원의 망간단괴가 분포하는 해저산지역으로 구분된다. 이러한 망간 단괴의 분포특성은 주로 위도에 따른 수층의 생산성 및 해저지형의 차이에 의해 기인 되었다고 생각된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.320-323
• /
• 2000

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area ($\pi$-A) isotherms. And, the surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy (AFM) and UV-vis spectroscopy, respectively. Also, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity and the dielectric constant. In the AFM images, we conclude that surface morphology of PU-DCM LB films is smooth and homogeneous and has optimal hydrophobicity and good stability, whereas PU-CN LB films give rougher surfaces with more excess material. In the I-V characteristics, the conductivity is different as to the polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.

• 대한기계학회논문집B
• /
• 제37권4호
• /
• pp.377-385
• /
• 2013

출구유로 단면적이 수직 환상공간 내부의 풀비등 열전달에 미치는 영향을 규명하기 위하여 세 가지 서로 다른 유동제한장치를 실험적으로 연구하였다. 가열 튜브는 매끈한 표면을 가지는 스테인리스강이며 대기압 상태 하에 있는 물을 사용하였다. 환상공간의 하부유로 조건은 개방과 폐쇄된 경우 두 가지를 모두 고려하였으며 유동제한장치를 설치한 환상공간에 대한 결과를 유동제한장치가 없는 환상공간에 대한 결과와 서로 비교하였다. 출구유로 단면적을 축소하는 것은 열전달의 감소를 초래하지만, 출구 유로가 아주 작은 경우 열전달계수가 증가하는 경우도 관찰되었다. 이러한 경향은 기포군집의 형성과 이동에 따른 액체교란의 차이로서 설명되며, 유동대류, 맥동류 발생, 기포 군집 하부의 미세층증발이 중요한 열전달 기구인 것으로 확인하였다.

• Corrosion Science and Technology
• /
• 제19권6호
• /
• pp.310-317
• /
• 2020

This study investigated the damage to the specimen due to liquid droplet impingement erosion corrosion, which improved the corrosion resistance and durability via hard anodization of 5083-H321 aluminum alloy, which is widely used for small ships and marine structures. The experiment combined liquid droplet impingement erosion and electrochemical equipment with the flow rates in natural seawater solution. Subsequently, Tafel extrapolation of polarization curves was performed to evaluate damage due to the liquid droplet impingement erosion corrosion. The damaged surface was observed using a 3D microscope and a scanning electron microscope. The degree of pitting damage was measured using the Image J program, and the surface hardness was measured using the micro-Vickers hardness tester. The corrosion current density, area, depth, and ratio of the damaged areas increased with the increase in flow rate. The grain size of the damaged area at a flow rate of 20 m s-1 showed fewer and minor differences in height, and a smooth curved shape. The hardness of the damaged surface tended to decrease with increase in flow rate.

• 펄프종이기술
• /
• 제29권4호
• /
• pp.53-63
• /
• 1997

Most cellulose resources come from the higher plants, but bacteria also synthesize same cellulose as in plants. Many scientists have been widely studied on the bacterial cellulose, the process development, manufacturing, even marketing of cellulose fibers. The bacterial celluloses are very different in its physical and morphological structures. These fibers have many unique properties that are potentially and commercially beneficial. The fine fibers can produce a smooth paper with enchanced its strength property. But there gave been few reports on the mechanical properties of the processing of bacterial cellulose into structural materials. This study were performed to elucidate the mechanical properties of sheets prepared from bacterial cellulose. Also reinforcing effect of bacterial cellulose on the conventional pulp paper as well as surface structures by scanning electron microscopy were discussed. Paper made from bacterial cellulose is 10 times much stronger than ordinary chemical pulp sheet, and the mixing of bacterial cellulose has a remarkable reinforcing effect on the papers. Mechanical strengthes were increased with the increase of bacterial cellulose content in the sheet. This strength increase corresponds to the increasing water retention value and sheet density with the increase of bacterial cellulose content. Scanning electron micrographs were shown that fine microfibrills of bacterial celluloses covered on the surfaces of hardwood pulp fibers, and enhanced sheet strength by its intimate fiber bonding.

• 폴리머
• /
• 제27권4호
• /
• pp.340-348
• /
• 2003

변형된 Stud-pull 시험 방법을 통해 탄소강 기재 위에 발포된 폴리우레탄의 접착 강도를 측정하였다. 아연인산으로 처리한 표면이 거친 탄소강 위에서 발포시킨 폴리우레탄의 접착 강도는 0.95 kN으로서 표면이 매끈한 양극산화된 탄소강 위에서 발포된 폴리우레탄의 접착 강도인 0.38 kN 보다 높게 나타남으로서 그 타당성이 입증되었다. 이 시험법을 여러 온도로 미리 가열된 탄소강 기재 위에서 폴리우레탄을 발포 접합시킨 시료들에 적용한 결과, 6$0^{\circ}C$ 이상으로 미리 가열된 금속 기재 위에서 발포된 폴리우레탄은 높은 접착 강도를 나타내었다. 또한 위의 시료를 수증기를 흡착하는 용기에 노출시켜 접착 강도를 측정하였는데 4$0^{\circ}C$ 보다 낮거나 7$0^{\circ}C$의 높은 온도로 유지된 금속 기재 위에서 발포된 폴리우레탄의 접착 강도는 많이 감소하였다. HCFC-141b와 HFC-245fa로 발포된 폴리우레탄의 접착력을 비교하였는데 HFC-245fa로 발포된 시료의 접착력이 0.03 kN 만큼 낮았으며 두 시료를 수증기에 노출시 HFC-245fa로 발포된 시료는 계면 근처에 존재하는 가스로 채워진 빈공간 영역의 적은 면적 비율로 인해 접착력이 거의 그대로 유지되었다. 이런 현상들은 기재의 온도, 기재의 표면 처리 방법, 발포제의 종류에 따라 금속 기재와 고분자와의 계면 근처에서의 미세조직학적인 차이에 의한 결과로 판단된다.

• 자원환경지질
• /
• 제45권5호
• /
• pp.477-486
• /
• 2012

북동태평양 대한민국 망간단괴 광구중 하나인 KR1 지역에서 망간단괴의 분포특성을 파악하기 위하여 정밀수심 측량과 망간단괴의 특성(외형, 조직, 크기, 금속함량) 분석을 수행하였다. 작고(<2 cm), 매끄럽고(s-형), 불규칙하고(I-형), Fe의 함량이 높은 망간단괴가 KR1의 북동부(KR1-2) 지역에 우세하게 분포하는 것에 비하여, KR1의 남서부(KR1-1) 지역에서는 상대적으로 Mn, Cu, Ni의 함량이 높고, 크고(2~4 cm), 거칠고(t-형, d-형), 원반형(D-형)의 망간단괴가 우세하게 분포하는 것으로 나타났다. 정밀수심 자료에 의하면 상대적으로 KR1-1 지역은 수심이 깊고(3,838~4,799 m; 평균 4,599 m), KR1-2 지역은 3,940~4,664 m (평균: 4,451 m)의 수심을 보이며 소규모의 해저산이 발달해 있다. KR1 지역에서 나타나는 이러한 수심과 망간단괴에 포함된 Mn, Cu, Ni의 함량과의 상관성은 태평양 전역에 걸쳐 나타나는 일반적인 특성과도 일치한다. 또한 망간단괴의 크기와 형태와 관련하여, KR1-2 지역에 분포하고 있는 소규모 해저산에서부터 망간단괴의 핵으로 사용되는 암편의 공급이 원활하기 때문에 작고 매끄럽고 불규칙한 초기 형태의 망간단괴가 주로 분포하고 있는 것으로 판단된다. 이러한 연구결과는 망간단괴의 분포특성에 있어서, 수심과 더불어 해저지형의 특성이 중요한 변수로 작용할 수 있음을 보여준다.

• 대한의용생체공학회:의공학회지
• /
• 제27권5호
• /
• pp.224-228
• /
• 2006

The object of this study is to investigate the potential of dual-electrospun polymer based structure for vascular tissue engineering, especially for the medium or small sue blood vessels. Polyurethane(PU), which is known to be biocompatible in this area, was electrospun with poly(ethylene oxide) (PEO). Concentration of PU was fixed at 20wt%, while that of PEO was set from 15 to 35wt%. Morphological features were observed by SEM image and measurement of porosity and cellular responses were tested before and after extracting PEO from the hybrid scaffolds by immersing the scaffolds into distilled water. The diameter of PEO fibers were ranged from 200nm to 500nm. The lower concentration of PEO tended to show beads. The porosity of the scaffolds after extracting PEO was highly increased with higher concentration of PEO as expected. Also, higher proliferation rate of smooth muscle cells was observed at higher concentration of PEO than at the lower concentration and without PEO. As conclusions, this dual electrospinning technique combined with PU and PEO is expected to overcome the current barrier of cell penetration by providing more space for cells to proliferation.

• 한국조경학회지
• /
• 제34권4호
• /
• pp.84-95
• /
• 2006

This study begins by examining the reason for the lack of urban planning that takes the water cycle into consideration. While there are institutions that support environmentally friendly development or smooth water circulation, these designs are not reflected in planning nor in the real world. After reviewing foreign case studies, policy suggestions and possible policy implications for Korea are derived. In Korea, there is not a sufficient level of relevant laws or institutions systematically established to make it possible to deal with rainwater in a decentralized way. Instead, facility standards or guidelines are considered separately for the control of water and for preventing natural disasters. And even though an environmentally friendly approach is stipulated in relevant laws in terms of spatial planning, there are no planning systems or implementation tools to actualize this kind of approach. The factors that make decentralized rainwater management possible in urban planning are analyzed based on the case study of Germany. Germany requires developers to plan in order to achieve ecological urban development. In addition, as a detailed implementation tool to promote conservation of the water cycle, the law provides for various kinds of measures such as restrictions on the proportion of impervious surface area according to the use of the land, required compensation measures for environmental degradation following development, introduction of a fee for rainwater runoff and the establishment of ecological landscape planning. The actual reason these measures can be implemented however is the provision of planning guidelines and design criteria for rainwater utilization, absorption and containment, and the construction of a database for various environmental information.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.63-67
• /
• 2006

The characteristics of the wet-etching of ZnO thin films were investigated using hydrochloric and phosphoric acid solutions as etchants. The etch rate of ZnO films, using highly diluted hydrochloric acid solutions at a concentration of 0.25% in deionized water, was determined to be about 120 nm/min, and linearly increased with increasing the acid concentration, resulting in $1.17{\mu}m/min$ when a 2% HCl solution was used. The surface of ZnO etched by an HCl solution, observed by scanning electron microscopy, showed a rough morphology with a high density of hexagonal pyramids or cones with sidewall angles of about ${\sim}45^{\circ}C$. Moreover, the sidewall angles of the masked area were similar to those of the pyramids on the surface. In comparison, the surface of ZnO etched by a phosphoric acid had a smooth surface morphology. The origin of this difference is from the very initial stage of etching, indicating that the etch-mechanism is different for each solution. Furthermore, when $H_3PO_4$ was added to the HCl aqueous solution, the morphology of the etched surface was greatly enhanced and the sidewall angle was also increased to about $65^{\circ}C$.