• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.848-853
• /
• 1994

This paper describes the concept and basic technique of measuring torsional operational deflection shapes using a laser-based torsional vibration meter, a dual-channel FFT analyzer and operational deflection shapes software running on a PC. Torsional Operational Deflection Shapes (TODS) is defined similar to ODS (Operational Deflection Shapes), with the exception the TODS designates the operational deflection shapes of structures vibrating in a rotational, or angular, degree of freedom. Thus the TODS measurements can be applied to rotating shafts and the results of such a measurement are shown. In some cases it may be great benefit to apply order tracking and/or synchronous time domain averaging techniques in order to avoid smearing and reduce noise problems.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.1
• /
• pp.70-76
• /
• 1996

In this paper, we have proposed a band stop filter (BSF) for pre-processing of image sequences before encoding. By pixel-wise temporal filtering of the image sequences using the BSF, the bandwidth and noise of the signal are reduced, while preserving the image quality in view of human visual perceptions. As a result, when compared to the original image sequences, te pre-filtered image sequence requires lower bit-rates for encoding, while there is not much degradation in quality. Also, it has been shown that the proposed BSF causes less smearing and blurring than the conventional recursive low pass filter for bandwidth and noise reductions.

• Journal of Intelligence and Information Systems
• /
• v.12 no.1
• /
• pp.17-31
• /
• 2006

In this paper, passport recognition and face verification methods which can automatically recognize passport codes and discriminate forgery passports to improve efficiency and systematic control of immigration management are proposed. Adjusting the slant is very important for recognition of characters and face verification since slanted passport images can bring various unwanted effects to the recognition of individual codes and faces. Therefore, after smearing the passport image, the longest extracted string of characters is selected. The angle adjustment can be conducted by using the slant of the straight and horizontal line that connects the center of thickness between left and right parts of the string. Extracting passport codes is done by Sobel operator, horizontal smearing, and 8-neighborhood contour tracking algorithm. The string of codes can be transformed into binary format by applying repeating binary method to the area of the extracted passport code strings. The string codes are restored by applying CDM mask to the binary string area and individual codes are extracted by 8-neighborhood contour tracking algerian. The proposed RBF network is applied to the middle layer of RBF network by using the fuzzy logic connection operator and proposing the enhanced fuzzy ART algorithm that dynamically controls the vigilance parameter. The face is authenticated by measuring the similarity between the feature vector of the facial image from the passport and feature vector of the facial image from the database that is constructed with PCA algorithm. After several tests using a forged passport and the passport with slanted images, the proposed method was proven to be effective in recognizing passport codes and verifying facial images.

• Journal of Animal Reproduction and Biotechnology
• /
• v.35 no.3
• /
• pp.232-238
• /
• 2020

This study used adult wistar-based rats to observe the sexual cycle as a morphological characteristic of vaginal epithelial cells by vaginal smearing, and investigated the fetal number through mating with male rats of the same strain. The target animal was a 12 to 13-week-old Wistar-based mature unlighted rat (weight 220 g to 240 g), room temperature 23 ± 2℃, 14 hours artificial lighting (05:00 to 19:00 hours), 10 hours Adapted individuals were used for rearing for at least 2 weeks under the conditions of the darkroom (19:00 to 05:00). The feed was managed for free feeding of pellet feed for animals and water. The vaginal smearing method was used for the experiments by observing the sexual cycle every morning and confirming that the normal sexual cycle of 4 or 5 days was repeated at least 2 cycles or more. As a result, the proestrus was found to have few red blood cells, the cells and nuclei were rather large and round, and many nucleated cells were identified. In the case of the estrus, the cells were large and the nuclei were not stained, and most of the keratinocytes were found. In addition, in the metestrus and diestrus, there were many white blood cells, and it was confirmed that nucleated epithelial cells and keratinocytes were significantly reduced. The pregnancy period was 21 ± 1.8 days, and the number of live births per delivery was 11.9 on average. The number of fetuses on the 8th and 10th days of pregnancy were 15.2 ± 0.4 and 15.4 ± 0.3, respectively. On the contrary, the number of fetuses on the 12th day of pregnancy was 12.9 ± 0.6, which was significantly (p < 0.05) decreased compared to the 10th day of pregnancy, and the number of fetuses was similar until delivery. As a result of investigating the change of body weight according to the birth weight and growth stage after delivery, the birth weight of female and male was 9.2 ± 2.0 g and 9.8 ± 2.5 g, respectively. After that, until the 16th day, the female and the male showed similarly moderate weight gain, and then showed a rapid weight gain until the 21st day of lactation. With reference to the results of this study, it is expected to be used as basic data for determining the mating time of rodents and controlling pregnancy and fetal number.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.491-498
• /
• 2012

Recently, many papers have been proposed in order to improve the OFDM system performance in T-DMB DOCR (Digital On Channel Repeater), by using removing the feedback signal so that the transmitter power can be increased or by using the equalizer to remove ICI. Despite these efforts, however, signal quality at the receiving terminal has not been improved because of constellation smearing in T-DMB DOCR. In this paper, in order to suppress constellation smearing, we propose an effective equalizer algorithm that can improve system performance. We perform adaptive channel estimation and non-coherent decision directed noise cancellation method that can estimate the channel subsequently during data symbols period in the frequency domain. So we can obtain better quality of the signal at the receiving terminal. In order to secure QoS(Quality of Service) required in T-DMB handsets, we evaluate SNR and BER in T-DMB DOCR(Digital On Channel Repeater) and verified by simulation. In this simulation results, this system is satisfied the performance of BER=$10^{-5}$ at less than SNR=14 dB at the receiver after compensation of phase noise -18 dBc.

• Restorative Dentistry and Endodontics
• /
• v.27 no.3
• /
• pp.299-309
• /
• 2002

The purposes of this study were to evaluate the microtensile bond strength of one-step adhesives accord ing to various dentin surface treatments and to observe the interface between resin(Z-100$^{TM}$) and dentin under SEM. In this study forty-five non-caries extracted human molars and three adhesive systems were used ; AlI-Bond 2(AB), One-Up Bond F(OU), AQ-Bond(AQ). ; In Group 1, 2, 3, AB was used and tooth surfaces were treated by smearing(S), ultrasonic cleansing(US), etching(E) respectively. In Group 4. 5, 6, One-Up Bond F was used and tooth surfaces were also treated as the same way above. In Groups 7, 8, 9, AQ Bond was used and tooth surfaces wet$.$e treated as the same way. Each specimen was prepared for microtensile bond testing, and were stored for 24hrs in 37$^{\circ}C$ distilled water. After that, microtensile bond strength for each specimen was measured. Specimens were fabricated to examine the failure patterns of interface between resin and dentin and observed under the SEM. The results were as follows ; 1. The results(mean$\pm$SD) of microtensile test were group 1, 25.69$\pm$4.31MPa; group 2, 40.93$\pm$10.94MPa; group 3, 47.65$\pm$8.85MPa； group 4, 35.98$\pm$9.14MPa； group 5, 39.66$\pm$8.45MPa; group 6, 43.26$\pm$13.01MPa; group 7, 25.07$\pm$4.2MPa；group 8, 30.4$\pm$4.74MPa；group 9, 33.61$\pm$7.88MPa. 2. One-Up Bond F was showed the highest value of 36.98$\pm$9.14MPa in dentin surface treatment with smearing, and there were significant differences to the other groups (p<0.05). 3. All-Bond 2 was showed the highest value of 40.93$\pm$10.94MPa in dentin surface treatment with ultra-sonic cleansing, but was no significant difference to One-Up Bond F(p>0.05) 4. All-Bond 2 was showed the highest value of 47.65$\pm$8.85MPa in dentin surface treatment with etch ing(10%phosphoric acid), and there were significant differences to the other groups(p<0.05). 5. All-Bond 2 was showed the highest value of 47.65$\pm$8.85MPa in dentin surface treatment according to manufacture's directions. but was no significant difference to One-Up Bond F(p>0.05). 6. AQ Bond was skewed the lowest microtensile bond strength with various dentin surface treatment, and the were significant differences to the other groups(p<0.05).

• Journal of Korean Biological Nursing Science
• /
• v.16 no.2
• /
• pp.90-97
• /
• 2014

Purpose: The purpose of this study was to compare the contamination level of uniforms with nasal colonization of Staphylococcus aureus before and after the clinical practice of nursing students. Methods: This study was a survey research, conducting microbial culture by smearing the front surface and the pockets of uniforms, and the nasal cavity both before and after clinical practice on 70 nursing students. For the analysis, descriptive statistics, chi-square test, paired t-test were used for statistical analysis using SPSS 19.0. Results: The contamination level of uniforms increased more significantly after clinical practice on the front surface (p=.008) and pockets (p=.031) than before clinical practice, and Staphylococcus aureus, and Enterobacter aerogenes were detected. Conclusion: Through the results above, it is believed that it is reasonable to do the laundering of clinical uniforms of nursing students once a week. Because it is possible to disseminate disease germs with the contamination of clinical practice uniforms in a hospital environment, it is necessary to offer education for the laundering of uniforms with appropriate management.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2514-2522
• /
• 1994

The mirror surface grinding of carbon fiber reinforced plastics(CFRP) was realized by using the metal bonded super-abrasive micro grain wheel with electrolytic in-process dressing(ELID). The maximum surface roughness $R_{max}$ of CFRP which was obtained with #6,000 wheel, was 0.65 $\mu{m}$, which was rougher surface finish compared to those of hard and brittle materials with the same mesh number wheel with ELID. The grinding performance was much dependent on the grinding direction and the best surface roughness was obtained at $90^{\circ}C$ grinding with fiber direction. The spark-out effect on the surface improvement was significant when smaller mesh number grinding wheels were used. From the surface observations of CFRP with scanning electron microscope(SEM) and Auger electron spectroscopy(AES), it was found that the mirror surface grinding of CFRP was generated by the homogenization due to carbonization of the ground surface and smearing of chips composed of the carbon fiber and carbonized epoxy resin into the ground surface.

• Korean Journal of Environmental Biology
• /
• v.20 no.1
• /
• pp.20-24
• /
• 2002

We have from water samples of Kwalim, Dochang, and Mulwang reservoirs in Kyonggi-Do, where cyanobacteria blooming occurred. Isolated microbes which have lytic activity for cyanobacteria. Water samples were smeared on the Anabaena cylindrica lawn and incubated in light chamber at $28^\circ{C}$, under 3000 lux for 13 days. A fungus having cyanobacterial lytic activity was isolated from the samples of Dochang reservoir. The isolate was identified as Cryptococcus laurentii by Vitek system. From the culture of the isolate, four major extracellular protein bands (29, 35.2, 40.9, 51.1 kDa) have been detected and the 29 kDa protein band was more thickly appeared in the culture with cyanobacteria.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.33-38
• /
• 1995

In resist-discharge printing of cotton fabrics with reactive/reactive dyes the effects of intermediate drying on the white and the colored resist-dischargeabilities were studied. From the results of resist-discharge printing in case of 75% pick up, it was found that the most effective condition of intermediate drying which could at once prevent bleeding and improve the resist-dischargeability was 11$0^{\circ}C$ x 1min. The drying condition of 10$0^{\circ}C$ x 2min or 12$0^{\circ}C$ x 1min can be also recommended. It is important to pay close attention to the intermediate drying temperature and time. Because in case of 75% pick up when drying was carried on at 11$0^{\circ}C$ or 12$0^{\circ}C$ for more than 1 minute the resist-dischargeability was greatly lowerd by the fast fixation of ground color caused by high temperature, and in case of 100 % pick up the insufficient drying of ground color caused the resist-dischargeability to lower with giving rise to various troubles such as bleeding and smearing.