• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.1-7
• /
• 2006

Nowadays, out of other transmission parts, the sleeve is getting more and more important part for exact and smooth shifting from gear ratio change whenever drivers are needed. To exact and smooth shifting when drivers are needed, all the parts connected with gear shifting should be machined exactly and having dimensions designers are intended. Especially, in case of the sleeve that the most important functional part to shift from gear ratio change that drivers are intended, it needs high precision grade and quality in both sides runout and outer dia runout as well as inner spline small dia & large dia. Because it's assembled with the synchro hub spline and shifted directly with the mating cone. So, it should be applied the hear treatment(hereinafter referred to H.T.M.T) to prevent the friction and percussion loss from shifting with mating cone. At this time, the deformation problems are raised from almost H.T.M.T. process and it makes the inferior part.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.156-161
• /
• 2011

The present study introduces a novel wet etching technique for nanostructure fabrications which usually requires low surface roughness. Using the current method, acquired profiles were smooth even in the nanoscale, which cannot be easily achieved with conventional wet or dry etching methods. As one of the most popular single crystal silicon etchant, potassium hydroxide (KOH) solution was used as a base solvent and two additives, antimony trioxide (Sb2O3) and ethyl alcohol were employed in. Four experimental parameters, concentrations of KOH, Sb2O3, and ethyl alcohol and temperature were optimized at 60 wt.%, 0.003 wt.%, 10 v/v%, and $23^{\circ}C$, respectively. Effects of additives in KOH solution were investigated on the profiles in both (110) and (111) planes of single crystal silicon wafer. The preliminary results show that additives play a critical role to decrease etch rate significantly down to ~2 nm/min resulting in smooth side wall profiles on (111) plane and enhanced surface roughness.

• Journal of applied mathematics & informatics
• /
• v.28 no.1_2
• /
• pp.163-173
• /
• 2010

We consider the system $$\{{{-{\Delta}_pu\;=\;{\lambda}f(\upsilon),\;\;\;x\;{\in}\;{\Omega}, \atop -{\Delta}_q{\upsilon}\;=\;{\mu}g(u),\;\;\;x\;{\in}\;{\Omega},} \atop u\;=\;\upsilon\;=\;0,\;\;\;x\;{\in}\;{\partial\Omega},}$$ where ${\Delta}_pu\;=\;div(|{\nabla}_u|^{p-2}{\nabla}_u)$, ${\Delta}_{q{\upsilon}}\;=\;div(|{\nabla}_{\upsilon}|^{q-2}{\nabla}_{\upsilon})$, p, $q\;{\geq}\;2$, $\Omega$ is a ball in $\mathbf{R}^N$ with a smooth boundary $\partial\Omega$, $N\;{\geq}\;1$, $\lambda$, $\mu$ are positive parameters, and f, g are smooth functions that are negative at the origin and f(x) ~ $x^m$ g(x) ~ $x^n$ for x large for some m, $n\;{\geq}\;0$ with mn < (p - 1)(q - 1). We establish the existence and uniqueness of positive radial solutions when the parameters $\lambda$ and $\mu$ are large.

• Industrial Engineering and Management Systems
• /
• v.16 no.1
• /
• pp.80-91
• /
• 2017

Multiple prior studies stress that continued Kaizen activity is conducive to building and maintaining competitive advantages of manufacturing companies. Meanwhile, it remains unclear as to what kind of management factors may exert impact on sustainment of Kaizen activity. This paper discusses a study conducted on the cases of two manufacturing lines, where such activity has been continued for more than ten years. At first, it was discovered that study period was divided into different periods. It was also found out that 'standstill conditions' which prevent smooth progress of activity exist in many periods, and that such conditions are hard to avoid. The study went on to categorize progress of activity in each period into different patterns, including at which points standstill conditions occurred, thereby, circumstances of standstill conditions were made clear. This paper verified a detailed process of Kaizen activity development in each period and the relationship between that detailed process and points of occurrence of standstill conditions. Thought was also given to factors and actions for smooth development, and effects brought about by overcoming such challenges. Lastly, consideration was given to the future perspectives of the study for elucidating how better Kaizen activity may be managed for continuation.

• The Journal of Internal Korean Medicine
• /
• v.25 no.2
• /
• pp.238-244
• /
• 2004

Objective : This study is intended to investigate whether the two oriental medical prescriptions, CheongGeumGangHwa-tang(CGGH) and GwaRuJiSil-tang(GRJS), significantly affect mucin release from cultured hamster tracheal surface epithelial(HTSE) cells. Materials and Methods : Confluent HTSE cells were metabolically radio labeled with 3H-glucosamine for 24 hrs and chased for 30 min in the presence of CGGH or GRJS to assess the effect of each agent on 3H-mucin release. Possible cytotoxicities of each agent were assessed by measuring lactate dehydrogenase(LDH) release. Also, the effects of CGGH and GRJS on contractility of isolated tracheal smooth muscle were investigated. Results : (1) CGGH and GRJS significantly increased mucin release from cultured HTSE cells, without cytotoxicity : (2) CGGH and GRJS did not affect contractility of isolated tracheal smooth muscle. Conclusions : These results suggest that the effects of CGGH and GRJS should be further investigated, and that it would be gainful to invesigate, from among oriental medical prescriptions, what novel agents have these mild expectorant effects on mucin secretion from airway goblet cells.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05a
• /
• pp.3-16
• /
• 2002

This article describes some of the recent and on-going research developments of the author at Colorado State University. Advances in the field of sedimentation and river mechanics include basic research and computer modeling on several topics. Only a few selected topics are considered here: (1) analytical determination of velocity profiles, shear stress and sediment concentration profiles in smooth open channels; (2) experiments on bedload particle velocity in smooth and rough channels; (3) field measurements of sediment transport by size fractions in curved flumes. In terms of computer modeling, significant advances have been achieved in: (1) flashflood simulation with raster-based GIOS and radar precipitation data; and (2) physically-based computer modeling of sediment transport at the watershed scale with CASC2D-SED. Field applications, measurements and analysis of hydraulic geometry and sediment transport has been applied to: (1) gravel-bed transport measurements in a cobble-bed stream at Little Granite Creek, Wyoming; (2) sand and gravel transport by size fraction in the sharp meander bends of Fall River, Colorado; (3) changes in sand dune geometry and resistance to flow during major floods of the Rhine River in the Netherlands; (4) changes in hydraulic geometry of the Rio Grande downstream of Cochiti Dam, New Mexico; and (5) analysis of the influence of water temperature and the Coriolis force on flow velocity and sediment transport of the Lower Mississippi River in Louisiana. Recent developments also include two textbooks on "Erosion and Sedimentation" and "River Mechanics" by the author and state-of-the-art papers in the ASCE Journal of Hydraulic Engineering.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2014

It is not easy to analyze the behavior of a structural body composed of particles such as rocks using the finite element method facilitating typical element meshes because we cannot ignore the interactions among particles. In the study, we investigated the applicability of smooth particle hydrodynamics (SPH) element method for collision analysis of rock-berm by comparison with the conventional Lagrange method. As the result, SPH technique is expected to be capable of realistic simulation under collision analysis of material composed of particles.

• The Korean Journal of Physiology and Pharmacology
• /
• v.5 no.2
• /
• pp.147-156
• /
• 2001

It has been proposed that $Ca^{2+}-activated$ K $(K_{Ca})$ channels play an essential role in vascular tone. The alterations of the properties of coronary $K_{Ca}$ channels have not been studied as a possible mechanism for impaired coronary reserve in cardiac hypertrophy. The present studies were carried out to determine the properties of coronary $K_{Ca}$ channels in normal and hypertrophied hearts. These channels were measured from rabbit coronary smooth muscle cells using a patch clamp technique. The main findings of the present study are as follows: (1) the unitary current amplitudes and the slope conductance of coronary $K_{Ca}$ channels were decreased without changes of the channel kinetics in isoproterenol-induced cardiac hypertrophy; (2) the sensitivity of coronary $K_{Ca}$ channels to the changes of intracellular concentration of $Ca^{2+}$ was reduced in isoproterenol-induced cardiac hypertrophy. From above results, we suggest for the first time that the alteration of $K_{Ca}$ channels are involved in impaired coronary reserve in isoproterenol-induced cardiac hypertrophy.

• The Korean Journal of Physiology and Pharmacology
• /
• v.13 no.4
• /
• pp.309-313
• /
• 2009

Spontaneous hypertensive rats (SHR) are an established model of genetic hypertension. Vascular smooth muscle cells (VSMC) from SHR proliferate faster than those of control rats (Wistar-Kyoto rats; WKY). We tested the hypothesis that induction of heme oxygenase (HO)-1 induced by aprotinin inhibits VSMC proliferation through cell cycle arrest in hypertensive rats. Aprotinin treatment inhibited VSMC proliferation in SHR more than in normotensive rats. These inhibitory effects were associated with cell cycle arrest in the G1 phase. Tin protoporphyrin IX (SnPPIX) reversed the anti-proliferative effect of aprotinin in VSMC from SHR. The level of cyclin D was higher in VSMC of SHR than those of WKY. Aprotinin treatment downregulated the cell cycle regulator, cyclin D, but upregulated the cyclin-dependent kinase inhibitor, p21, in VSMC of SHR. Aprotinin induced HO-1 in VSMC of SHR, but not in those of control rats. Furthermore, aprotinin-induced HO-1 inhibited VSMC proliferation of SHR. Consistently, VSMC proliferation in SHR was significantly inhibited by transfection with the HO-1 gene. These results indicate that induction of HO-1 by aprotinin inhibits VSMC proliferation through cell cycle arrest in hypertensive rats.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1357-1368
• /
• 2017

The lack of controllability over the wind causes fluctuations in the output power of the wind generators (WGs) located at the wind farms. Distribution Static Compensator (DSTATCOM) equipped with Battery Energy Storage System (BESS) can significantly smooth these fluctuations by injecting or absorbing appropriate amount of active power, thus, controlling the power flow of WGs. But because of the component aging and thermal drift, its harmonic filter parameters vary, resulting in performance degradation. In this paper, Quantitative Feedback Theory (QFT) is used as a robust control scheme in order to deactivate the effects of filter parameters variations on the wind power generation power smoothing performance. The proposed robust control strategy of the DSTATCOM is successfully applied to a microgrid, including WGs. The simulation results obviously show that the proposed control technique can effectively smooth the fluctuations in the wind turbines' (WT) output power caused by wind speed variations; taking into account the filter parameters variations (structural parameter uncertainties).