• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.389-399
• /
• 1996

Remineralization of acid-etched enamel across the time has been one of the curiosities in the context of the orthodontic biomechanics(Arends J. et al., IRL Press, 1, 1985), nevertheless, is so far controversial. It was the aim of this study to observe the remineralization patterns of acid-etched enamel across the time and whether the existence of fluoride might carry out any modifications. The intact buccal surfaces of the first bicuspids which was extracted for orthodontic treatment were ground smooth, and etched with a 38w/w% phosphoric acid for 60 seconds, The surface was observed by the scanning electron microscope and surface microhardness was measured after immersion in the fluoride or non-fluoride containing remineralizing solution for 0 hour, 12 hours, 1 day, 3 days, 7 days, 14 days, 28 days, and 42 days. The following results and conclusions were drawn; 1. Surface microhardness increased in both fluoride containing and non-fluoride containing solution group with time lapse. 2. In fluoride containing solution group, the surface microhardness sharply increased at the 12 hours group, on the other hand, surface microhardness increased at 3 days in non-fluoride containing solution group. 3. The difference in microhardness value between two groups manifested gradual decrease. 4. Scanning electron microphotographs disclosed that the fluoride containing solution group generated spiculate sub-stances in the 12 hours group, which was increased in number and size with time lapse. 7 days later, spherical composure was began to be produced, The spiculate substances so much increased in number that the etched enamel surface looked like flat in 42 days. 5. In non fluoride-containing solution group, there was no surface change at 42 days, perceivable in scanning electron microphotographs which could be defined as remineralization though the surface was a little rougher than the incipient etched surface. These results demonstrate that the action of the fluoride is exceedingly pertinent in the remineralization of acid-etched enamel and the remineralization process goes uninterruptedly with time lapse.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.7 no.2
• /
• pp.186-196
• /
• 2004

Purpose: Autoimmune hepatitis is a chronic inflammatory liver disease with unknown cause that is characterized by liver histology, circulating autoantibodies and increased levels of immunoglobulin G. Only sporadic reports are available on autoimmune hepatitis in children. The aim of this study was to evaluate the clinical, biochemical, and histological features, and the long-term outcome of autoimmune hepatitis in Korean children. Methods: We reviewed the medical records of 14 children diagnosed as having autoimmune hepatitis at Seoul National University Children's Hospital from 1990 to 2004, and analyzed clinical, biochemical, and histological features, and clinical outcomes. Results: Mean age at diagnosis was 9 years and 11 of the 14 children were female. Six children presented with acute hepatitis-like manifestations. Jaundice and fatigue were the most common symptoms. Other autoimmune diseases accompanied in 6 children. Anti-nuclear antibody was detected in 13 patients and anti-smooth muscle antibody was positive in 8. All 14 patients were type 1 autoimmune hepatitis. The main histologic findings were interface hepatitis, rosette formation, and cirrhosis. Clinical and biochemical features were improved in six patients treated with ursodeoxycholic acid. Eight patients were treated with corticosteroid alone or in combination with azathioprine and five of them are in biochemical remission. Conclusion: Autoimmune hepatitis is an inflammatory liver disease, which has a favorable long-term outcome if it is diagnosed and treated promptly. Therefore, autoimmune hepatitis should be suspected in children with chronic hepatitis of unknown etiology, especially in female patients who show hypergammaglobulinemia or some clinical features of autoimmune disease.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.1
• /
• pp.130-150
• /
• 2018

Technology valuation refers to the act, procedures, or techniques in evaluating certain technology and its value for commercialization. For this purpose, deadlines and process plans are established based on valuation goals such as technology transfer, investment and financing, investment in kind, and strategy establishment. The technology valuation process involves analyzing and evaluating technology performance, rights, marketability, and business value technology, as well as calculating the monetary value of technology modules based on the results. Analysis and evaluation of each module is performed by a team of experts having knowledge of specific technology. Valuation of technologies is conducted as independent projects by project managers (PM) who integrate and manage modules; they must have expertise in systematic performance of task support and management to ensure objectivity and reliability. Furthermore, the valuation team comprises expert stakeholders having knowledge about each module due to the nature of technology valuation. For smooth knowledge sharing in technology and valuation procedures, communication skills and roles of PMs supporting and managing the valuation are important. Primarily, PMs must resolve conflicts between evaluators participating in different tasks, evaluators and evaluatees, and technology holders and receivers. This study examines technology valuation for four conflicts occurring frequently among stakeholders providing valuation support to PMs, and seeks resolutions. The conflicts and resolutions discussed in this study may lead to more specialized roles of PMs in technology valuation and project management, as well as systemized valuation support and management plans.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.284-284
• /
• 2016

Topological insulator (TI) is a bulk-insulating material with topologically protected Dirac surface states in the band gap. In particular, $Bi_2Se_3$ attracted great attention as a model three-dimensional TI due to its simple electronic structure of the surface states in a relatively large band gap (~0.3 eV). However, experimental efforts using $Bi_2Se_3$ have been difficult due to the abundance of structural defects, which frequently results in the bulk conduction being dominant over the surface conduction in transport due to the bulk doping effects of the defect sites. One promising approach in avoiding this problem is to reduce the structural defects by heteroepitaxially grow $Bi_2Se_3$ on a substrate with a compatible lattice structure, while also preventing surface degradation by encapsulating the pristine interface between $Bi_2Se_3$ and the substrate in a clean growth environment. A particularly promising choice of substrate for the heteroepitaxial growth is hexagonal boron nitride (h-BN), which has the same two-dimensional (2D) van der Waals (vdW) layered structure and hexagonal lattice symmetry as $Bi_2Se_3$. Moreover, since h-BN is a dielectric insulator with a large bandgap energy of 5.97 eV and chemically inert surfaces, it is well suited as a substrate for high mobility electronic transport studies of vdW material systems. Here we report the heteroepitaxial growth and characterization of high quality topological insulator $Bi_2Se_3$ thin films prepared on h-BN layers. Especially, we used molecular beam epitaxy to achieve high quality TI thin films with extremely low defect concentrations and an ideal interface between the films and substrates. To optimize the morphology and microstructural quality of the films, a two-step growth was performed on h-BN layers transferred on transmission electron microscopy (TEM) compatible substrates. The resulting $Bi_2Se_3$ thin films were highly crystalline with atomically smooth terraces over a large area, and the $Bi_2Se_3$ and h-BN exhibited a clear heteroepitaxial relationship with an atomically abrupt and clean interface, as examined by high-resolution TEM. Magnetotransport characterizations revealed that this interface supports a high quality topological surface state devoid of bulk contribution, as evidenced by Hall, Shubnikov-de Haas, and weak anti-localization measurements. We believe that the experimental scheme demonstrated in this talk can serve as a promising method for the preparation of high quality TI thin films as well as many other heterostructures based on 2D vdW layered materials.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.95-106
• /
• 1998

To reduce the environmental contamination and to utilize fly ash massively produced from the coal power plant every year, we synthesized the artificial zeolite using fly ash treated with alkaline, and then analyzed the mineralogical and morphological properties by X-ray, IR, and SEM. The amount of $NH_4{^+}$, $K^+$, and $H_2PO_4{^-}$ adsorbed by the fly ash and the artificial zeolite were determined with reaction time, amount of adsorbate used, ion concentrations. The results obtained from the pot experiments packed with the top soil, amended with granulated artificial zeolite which was made by treatment of 4% polyvinylalcohol, showed that CEC of the artificial zeolite was $257.7cmol^+kg^{-1}$, that was almost 36 times greater than that of fly ash. The ratio of $SiO_2/Al_2O_3$ decreased but the amount of Na increased. The physico-chemical properties analyzed by X-ray, IT, and SEM represented that the artificial zeolite synthesized had a similar morphological structure to that of the natural zeolite. The structures of the artificial zeolite had a significantly enlarged surface having a lot of pores, while the fly ash looked like spherical smooth shape with having not pores on the surface. Thus, the artificial zeolite was successfully synthesized. The results of adsorption isotherms of fly ash and artificial zeolite showed that the amount of $NH_4{^+}$, $K^+$, and $H_2PO_4{^-}$ adsorbed increased as the equilibrium concentration increased, while $NH_4{^+}$ was strongly adsorbed on the surface of fly ash and artificial zeolite than that of $K^+$. The most distinctive growth of Chinese cabbage was found from the top soil(NPK + soils + 20% of granulated artificial zeolite + 5% of compost). Therefore, we concluded that one of the most effective methods to effectively recycle a fly ash was to make the artificial zeolite as we did in this experiment.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.2
• /
• pp.1-11
• /
• 2015

This study sheds light on a pond design process which is a core facility of Hwaseol-dang in Muan, the Jeonnam. The plasticity of the pond was analyzed and interpreted for the design process using methods such as "literature search, interview, site visits, aerial pictures, aerial photographing, drawing figures of configuration plane via measurements, internet search, etc.", to trace the developing process of the design and the implications therein. The study results being centered on the developing process of the pond design are summarized herein below. The position of the Hwaseol-dang, being formed on a low hill having low competence as a place for a pavilion, draws more attention regarding its implications from the aspect of inner design. The pond Hwaseol-dang is in a rectangular shape of 1 : 1.2 ratio, in which the depth is a bit higher on the pond edge of the Hwaseol-dang thus being slanted, and Crape Myrtle, which is not known whether introduced during the formation of the pond, is cultivated on the island in the center widespread toward the southeast region. The planar design of the pond is interpreted as "rectangular pond" but it has a smooth half-moon shape where a part is excluded to remove edge. In particular, the three islands in rectangular pond, due to the narrow area, put one island and two half-moon-shaped islands in juxtaposition, and thus, although only being one island, resultantly exhibits the existence effect of proliferated three islands. This is allegedly due to the intentional formation aiming at the effect of hybrid while minimizing the overlap due to merging and adding from the aspect of constituting a design. Furthermore, the pond Hwaseol-dang is extended northwest along with Hwaseol-dang, and also the island in the center is thought to additionally have one or two, but the widespread phenomenon of the island in the center appears to consider the effect of "sit view on the floor of the pavilion of Hwaseol-dang". Considering that even a few examples of ponds having the three islands among the private house gardens in the nation are all curved ponds, the characteristics of the rectangular Hwaseol-dang pond establishing the garden effect of the three islands by modifying the one island in rectangular pond is highly notable. Considering that the three islands of "Yeongju, Bangjang, and Bongrae" is the original shape of the pond garden gestating Taoist ideology, as a symbolic design of a pond, it is regarded as the characteristics of the pond shape in Jeonnam area, and the so-called three treasures "Hwaseol-dang, Camellia, and oddly shaped stones, etc." are concentrated as the symbolism of Hwaseol-dang pond.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.535-549
• /
• 1999

The Purposes of this study were to investigate the initial tissue changes on the teeth and surrounding tissues under contraction and intrusive force by contraction UTA. A control and experimental dogs, 10-months in age, were studied. Contraction and intrusive force(60gm) were applied at upper four incisors by contraction UTA. Experimental dogs were sacrificed at 2 weeks and 4 weeks after force application, respectively. In this study, 2 experimental groups were designed by the duration of force applied(E1, E2). The specimens were taken around the upper first and second incisor in each groups and were prepared for the H-E and MT stain for light microscopic observation. From the results of the study, the following conclusions may be drown. : 1. In control group, the periodontal ligament width was constant from apical third to cervical third of the root and periodontal fiber arrangement was horizontal or oblique in cervical third, oblique in middle third and apical third. In alveolar bond, smooth appearance was shown with osteoblast. 2. In experimental group 1, in proportion to force was concentrated at labial middle third and apical third of root of the upper first and second incisors, root of these tooth tipped labially and intruded at a time. 3. In experimental group 2, periodontal ligament width and arrangement was similar to control and observed strong calcified response at the labial middle third of root. But, alveolar bond resorption and cementum resorption were as before seen at labial middle third and apical third of root that force was concentrated.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.191-202
• /
• 2007

In these days, open signboard system is controlled by administrative policy and law, but there is no consideration for different types of building. As such, this study aims to propose planning criteria for streetside commercial buildings, such as elevation and mass design of buildings, layout of signboard attached to the building elevation with consideration for streetscape. In mass planning for streetside commercial buildings, the building type with front open space keeps lower open signboard density than the building type directly leading to the street. It is desirable that open signboard of lower floor part is attached by a horizontal type, open signboard of low medium floor part by a projected vertical type, open signboard of high medium floor part and roof part with a minumum attachment of open signboard. As for elevation planning relative to open signboard, it is desirable that an irregular wall type is more useful than a regular wall type to control open signboard. And in all cases, horizontal element facade has a handicap to control the quantity of signboard. If the building has a corner, the piloti should be used in the corner of lower story for smooth circulation of pedestrians and emphasizing the transparency of elevation. Specially, in the case of a round corner, the corner should be emphasized by the composition of high transparent mass.

• The Korean Journal of Pharmacology
• /
• v.16 no.2 s.27
• /
• pp.45-53
• /
• 1980

Lipid peroxidation in vitro has been identified as a basic deteriorative reaction in cellular mechanism of aging processes, such as air pollution oxidant damage to cell and to the lung, chlorinated hydrocarbon hepatotoxicity. Many experimental evidences were reported by several investigators that lipid peroxidation could be one of the principle causes for the hepatotoxicity produced by $CCl_4$. It is now reasonably established that $CCl_4$ is activated to a free radical in vivo, that lipid peroxidation occurs very quickly in microsomes prepared from damaged livers, that the peroxidation is associated with loss of enzyme activity of microsomes, and that various antioxidants can protect animals against the hepatotoxic effect of $CCl_4$. Recent studies have drawn attention to some other feature of microsomal lipid peroxidation. Incubation of liver microsomes in the presence of NADPH has led to a loss of cytochrome $P_{450}$. However, the presence of an antioxidant prevented lipid peroxidation and preserved cytochrome $P_{450}$. Decrease of cytochrome $P_{450}$ in microsomes under in vitro incubation can be enhanced by $CCl_4 and these changes were parallel to a loss of microsomal polyunsaturated fatty acid and formation of malonaldehyde. The primary purpose of this experiment was to study the effect of riboflavin tetrabutylate on lipid peroxidation, specially, the relationship between lipid peroxidation and drug metabolizing enzyme system which is located in smooth endoplasmic recticulum as well as the effect of ritoflavin tetrabutylate on drug metabolizing enzyme system of animal treated with $CCl_4$. Albino rats were used for experimental animal. In order to induce drug metabolizing enzyme system, phenobarbital was injected intraperitoneally. $CCl_$ and riboflavin tetrabutylate were given intraperitoneally as solution in olive oil. Microsomal fraction was isolated from liver of animals and TBA value as well as the activity of drug metabolizing enzyme were measured in the microsomal fractions. The results are summerized as following. 1) The secobarbital induced sleeping time of $CCl_4$ treated rat was about 2 times longer than that of the control group. However, the pretreatment with riboflavin tetrabutylate inhibited completely the lengthened sleeping time due to $CCl_4$ treatment. Furthermore TBA value was significantly increased in $CCl_4$ treated rat in comparison to control group tut the increase of TBA value was prevented by the pretreatment with riboflavin tetrabutylate. On the other hand, the activity of hepatic drug metabolizing enzyme was decreased in $CCl_4$ group, however, the pretreatment with riboflavin tetrabutylate also prevented the decrease of the enzyme activity caused by $CCl_4$. 2) The effect of riboflavin tetrabutylate on TBA value and the activity of drug metabolizing enzyme in vitro was similar to in vivo results. Incubation of liver microsome from rat in the presence of $CCl_4$, $Fe^{++}$, or ascorbic acid has led to the marked increase of TBA value, however, the addition of riboflavin tetrabutylate in incubation mixture prevented significantly the increase of TBA value, suggesting the inhibition of lipid peroxidation. In accordance with TBA value, the activity of drug metabolizing enzyme was inhibited in the presence of $CCl_4$, $Fe^{++}$, ascorbic acid but the addition of riboflavin tetrabutylate protected the loss of the enzyme activity in microsome under in vitro incubation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.45-53
• /
• 2000

Enamel microabrasion is a means by which superficial enamel discoloration is removed using hydrochloric acid and fine pumice. As enamel microabrasion alone may not be sufficient in cases of deeper discoloration, composite resin restoration is recommended in areas where there is remaining discoloration. The purpose of this study was to investigate the effects of different methods and number of applications of enamel microabrasion on the shear bond strength of composite resin to enamel. Untreated control was designated as group 1. 5-second applications of a mixture of 18% HCl and fine pumice were performed 5 and 10 times on groups 2 and 3, respectively. A commercially available mixture of 10% HCl and abrasives(PREMA) was applied using a 10 : 1 gear reduction handpiece 5 and 10 times on groups 4 and 5, respectively, with each application lasting 20 seconds. After etching with 37% phosphoric acid, composite resin was bonded. Thermocycling was performed and shear bond strength was measured. The following results were obtained : 1. Group 2 showed the highest bond strength$(24.36{\pm}3.34)$, while group 3 showed the lowest$(19.35{\pm}3.43)$, Shear bond strength decreased in the following order: 2>4>5>1>3. 2. Group 2 showed bond strength significantly higher compared to groups 1 and 3(p<0.05). 3. There were no significant differences between groups 2 and 3, which had been microabraded using HCl and pumice, and groups 4 and 5, to which PREMA had been applied, when bond strengths were compared(p>0.05). 4. When modes of fracture were examined, adhesive failure was observed in groups 3 and 4, while cohesive failure was observed in groups 1, 2, 3 and 4. Only mixed failures were found group 5. 5. When viewed using a SEM, groups 2 and 3, which had been microabraded using HCl and pumice, showed surface appearances similar to that of enamel etched with phosphoric acid. Groups 4 and 5, treated with PREMA, exhibited a smooth surface similar to that of group 1. All oops showed similar, typical surface characteristics following phosphoric acid etching.