• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.131-149
• /
• 1999

It was found that surface roughness has a first-order effect on the interface shear strength and accordingly it should be accurately quantified if its role is to be properly understood. To quantify the surface topography, first of all, a variety of commonly used surface roughness parameters and profiling methods were reviewed in this study. Based on this review, the normalized roughness parameter. $R_n$(Uesugi and Kishida, 1986), the profile roughness parameter, $R_L$, and the surface roughness parameter, $R_n$(Dove and Frost, 1996), were selected to be appropriate candidates of roughness parameters and the digital image analysis based Optical Profile Microscopy(OPM) method(Dove and Frost, 1996) to be an appropriate profiling method for this study. Using a smooth and three textured HDPE geomembranes which encompass the range of textures and texture patterns commonly used, a series of roughness measurements on virgin and previously used geomembranes were performed. The results showed that both $R_L\; and\; R_S$ values appropriately reflect the degree of texturing for the geomembranes used in this study, however, $R_n$ value showed limited ranges of variation which may not be sufficient to permit distinction between roughness values for certain conditions. The results of this study will be extended to the investigation of the influence of surface roughness on interface strength in future study.

• 대한공업교육학회지
• /
• v.41 no.2
• /
• pp.24-47
• /
• 2016

The purpose of the this study is to analyze consulting demands in vocational education and training (VET) high schools participating the apprenticeship system in Korea. The results of the study are as follows. Firstly, there are 9 sections of consulting that teachers in charge of apprenticeship program in VET high schools demanded. Especially, the demands for the consulting that related with 'student evaluation', 'apprenticeship program development and organization planning of schools' curriculum', 'selection and management of enterprises', 'organization of apprentices classes and student management', 'teaching & learning activities and textbook development' were relatively high. Secondly, there were differences in demands of consulting by VET high schools' current management status. By the type of organization, demands for consulting of both 'training center in main school' of organization and 'training center in common' of organization were higher than 'independent school' of organization generally. By the type of apprenticeship program hours, demands for consulting of both 'above 1400 hours' and '1200 ~ 1400 hours' were higher than 'less than 1200 hours' generally. By the type of OJT operation, demands for consulting of 'a type of OJT that is operated in long term(more than 2 weeks)' were higher than 'a type of OJT that is operated weekly' generally. As a result from above, there are some pre-requisites for the stable operations of VET high schools. 1) The apprenticeship program shall be developed not to interrupt school's regular curriculum. 2) For the smooth management between apprenticeship program and school curriculum, the academic calender has to be established so as the type of OJT operation. 3) The cooperation among the participating schools in part of the organization is unavoidable.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.155-187
• /
• 1992

The Korean economy has sustained high growth rate for almost three decades, that have been associated with the rapid expansion of manufacturing industries. In the beginning stage of development, the high growth of the Korean economy has been based on improvements in productivity obtained by the economies of scale. In that period, the improvements in productivity could be secured by the economies of scale in the export-oriented industries which are the labor- and material-intensive industries. In the latter half of the 1980s, the Korean economy went through rapid transition. Now Korea is at another juncture in its development process, where economic restructuring is critical to sustain high growth. However, economic restructuring in the 1990s call for much more concerted effort than before, since changes in internal and external conditions have profoundly altered the environment for economic development. If Korea is to sustain high growth in the 1990s, it has to promote balanced economic and social development in coordination with the smooth facilitation of industrial restructuring. There are no inherent conflicts among the issues involved, so they can be resolved by restructuring the economy to facilitate, in a global context, the development of knowledge- and technology-intensive activities and to ensure that the benefts of growth are reflected of qualitative improvements in national living standards. In this paper, we examined a scenario of structural changes using a mid- and long-term multisector model, in order to understand the conditions needed for realizing the growth potential. This examination explains the important features of the development course and policy directions that will help sustain high growth in the 1990s.

• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.19-33
• /
• 2003

The objective of this study was to evaluate the effects of crumb rubber recycled from used tires as a soil incorporation and topdressing materials on a trafficked Korean lawngrass‘Zenith’(Zoysia japonica). In Exp 1, incorporation treatments included three particle sizes (PS: coarse =4∼6.35 mm, medium =2∼4 mm, and One : less than 2 mm in diameter) and two incorporation rate (IR: 10 and 20%). Wear treatments were applied 30 passes per day by compactor weights being 60 kg with soccer shoes. Topdressing treatments included three PS and two topdressing depth (TD: 5 and 10 mm). Wear treatments were the same as described in Exp 1. In Exp 1, the treatment with medium PS+IR 20 resulted in the tendency to have high total clipping yield. There was no significant difference in clipping yield, turfgrass visual color, coverage, and root length among the treatments. Compared to control, tissue Zn levels increased about 6.5-fold by the treatments. The treatment with fine PS +IR 20 caused a less peak deceleration than coarse PS +IR 10. Total porosity, air-filled porosity, and capillary porosity increased with fine PS +IR 20. In Exp 2, compared to controls, however, there was a difference in turfgrass visual color after the termination of traffic treatment. There was no difference in root length. The treatment with fine PS + TD 10 resulted in the highest total clipping yield. As a result of soil physical analysis, soil penetration resistance was reduced by the treatments. The treatment with coarse PS resulted in a less peak deceleration than fine PS. In conclusion, turfgrass growth was increased by crumb rubber incorporation which enhanced soil physical properties. The crumb rubber topdressing was able to cushion the crown tissue area while still providing a smooth and uniform surface, improve overall turfgrass quality, and reduce compaction.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.2
• /
• pp.126-133
• /
• 2010

Purpose : The study was to evaluate the localization of the abnormal gyral and sulcal patterns obtained by means of brain surface rendering imaging. Materials and Methods : Nineteen patients with cortical dysplasia who underwent brain surface rendering MR imaging were included in this study. We acquired MP-RAGE sequence and created the 3-D surface rendering MR images by using $VoxelPlus^{(R)}$. Anatomical locations and configurations of abnormal gyri and sulci were reviewed. Results : Abnormal gyral and sulcal patterns were seen 18 in 19 patients. The configuration and orientation of affected gyri and sulci were clearly evaluated in the brain surface rendering images. In a lissencephaly, the a cortex was not delineated and showed markedly thick and smooth gyral pattern. In a schizencephaly, there were wheel shaped broad gyral pattern around the cleft. In a hemimegalencephaly, an affected hemisphere were enlarged and displayed thick and wide gyral pattern. In CBPS, the insular cortex was exposed and the gyri of the lesion were thickened. In focal cortical dysplasia, there were irregular serrated or thick and enlarged gyri. Conclusion : Brain surface rendering MR imaging is useful for the evaluation of a detailed gyral pattern and accurate involvement site of abnormal gyri.

• Geophysics and Geophysical Exploration
• /
• v.19 no.2
• /
• pp.76-83
• /
• 2016

Migration image can be distorted due to reflected waves in the source and receiver wavefields when discontinuities of input velocity model exist in seismic imaging. To remove reflected waves coming from layer interfaces, it is a common practice to smooth the velocity model for migration. If the velocity model is smoothed, however, the subsurface image can be distorted because the velocity changes around interfaces. In this paper, we attempt to minimize the distortion by reducing reflection energy in the source and receiver wavefields through acoustic impedance homogenization. To make acoustic impedance constant, we define fake density model and use it for migration. When the acoustic impedance is constant over all layers, the reflection coefficient at normal incidence becomes zero and the minimized reflection energy results in the improvement of migration result. To verify our algorithm, we implement the reverse-time migration using cell-based finite-difference method. Through numerical examples, we can note that the migration image is improved at the layer interfaces with high velocity contrast, and it shows the marked improvement particularly in the shallow part.

• Journal of the Korean Magnetics Society
• /
• v.16 no.6
• /
• pp.283-286
• /
• 2006

We have studied the role of ${\alpha}-Al_{2}O_{3}$ buffer layer as a diffusion barrier in the Ba-ferrite/$SiO_{2}$ magnetic thin films for high-density recording media. In the interface of amorphous Ba-ferrite $(1900-{\AA}-thick)/SiO_{2}$ thin film during annealing, the interfacial diffusion started to occur at ${\sim}700^{\circ}C$. As the annealing temperature increased up to $800^{\circ}C$, the interfacial diffusion abruptly proceeded resulting in the high interface roughness and the deterioration of the magnetic properties. In order to control the interfacial diffusion at the high temperature, we introduced ${\alpha}-Al_{2}O_{3}$ buffer layer ($110-{\AA}-thick$) in the interface of Ba-ferrite/$SiO_{2}$ thin film. During the annealing of Ba-ferrite/${\alpha}-Al_{2}O_{3}/SiO_{2}$ thin film even at ${\sim}800^{\circ}C$, the interface was very smooth. The magnetic properties, such as saturation magnetization and intrinsic coercivity, were also enhanced, due to the inhibition of interfacial diffusion by the ${\alpha}-Al_{2}O_{3}$ buffer layer. Our study suggests that the ${\alpha}-Al_{2}O_{3}$ buffer layer act as a useful interfacial diffusion barrier in the Ba-ferrite/$SiO_{2}$ magnetic thin films.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.197-200
• /
• 2004

Sensor and optical properties have become critical features in powder foundation. The flaky barium sulfate powder shows good smooth texture, adhesion and natural looking characteristics. However, it has limitations abilities in UV shielding, hiding and blooming effect. Thus we adopt TiO$_2$ that has excellent hiding power and blooming effect as well as UV shielding ability, but TiO$_2$ has still intrinsic problems in dispersion and texture. To overcome this disadvantages, the barium sulfate/TiO$_2$/dimethicone composite powder was prepared. The flaky barium sulfate powder was coated with TiO$_2$ in nanoscale and followed by coated with dimethicone. When this surface-modified powder was applied for make-up cosmetics, especially in powder foundation, the powder gave powder foundation more good characteristics than the original flaky barium sulfate, Ti02 powder, dimethicone in abovementioned optical and sensory properties. To characterize the distinctive features of this surface-modified powder, we measured its characteristics with UV in vitro tester, hiding powder test method, goniophotometer, consumer panel test and so on.

• The Korea Journal of Herbology
• /
• v.30 no.6
• /
• pp.69-75
• /
• 2015

Objectives : This study was designed to investigate effects of the combination with Korean Red Ginseng (Panax ginseng C.A. Meyer), Gastrodia Rhizoma (Gastrodia elata Blume) and Polygoni Multiflori Radix (Polygonum multiflorum Thunberg) on metabolic disorders including cholesterol and erectile dysfunction in hyperlipidemia rats.Methods : Animals were divided into six groups; Control with normal diet, high fat/cholesterol-diet (HFCD), fluvastatin, Korean Red Ginseng treated (KRG), and the combination treated (Korean Red Ginseng, Gastrodia Rhizoma and Polygoni Multiflori Radix; 1:1:1 for KGP1 and 2:1:1 for KGP2). The experimental groups initially received HFCD for 10 weeks and then treated orally with fluvastatin, KRG, KGP1 and KGP2 during the final 6 weeks. Erectile function was determined by the measurements of intracavernosal pressure (ICP) and maximal arterial pressure (MAP) after electrical stimulation of the cavernosal nerve.Results : KGP2 decreased the level of total cholesterol and LDL cholesterol in the sera of HFCD rats without no changes of body weights. KRG, KGP1 and KGP2 decreased the level of C-reactive protein (CRP) levels except of fluvastatin, synthetic HMG-CoA reductase inhibitor. KRG, KGP1 and KGP2 significantly increased the ICP, ICP/MAP ratio, area under the curve (AUC) compared with those of normal rat. Morphometric analyses showed that KRG, KGP1 and KGP2 increased the volume of smooth muscle and the regular arrangement of collagen fibers in corpus cavernosum of HFCD rats. The penile expression of eNOS was increased by KRG, KGP1 and KGP2.Conclusions : Based on these results, we suggest that the combination with Korean Red Ginseng, Gastrodia Rhizoma and Polygoni Multiflori may improve hyperlipidemia through regulating the lipid profiles and erectile dysfunction in rats.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.12 no.1
• /
• pp.27-33
• /
• 1982

The purpose of this study is to obtain some informations for the differential diagnosis of ameloblastoma from dentigerous cyst by analysis of the radiographic findings of these lesions. The author studied age and sex distribution, the site of the lesion, tooth behavior and several radiographic features of ameloblastoma and dentigerous cyst. The material consisted of 65 patients of ameloblastoma and 37 patients of dentigerous cyst. The results were obtained as followings. 1) The incidence was highest in 2nd decade (29.2%) and total 65 cases consists of 35 males (53.8%) and 30 females (46.2%) in ameloblastoma. 62 cases were found in lower jaw (95.4%) and the highest site of occurence of ameloblastoma was mandibular molar. region 27 cases. (41.5%) 2) In 65 cases of amelobl!!stoma, 18 cases were seen in association with tooth and 15 cases (83.2%) out of those were associated with mandibular molar teeth. Mandibular molar were most frequently involved in dentigerous cyst (11/31 cases, 29.7%). 3) (a) 23 cases (35.3%) of tooth resorption were found in ameloblastoma and 11 cases (29.7%) of tooth resorption were found in dentigerous cyst. (b) 15 cases (23.1%) of tooth migration were found in ameloblastoma and 10 cases (27.0%) of tooth migration were found in dentigerous cyst. 4) Several radiographic features. (a) Monolocular type ameloblastoma were seen in 23 cases (35.4) and multilocular type of ameloblastoma were seen in 42 cases (64.6%). Monolocular type of dentigerous cyst were seen in 33 cases (89.2%) and multilocular type was seen in 4 cases. (b) Monolocular type ameloblastoma showed 20 cases (87.0%) of scalloped border but 32 cases (97.0%) of dentigerous cyst showed smooth border. (c) 34 cases (81.0%) of ameloblastoma showed honey-comb appearance, soap-bubble appearance or mixed appearance. but all 4 cases of dentigerous cyst showed multicystic appearance. (d) 12 cases (52.2%) of monolocular type ameloblastoma showed slightly increased radiopacity in surrounding bone, and 22 cases (66.7%) of monolocular type dentigerous cyst showed sharp osteosclerotic border. 27 cases (64.3%) of multilocular type ameloblastoma and 3 cases (75.0%) of multilocular type dentigerous cyst showed no changes in surrounding bone.