• Journal of Advanced Marine Engineering and Technology
• /
• 제37권5호
• /
• pp.467-476
• /
• 2013

동결농축법은 열역학적 효율이 높고 에너지 소비량이 작으며 처리수를 재활용할 수 있는 장점을 가지고 있다. 본 연구에서는 중소규모로 상용화 가능한 동결농축폐수처리시스템을 설계하고, 각 시스템의 에너지 소비효율과 일일처리량을 비교하여 시스템 개발방향을 제안하고자 하였다. 시스템을 완속운전시스템과 급속운전시스템으로 각각 모델링하고 해석을 통해 소비동력과 운전시간을 계산하여 비교한 다음 설계처리량에 따른 변화를 추가 검토하였다. 연구결과 급속운전시스템의 소비전력량비가 0.6 Wh/kg 만큼 다소 높으나 일일처리량은 19 % 증가하였으며, 설계처리량이 큰 시스템일수록 소비전력량비가 작아지고 일일처리량이 큰 결과를 얻었다.

• 한국수자원학회논문집
• /
• 제40권12호
• /
• pp.995-1005
• /
• 2007

본 연구에서는 하천유역에서 소수력 개발 대상지점에서의 최적규모를 결정하는 방안을 제시하였다. 제시된 방안은 지형 및 수문자료의 구축, 발전소 모의운영, 경제성분석, 최적규모 결정과 같은 일련의 절차로 이루어진다. 최적규모 결정을 위해 경제성 평가지표 가운데 하나인 순현가를 이용하였고, 이를 통해 최적 설계유량과 시설물의 최적규모를 도출하였다. 초기비용의 산출을 위하여 기존 소수력발전소의 비용 자료를 검토하여 함수식을 개발하였고, 편익 산정시 현재 공시된 전력 기준단가를 이용하였다. 이러한 일련의 절차를 기존에 조사된 금강수계의 초강유역에 위치한 댐식, 수로식 소수력 지점 2개소에 적용하였으며, 최종적으로 설계유량과 시설물의 규모 변화에 따른 NPV 민감도를 확인하여 최적규모를 결정하였다. 본 연구에서 제시한 방법은 소수력 개발지점에서의 최적규모 및 경제성 여부를 사업추진 이전에 개략 추정하여 잠재수력 부존량을 확인함으로써 사업시행주체의 의사결정 지원 측면에서 활용도가 높을 것으로 기대된다.

• 한국수자원학회논문집
• /
• 제56권12호
• /
• pp.855-869
• /
• 2023

도심지의 잦은 홍수피해를 해결하기 위한 대책으로 저영향개발기법은 지속적으로 연구중에 있다. LID는 도시화의 영향으로 부터 물순환을 회복하기 위해 강우유출 지점에서 침투 및 저류를 기반으로 개발이전의 물순환 상태로 회복하기 위해 도입된 기술이다. 그 중 식생저류지는 LID 요소중 하나로 우수유출수의 침투 및 저류를 통해 유출량을 감소하고, 비점오염원 저감 효과를 가지고 있다. 식생저류지의 연구는 지속적으로 수행되었으나 소유역 규모에서의 정량적 성능연구는 부족한 실정이다. 본 연구에서는 정량적 수문해석을 할 수 있는 K-LIDM (Korea-Low Impact Development Model)을 활용하여 식생저류지 유역 구축을 통해 유출량 저감성능 분석을 수행하였다. 연구결과는 추후에 유역특성, 식생유형 및 토양상태 등 여러가지 변수들을 포함한 연구수행시 참고자료로 활용될 수 있을것으로 사료된다.

• 한국수자원학회논문집
• /
• 제39권6호
• /
• pp.545-552
• /
• 2006

본 연구에서는 노후관망의 최적개량 계획수립을 위한 의사결정모형을 개발하였다. 각각의 관거에 대한 개량계획을 수립하는 기존에 개발된 다른 모형과 달리 노후화된 상수관망을 소구역으로 구분하여 각 소구역의 개량계획을 수립하였다. 개발된 모형에서는 최적개량 의사결정을 위해 개량비용(교체비용, 갱생비용, 유지보수비용), 개선이익(펌프운영비 감소이익, 누수 감소이익) 및 수리학적 타당성을 고려하였다. 화음탐색법을 최적화기법으로 적용하였으며 수리학적 타당성 검토를 위해 수리해석 모형인 EPANET을 연계하였다. 대구시의 실제 상수도관망에 개발된 모형을 적용하였으며, 매설기간과 관의 종류에 의존하는 기존 방법과 달리 관의 내구성, 통수능, 비용 등을 고려하는 최적개량의사결정 시스템으로 활용될 수 있음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.360-360
• /
• 2008

Steelmaking industry is widely known to use a lot of water and same amount of wastewater is generated. Although toxicity of wastewater from Steelmaking industry is low, it contains an amount of various organic materials and Fe-Oxides. It is important to recycle the wastewater because of water shortages and water pollution. In general, large-scale equipment is necessary to process the wastewater. On the other hand, superconducting high gradient magnetic separation (HGMS) system can process the wastewater in the small space. Superconducting HGMS system that had a purpose to purify the wastewater was assembled. Cryo-cooled Nb-Ti superconducting magnet was used for magnetic separator. This system can operate continuously because contaminated filters can keep on returning after cleaning. The various magnetic seeding reactions were investigated to increase the reactivity of coagulation. Filter cleaning system was developed to decrease the quantity of clean water. This research was supported by a grant from Korea Electrotechnology Research Institute, Republic of Korea.

• 한국농공학회지
• /
• 제35권2호
• /
• pp.23-32
• /
• 1993

This paper describes the background and the development of a hydrologic network flow model. The model was development to simulate daily water demand and supply for selected stream reaches within a watershed, and used as a tool for evaluating, simulating, and planning a water resources system. The proposed network flow model considers daily runoff from subareas, various water demands, and diversion structures within each subarea. Daily streamflow at a reach is simulated after balancing the water demands from subareas. The lateral inflow from subareas is simulated using a modified tank model. Total water demands consist of the daily demands for agricultural, domestic, industrial, livestock, fishery, and environmental uses within a rural district. The return flow, diversions from sources and storage components such as reservoirs were also incorporated into the mode l . The developed model is a generalized version that may be applied to different combinations of river reaches for a given system. This may help potential users identify areas where water supply does not suffice the demands for different time horizons.

• 동력기계공학회지
• /
• 제21권6호
• /
• pp.79-85
• /
• 2017

A heat pump system is a highly efficient, eco-friendly device which consumes a small amount of energy and supply a lot of energy for heat formation. In addition, it is a single device system that has low generation effect about carbon dioxide. There are many researches related to the electronic expansion valve and the heat pump, but the detailed data analysis of each influence is insufficient. In this study, the cooling capacity and COP of the heat pump system were investigated by varying frequency of the inverter connected to compressor, inlet temperature of chilled water into evaporator and inlet temperature of cooling water into condenser. The results are as follows : (1) The cooling capacity increased as the inverter frequency, inlet temperature of chilled water into evaporator increased, and inlet temperature of cooling water into condenser decreased. (2) The COP increased as the frequency of inverter, inlet temperature of cooling water into condenser decreased and the inlet temperature of chilled water into evaporator increased.

• 한국환경복원기술학회지
• /
• 제16권1호
• /
• pp.181-191
• /
• 2013

The design process of ecological and environmental detention system located in the housing district of Sinjeong 3-jigu in Seoul are as follows. At stage one, a new dispersal detention was created in the neighborhood park located near the originally planned detention. From this, the amount of storage of this dispersal detention system was enlarged from $28,337m^3/d$, the initial storage amount, to $33,606m^3/d$ as the post storage amount, responsible to the amount of rainfall which happens every 100 years. In particular, the SSB (Sustainable Structured wetland Biotop) system, which was the New Excellent Technology verified by the Ministry of Environment (No. 258) was applied to enhance ecological functioning and water quality with the detention as a constructed wetland. At stage two, the treatment plans for non-point pollutant source occurred at the initial period of rain, flowing into the detention system were built for purifying the water of the retention pond at the base of the detentions, and the water-circulation system was designed at the dispersal detentions on the period of regular rainfalls. The non-point pollutant source flowing into detention site was calculated as $11,699m^3/d$ flowing down from seven small watersheds, which occurred at the initial period of rain. In particular the SSB systems improved the average efficiency of the water processing performance to BOD 60%, SS 90%, T-N 30%, T-P 60%. At stage three, the ecological network and biological diversity were strongly considered so that it brought the residents with amenity places. In particular, the dispersal detentions were successfully designed to restore the ecological habitat of endangered plant and animal species such as narrow-mouthed.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2349-2355
• /
• 2023

In the TRITIUM project, an on-site monitoring system is being developed to measure tritium (³H) levels in water near nuclear power plants. The quite low-energy betas emitted by ³H have a very short average path in water (5 ㎛ as shown by simulations for 18 keV electrons). This path would be further reduced by impurities present in the water, resulting in a significant reduction of the detection efficiency. Therefore, one of the essential requirements of the project is the elimination of these impurities through a filtration process and the removal of salts in solution. This paper describes a water treatment system developed for the project that meets the following requirements: the water produced should be of near-pure water quality according to ISO 3696 grade 3 standard (conductivity < 10 µS/cm); the system should operate autonomously and be remotely monitored.

• 한국물환경학회지
• /
• 제33권1호
• /
• pp.90-96
• /
• 2017

Many sewage treatment plants have applied the advanced technology of chemical coagulant system to remove phosporus in Korea. However there are some problems for the injection of optimum coagulant dosage. In order to solve these problems, the research related to the more cost-effective automatic total phosphorus coagulation control system using an EC(Electrical Conductivity) have been in progress. This study was conducted by the same process and operation method as the Lab-scale for public small town sewage treatment plant. First, it confirmed the correlation among the EC, PO4-P and coagulant dosage in the Lab-scale MSBR(Membrane Sequencing Batch Reactor) process. Next, it analyzed that correlation coefficient of EC and the coagulant dosage was 0.92 in the Full-scale MSBR process. As a result, not only T-P removal efficiency was doubled but also it satisfied the effluent water quality standard in a stable manner. In addition, by applying the automatic control system using the EC, compared to the fixed coagulant injection system the coagulant dosage could be reduced by 28%.