• Informatization Policy
• /
• v.27 no.1
• /
• pp.3-35
• /
• 2020

Interest in smart cities is growing; information and communication technology, urban planning, urban economy development, health, and many other areas are intertwined within smart city research and practice. The definition of smart city is evolving, and its vagueness is sometimes confusing. This review of the smart city literature tries to capture the big picture of this big idea. This review places into context work done since 2016, as earlier work is well reviewed in Albino (2015) and Cochia (2014). First is a review of the various smart city definitions. Second, an inventory of terms related to or subsumed by the smart city label are presented. Third, outcomes of indexes created to measure a city's smartness are presented. Fourth, the taxonomies used to organize the disparate content that falls under the smart city umbrella are discussed. Fifth, the most recent literature associated with six commonly recognized subgenres, namely smart economy, smart governance, smart living, smart people, smart environment, and smart mobility are reviewed. Sixth, important critiques of the smart city idea are presented.

• Journal of Smart Tourism
• /
• v.2 no.1
• /
• pp.5-19
• /
• 2022

Smart tourism is seen as a revolution in the tourism industry, involving innovative and transformative theoretical-practical approaches for the sector. As a result of its application in the tourist context, benefits can be seen such as more sustainable practices, greater mobility and better accessibility in destinations, evolution of processes and experiences of tourists. Much of this is achieved through the support of technological solutions. However, despite the immense expectations, and the many researches carried out on it, a literature summary regarding the dimensions that can be observed in each application of this smart tourism has not yet been proposed. Therefore, supported by the PRISMA recommendation, this research proposed to carry out an integrative review of the literature on smart tourism (in its different levels of application, such as the city, the destination and the smart tourism region), with the objective of mapping the dimensions that underlie it. Thus, from an initial scope of 833 intellectual productions obtained, inputs were found for the dimensions in 363 of them after a thorough analysis. The compilation of data obtained from these productions supported the proposition of 14 operational dimensions of smart tourism, namely: collaboration, technology, sustainability, experience, accessibility, knowledge management, innovation management, human capital, marketing, customized services, transparency, safety, governance and mobility. With this set of dimensions, it is envisaged that the implementation of smart tourism projects can present more comprehensive and assertive results. In addition, shortcomings and opportunities for new research that support the evolution of the theory and practice of smart tourism are highlighted.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.97-102
• /
• 2019

As the number of "Mobility Handicapped" increases, the incidence of "Mobility Handicapped" traffic accidents is also increasing. In order to reduce the incidence of traffic accidents in the "Mobility Handicapped", a service providing system for "Mobility Handicapped" is required. Since these services have different data formats, data heterogeneity occurs. Therefore, the system should resolve the data heterogeneity by mapping the format of the data. In this paper, we design DBaaS as a mobility handicapped system for data interoperability. This system provides a service to extend the flashing time of the traffic lights according to the condition of "Mobility Handicapped" on the occurrence of a fall or a crosswalk in a crosswalk where there is a risk of a traffic accident. These services can reduce the incidence of traffic accidents in "Mobility Handicapped".

• Transportation Technology and Policy
• /
• v.10 no.2
• /
• pp.6-15
• /
• 2013

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.13-18
• /
• 2016

In Internet of Things (IoT) environment, a variety of smart devices are connected to Internet through various network technologies such as 4G/5G, WiBro, Bluetooth, etc. in order to provide the remote monitoring service such as smart healthcare service, etc. Most standard mobility management protocols based on IETF Mobile IP may not be suitable for Internet of Things (IoT) environments due to constrained power, constrained CPU processing and memory capacity, and large signalling overhead which are inherently accompanied by various devices in IoT environments. In this article, we propose a new mobility management protocol CoMP (CoAP-based Mobility Managemenbt Protocol) for reliable mobility management in IoT environments. The architecture and algorithm to achieve both reliability and simplicity for IoT mobility management are proposed. Finally, performance has been evaluated by both mathematical analysis and simulation.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.78-86
• /
• 2019

Recently, IoT researches using sensor data based on embedded networks in various fields including healthcare and sports have been continuously attempted. This study analyzes golf ball mobility to support IoT application in golf sports field. Generally, since the difference in density occurs due to the condition of the inner material and the abnormal state at the time of the outer skin joining during the manufacturing of the golf ball, the weight of each subset is equal for any two points with the same radius in the sphere cannot be guaranteed. For this reason, the deflected weight of the sphere has the undesirable effect of hitting the ball in a direction in which the weight of the ball is heavy. In this study, it is assumed that there is a unique center of gravity of the ball, and even if the golf ball cannot be manufactured perfectly, it wants to establish the basic principle to accurately recognize or mark the putting line based on the center of gravity. In addition, it is evaluated how the mobility of the golf ball with a deviation from the center of gravity of the golf ball affects the progress path (or movement direction) and the moving distance (or carry distance) after the golfer hits. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis.

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.231-239
• /
• 2013

This research developed a smart girdle for adult women in their 20's that has an inserted carbon weaving heater to help with relief from coldness and abdominal disease through the thermal insulation effect. A pocket of powernet fabric was attached to the inside of the girdle for the easy insertion and separation of the heating device, while the heating device was fixed to a mesh material by cotton yarn and was wrapped with elastic lining material to prevent the mechanical devices from being exposed. A set of 3 hooks was attached to the center of the back of the heating device in consideration of convenience and mobility. Whereas the switch was inserted into around the right waistband, and the battery into the inner pocket around the waist, to integrate the heating device with the girdle. The satisfaction and usability of the fabricated smart girdle was verified by having research participants wear it to evaluate the appearance change caused by the device, the inconvenience of wearing/unwearing, mobility, and the satisfactory functionality of the device. As a result, the grand mean was evaluated to be high, with appearance (4.19), mobility (4.17), and functionality (4.51) being higher than 4.00; which indicates that the heat generation function of the smart girdle is effective. It may be said that such collection and analysis of data that reflect users' opinions have value and significance in that they can be grafted onto future research on new technology as well as they contribute to taking a step forward in the rapidly increasing research of smart clothing, with the new-type clothing equipped with new function.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.1
• /
• pp.6-12
• /
• 2017

In this paper, we proposed IoT based Smart Health Service using Motion Recognition for Human UX/UI. Until now, sensor networks using M2M-based u-healthcare are using non-IP protocol instead of TCP / IP protocol. However, in order to increase the service utilization and facilitate the management of the IoT-based sensor network, many sensors are required to be connected to the Internet. Therefore, IoT-based smart health service is designed considering network mobility because it is necessary to communicate not only the data measured by sensors but also the Internet. In addition, IoT-based smart health service developed smart health service for motion detection as well as bio information unlike existing healthcare platform. WBAN communications used in u-healthcare typically consist of many networked devices and gateways. The method proposed in this paper can easily cope with dynamic changes even in a wireless environment by using a technology supporting mobility between WBAN sensor nodes, and systematic management is performed through detection of a user's motion.

• Journal of Powder Materials
• /
• v.27 no.2
• /
• pp.139-145
• /
• 2020

The powder manufacturing process using the gas atomizer process is easy for mass production, has a fine powder particle size, and has excellent mechanical properties compared to the existing casting process, so it can be applied to various industries such as automobiles, electronic devices, aviation, and 3D printers. In this study, a modified A4032-xSn (x = 0, 1, 3, 5, and 10 wt.%) alloy with low melting point properties is investigated. After maintaining an argon (Ar) gas atmosphere, the main crucible is tilted; containing molten metal at 1,000℃ by melting the master alloy at a high frequency, and Ar gas is sprayed at 10 bar gas pressure after the molten metal inflow to the tundish crucible, which is maintained at 800℃. The manufactured powder is measured using a particle size analyzer, and FESEM is used to observe the shape and surface of the alloy powder. DSC is performed to investigate the change in shape, according to the melting point and temperature change. The microstructure of added tin (Sn) was observed by heat treatment at 575℃ for 10 min. As the content of Sn increased, the volume fraction increased to 1.1, 3.1, 6.4, and 10.9%.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.301-313
• /
• 2021

The automotive industry is facing a paradigm shift, changing from owning to sharing and from manufacturing to service. However, it is hard to conclude that the economic value of smart mobility service is always positive to users. Cost related to owing or share a vehicle is very hard to estimate from the perspective of potential users as well as the benefit of the service. Focusing on the cost side of the story, this study develops a cost estimating model based on three main factors: electrification, advanced driving assistant systems (ADAS) function, and participation of ride-sharing service. As a result of the model analysis, low cost was estimated as a result when receiving cost benefits such as electrification and ride-sharing participation. Various factors were analyzed through sensitivity analysis also. These results can provide useful insights into the cost prediction and strategies for potential users and manufacturers on smart mobility service market.