• Journal of the Korean Society of School Health
• /
• v.29 no.3
• /
• pp.167-179
• /
• 2016

Purpose: This study was performed to analyze the job of school health teachers working at high schools in Seoul, using DACUM (Developing a curriculum), a method for analyzing job-focused competency. Methods: A DACUM workshop was held to define school health teachers' role and identify their duties and tasks. For the workshop, a committee was organized, consisting of 5 school health teachers. Finally, the developed contents, after validation, were made into a survey asking about school health teacher's duties and tasks and the survey was carried out on 37 school health teachers. Results: 14 duties and 90 tasks were identified on the DACUM chart. The importance, difficulty, and frequency of the tasks were represented with ${\alpha}$ bet A, B, and C, with A being the highest degree. The duty with the biggest determinant coefficient (DC) was 'management of emergency patients' (DC=7.95), while the lowest was 'management of health clinic supplies' (DC=4.33). In terms of tasks, the one with the biggest DC was 'conducting physical assessment for emergency patients' (DC=7.8), followed by 'conducting health classes' (DC=7.79). 'Supervising school lunch' (DC=2.02) and 'supervising self-study' (DC=2.42) were the tasks with the smallest and the second smallest DC. Conclusion: The results of the study show that school health teachers'job expanded to include preventive activities such as health education, health counseling, and health promotion activities. The results of this study can serve as basic data for developing training programs for school health teachers as well as an evaluation-scale to measure school health teachers' job performance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.699-705
• /
• 2001

Six types of planar thermal converters from TC 1 to TC 6 were designed and fabricated for the purpose of being used as practical standards to alternating current. The respective voltage responses in air and in a vacuum of TC 6, which has the smallest thermal loss, were about 4.03mV/mW and about 6.38 mV/mW. Thermal time constant of TC 6, which has also the smallest heater thermal inertia, was about 8 ms. The respective variations of AC-DC voltage and current transfer errors from sample to sample, which were measured by FRDC(fast reversed DC) method, were about $\pm$0.41 ~$\pm$0.85 ppm and about $\pm$0.15~$\pm$1.16 ppm in the frequent range of 40 Hz~10 KHz with appling 1 V and 5 mA rms sine waves to the converters. All converters investigated exhibited sufficiently low AC-DC transfer errors to be used as practical standards.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.387-390
• /
• 1985

The effect of extracting conditions on the content of inorganic compounds of red ginseng extract was studied with respect to the change in ethanolic concentration ranges of $0{\sim}90%$ and temperature of $70{\sim}100^{\circ}C$ during $1{\sim}5$ times of extraction. Each extraction time was taken 8 hours at given temperature. Little effect of temperature on inorganic compounds was observed, while higher ethanol concentrations, particularly higher than 70%, were resulted a significant decreased in their contents. The yield of inorganic compounds in water was shown 80% over after 3rd extraction, while content of crude ash was observed similar tendency and their contents were significant increased in water than in 70% ethanolic concentration. In the process of extraction with water, 1.55% of the potassium content was the highest value, and the smallest was 11ppm of the copper. But in the extraction ratio to raw mateirls, the highest ratio was 91.4% of the calcium, and smallest was 30.4.% of the magnesium.

• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.98-107
• /
• 2020

Objective: The aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions. Methods: Transverse skeletal parameters and posterior tooth inclinations were evaluated using cone beam computed tomography images, and occlusal force as well as contact area were assessed using pressure-sensitive films in 124 normodivergent adults. A linear mixed model was used to cluster posterior teeth into maxillary premolar, maxillary molar, mandibular premolar, and mandibular molar groups. Differences among Class I, II, and III groups were compared using an analysis of variance test and least significant difference post-hoc test. Correlations of posterior dental inclinations to occlusal function were analyzed using Pearson's correlation analysis. Results: In male subjects, maxillary premolars and molars had the smallest inclinations in the Class II group while maxillary molars had the greatest inclinations in the Class III group. In female subjects, maxillary molars had the smallest inclinations in the Class II group, while maxillary premolars and molars had the greatest inclinations in the Class III group. Occlusal force and contact area were not significantly different among Class I, II, and III groups. Conclusions: Premolar and molar inclinations showed compensatory inclinations to overcome anteroposterior skeletal discrepancy in the Class II and III groups; however, their occlusal force and contact area were similar to those of Class I group. In subjects with normodivergent facial patterns, although posterior tooth inclinations may vary, difference in occlusal function may be clinically insignificant in adults with Class I, II, and III malocclusions.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.6
• /
• pp.608-618
• /
• 2000

We consider the problem of placing resources in a distributed computing system so that certain performance requirements may be met while minimizing the number of required resource copies, irrespective of node or link failures. To meet the requirements for high performance and high availability, minimum number of resource copies should be placed in such a way that each node has at least two copies on the node or its neighbor nodes. This is called the fault-tolerant resource placement problem in this paper. The structure of a parallel or a distributed computing system is represented by a graph. The fault-tolerant placement problem is first transformed into the problem of finding the smallest fault-tolerant dominating set in a graph. The dominating set problem is known to be NP-complete. In this paper, searching for the smallest fault-tolerant dominating set is formulated as a state-space search problem, which is then solved optimally with the well-known A* algorithm. To speed up the search, we derive heuristic information by analyzing the properties of fault-tolerant dominating sets. Some experimental results on various regular and random graphs show that the search time can be reduced dramatically using the heuristic information.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.7
• /
• pp.983-994
• /
• 2004

The aim of this study is to provide fundamental data on the development of ready-to-wear clothes appropriate for the body types of elderly women. The study was conducted targeting 318 elderly women over 60 years of age whose fields of action were colleges for the elderly, sports centers, or business sites in Seoul and the neighboring districts. A total of 44 features in the upper body were used for the anthropometric measurement and analysis using anthropometry and photometry. The results of the study are as follows: 1. Somatotypes were classified into three types according to a cluster analysis using height and weight indices. Type 1 is the group with long and undersized upper body and straight body type since the face of the upper body is long relative to height and width, girth and depth are the smallest relative to weight, the breasts are somewhat fat, with a small extent of drooping and a straight back. Type 2 is the group that is considered fat relative to the body, has broad shoulders, drooping breasts with a wide space between them, and a back-bent upper body. Type 3 is the group that has a bent shape, the shortest upper body relative to height, and showing average obesity factors. 2. Indices of height and weight were used for factor analysis, cluster analysis, and discriminant analysis in order to classify upper body somatotype according to shape while excluding size factors of elderly women＇s upper body somatotype. The same method was used to compare and verify the result according to the absolute measurement and height index. Classification based on height and weight indices demonstrate that such somatotype classification minimizes the personal equation of body shape and it induces better classification based on shape as the results showed the highest cumulative sum of square(CUSUM) at 78.38% while six factors showed the smallest result and the hit rate for the classified three groups showed the highest result at 95.30%.

• School Mathematics
• /
• v.15 no.3
• /
• pp.633-650
• /
• 2013

The aim of this paper is to explore and understand, using in-depth interviews, the participant's interests and discourse analytic expressions in studying the notion of infinity and limit. In addition we tried to understand how the participant's ways of dealing with math and thinking patterns on the polygons whose boundary is infinite but area is finite as they brought up such examples. Further follow-up questions are posed on the infinite sum of a smallest number close to 0 and the sum of infinite sets of different smallest numbers close to 0. Larger aspects of two pre-service teachers' subjective thinking patterns and colloquial discourses were sketched by contrasting the three posed tasks. Cross case discussions are provided with several suggestions for the future research directions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.43-52
• /
• 1994

This paper outlines a new approach to the line generalization when preparing small scale map on the basis of existing large scale digital map. Line generalizations are conducted based on Douglas algorithm using 1/25,000 scale topographic maps of southeastern JEJU island which produced by National Geographic Institute to analyze the fitness to the original and problems of graphical representation. Compare to the same scale map which was generated by manual method, a verity of small, but sometimes significant errors ＆ modification of topological relationship have been detected. The research gives full details of three algorithms that operationalize the smallest visible object method, together with some empirical results. A comparison of the results produced by the new algorithms with those produced by manual generalization and Douglas method of data reduction is provided. Also this paper presents the preliminary results of an relationships between the size of smallest visual object and requiring data storages for each algorithms.

• Plant Journal
• /
• v.10 no.1
• /
• pp.34-39
• /
• 2014

Simulation works for comparing removal capabilities of acid gases contained in natural gas among several aqueous amine absorbents using commercial process simulator PROMAX(BR&E Co.) were carried out. Amine aqueous solution used in this study were 30 wt% MEA, 30 wt% DEA, 50 wt% MDEA, and 50 wt% MDEA with 3 wt% piperazine as additive. We obtained the simulated results that while MEA aqueous solution is relatively capable of more $CO_2$ gas, but DEA, MDEA, MDEA aqueous solutions with piperazine as additive are capable of more $H_2S$ gas. Also, we found that 30 wt% MDA aqueous solution is the smallest circulate rate of lean amine solution, and 50 wt% MDEA aqueous solution with 3 wt% piperazine as additive is the smallest heat duty in stripping unit. 50 wt% MDEA aqueous solution with 3 wt% piperazine as additive is found less amine circulation rate than 50 wt% MDEA due to the introduction of additive.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.3033-3038
• /
• 2013

Nanoscale Chevrel $Mo_6S_8$ powders are synthesized by molten salt synthesis. Synthesized $Mo_6S_8$ powders have different mean particle sizes which are dependent on a ratio of salt to precursor. The particle sizes of $Mo_6S_8$ powders changes along with the ratio increase. $Mo_6S_8$ (6:1) demonstrates the best electrochemical characteristics among the synthesized $Mo_6S_8$ powders although the $Mo_6S_8$ (4:1) has the smallest particle size. $Mo_6S_8$ (6:1) shows a reversible capacity of 83.9 $mAhg^{-1}$, which is 27.5% and 33% improved value over $Mo_6S_8$ (2:1) and $Mo_6S_8$ (4:1) at a current density of 0.2C, respectively. The superior electrochemical properties of $Mo_6S_8$ (6:1) are attributed to the balanced particle size which provides proper contact area with electrolyte and the shortened $Mg^{2+}$ diffusion length. The $Mo_6S_8$ (4:1) has the smallest particle size but further reduction of particle size from $Mo_6S_8$ (6:1) is not advantageous.