• 접착 및 계면
• /
• 제5권2호
• /
• pp.14-26
• /
• 2004

For reliable determination of mechanical characteristics of adhesively bonded joints used e.g. as input data for computer-aided design of complex components, the thick-adherend tensile-shear test according to ISO 11003-2 is the most important material testing method. Although the total displacement of the joint is measured across the polymer layer directly in the overlap zone in order to minimize the influence of the stepped adherends, the substrate deformation must be taken into account within the framework of the evaluation of the shear modulus and the maximum shear strain, at least when high-strength adhesives are applied. In the standard ISO 11003-2 version of 1993, it was prescribed to perform the substrate deformation correction by means of testing a one-piece reference specimen. The authors, however, pointed to the excessive demands on the measuring accuracy of the extensometers connected with this technique in industrial practice and alternatively proposed a numerical deformation analysis of a dummy specimen. This idea of a mathematical correction was included in the revised ISO 11003-2 version of 2001 but in the simplified form of an analytical method based on Hooke's law of elasticity for small strains. In the present work, it is shown that both calculation techniques yield considerably discordant results. As experimental assessment would require high-precision distance determination (e.g. laser extensometer), finite element analyses of the deformation behavior of the bonded joint are performed in order to estimate the accuracy of the obtained substrate deformation corrections. These simulations reveal that the numerical correction technique based on the finite element deformation modeling of the reference specimen leads to considerably more realistic results.

• 한국지진공학회논문집
• /
• 제16권2호
• /
• pp.35-45
• /
• 2012

본 논문에서는 지진시 역 T형 옹벽에 작용하는 기초 접지압의 변화를 Mononobe-Okabe공식을 이용하는 기존의 유사정적 설계기법과, 지반의 비선형 부지증폭현상 고려한 유한차분해석을 이용하여 살펴 보았다. 옹벽 설계에 있어서 높이 10m를 초과하는 역 T형 옹벽의 경우 상시 안정조건을 만족함에도 불구하고 지진시 지지력 안정조건을 만족하지 못하는 경우가 발생한다. 안정조건을 만족시키지 못하는 주요 원인은 동토압으로 야기되는 편심하중 증가로 인한 기초 유효저면적의 감소이다. 본 논문에서는 역 T형 옹벽의 지진시 유효저면적의 변화를 유한차분해석프로그램(FLAC)을 이용하여 살펴보았으며, 그 결과로부터 동적지지력 계수의 설계 적용성을 검토하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.309-312
• /
• 2008

본 연구는 강선 부식이 PSC보 휨강도에 미치는 영향을 알아보기 위해 실내실험을 수행하였다. 긴장력을 달리하여 길이 4m인 PSC보부재 5개를 제작하였으며, 그 중 2개의 부재는 덕트 내부에 있는 PS강재를 노출시킨 상태에서 부식촉진장치를 이용해 인위적으로 PS강재를 부식시켰다. 실험부재의 파괴시까지 정적하중을 재하하면서 철근과 콘크리트의 변형률, 중앙부의 처짐량 변화를 측정하였으며 또한 음향센서를 콘크리트 표면에 부착하여 PS강선의 파단횟수 및 파단시기 등을 계측하였다. 실험 결과, PS강재가 부식된 부재는 PS강재의 단면 감소를 고려해 계산한 휨강도 이론값보다 작은 실험값이 나왔다. 또한 휨 파괴 이전에 PS강재가 조기에 파단되는 현상이 관찰되었으며, 결과적으로 휨강도가 급격히 감소됨을 확인할 수 있었다. 부식된 PS강재를 포함하고 있는 PSC보의 휨강도 평가시 일방향 육안관찰에 의한 PS강재의 단면적을 산정하는 것은 매우 어려운 일이며, 연성거동을 위한 유효 PS강재의 단면적을 판단하는 것은 매우 복잡한 일이라 판단된다.

• Structural Engineering and Mechanics
• /
• 제21권6호
• /
• pp.659-676
• /
• 2005

The novel form of composite walling system consists of two skins of profiled steel sheeting with an in-fill of concrete. The behaviour of such walling under in-plane shear is important in order to utilise this system as shear elements in a steel framed building. Steel sheet-concrete interface governs composite action, overall behaviour and failure modes of such walls. This paper describes the finite element (FE) modelling of the shear behaviour of walls with particular emphasis on the simulation of steel-concrete interface. The modelling of complex non-linear steel-concrete interaction in composite walls is conducted by using different FE models. Four FE models are developed and characterized by their approaches to simulate steel-concrete interface behaviour allowing either full or partial composite action. Non-linear interface or joint elements are introduced between steel and concrete to simulate partial composite action that allows steel-concrete in-plane slip or out of plane separation. The properties of such interface/joint elements are optimised through extensive parametric FE analysis using experimental results to achieve reliable and accurate simulation of actual steel-concrete interaction in a wall. The performance of developed FE models is validated through small-scale model tests. FE models are found to simulate strength, stiffness and strain characteristics reasonably well. The performance of a model with joint elements connecting steel and concrete layers is found better than full composite (without interface or joint elements) and other models with interface elements. The proposed FE model can be used to simulate the shear behaviour of composite walls in practical situation.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.261-269
• /
• 1998

스퍼터링 중 500~600 Oe의 자기장을 인가한 상태에서 제조된 비정징 Sm-Fe 합금 박막에서 6$\times$104 J/m3 크기의 유도자기이방성이 형성되었다. 자장 증착에 이해유도자기이방성이 형성된 합금 박막은 이방성이 형성되지 않은 합금 박막에 비해 자구 구조에 무관한 "포화" 자기변형은 유사하지만, 측정 방향에 따른 자기변형의 이방성 비는 최대 35 정도로서 매우 크게 증가하였다. 이는 자기변형 박막의 디바이스 응용시 성능을 크게 향상시키므로, 실용적인 측면에서 매우 중요하다. 스퍼터링 중 자기장을 인가하지 않고 통상의 마그네트론 스퍼터링에 의해 제조된 비정질 Sm-Fe 합금 박막을 넓은 조성 범위에 걸쳐서 체계적으로 소자한 결과, 이러한 합금 박막에서도 미약하나마 스퍼터링 중의 누설 자계에 의해 증착 도중 유도자기이방성이 형성되는 것을 관찰하였으며, 최대의 유도자기이방성은 Sm 함량 25~30 원자%에서 얻어졌다. 또한 본 합금 박막의 유도자기이방성은 자장 중 열처리에 의해서도 형성되는 것을 관찰하였는데, 형성된 이방성의 크기는 자장 증착에 의해 제조된 시료보다 매우 작게 나타났다. 이는 자장 증착의 경우 원자의 표면 확산을 통한 원자의 이동에 의해 유도자기이방성이 형성되나, 증착 후 자장 열처리에 의한 경우는 체적 확산에 의해 유도자기이방성이 형성되기 때문으로 생각된다.때문으로 생각된다.

• 한국안전학회지
• /
• 제8권4호
• /
• pp.107-113
• /
• 1993

Small rectangular explosion chamber of its size 25cmX25cmX32cm with a circular bursting diaphram at the top was used to study the mechanism of gas explosion to fire transition phenomena, the process of ignition of solid combustibles during a gas explosion. To visulize the explosion to fire transition phenomena, transparent acryl window and high speed camera system were used. The test piece of solid combustible in this experiments was a 5cm$\times$5cm square sheet of newspaper which was placed in the explosion chamber filled with a LPG-air mixture. The mixture was ignited by an electric spark at the center of the chamber. Explosion to fire transition phenomena and the behavior of out flow and in flow of gas through the opening yielded by bursting the diaphram was visualized with shlieren system and without shlieren system. Diameter of a bursting dlaphram at the top of the explosion chamber was varied 5cm, 10cm, and 15cm, and the position of test piece were varied with 6 point. Explosion pressure was measured with strain type pressure transducer, and the weight difference of the test piece before and after each experimental run was measured. By comparing the weight difference of solid combustibles before and after the experiment and the behavior of out flow and inflow of gas after explosion, it was found that the possibility of ignition was depends on the LPG-air mixture concentration and the exposure period of test piece to the burnt gas. Test result of this experiments it was found that the main factor of this phenomena are that heat transfer to the test piece, and the pyrolysis reaction of test piece. Based on the results, the mechanism of the explosion to fire transition phenomena were inferred ; gas explosion- heat transfer to solid combustibiles ; pyrolysis reaction of solid combutibles : air inflow ; mixing of the pyroly gas with air ignition.

• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.377-385
• /
• 2018

For the investigation of dopant profiles in implanted $Si_{1-x}Ge_x$, the implanted B and As profiles are measured using SIMS (secondary ion mass spectrometry). The fundamental ion-solid interactions of implantation in $Si_{1-x}Ge_x$ are discussed and explained using SRIM, UT-marlowe, and T-dyn programs. The annealed simulation profiles are also analyzed and compared with experimental data. In comparison with the SIMS data, the boron simulation results show 8% deviations of $R_p$ and 1.8% deviations of ${\Delta}R_p$ owing to relatively small lattice strain and relaxation on the sample surface. In comparison with the SIMS data, the simulation results show 4.7% deviations of $R_p$ and 8.1% deviations of ${\Delta}R_p$ in the arsenic implanted $Si_{0.2}Ge_{0.8}$ layer and 8.5% deviations of $R_p$ and 38% deviations of ${\Delta}R_p$ in the $Si_{0.5}Ge_{0.5}$ layer. An analytical method for obtaining the dopant profile is proposed and also compared with experimental and simulation data herein. For the high-speed CMOSFET (complementary metal oxide semiconductor field effect transistor) and HBT (heterojunction bipolar transistor), the study of dopant profiles in the $Si_{1-x}Ge_x$ layer becomes more important for accurate device scaling and fabrication technologies.

• Journal of Microbiology and Biotechnology
• /
• 제17권2호
• /
• pp.262-270
• /
• 2007

Of the twelve lytic bacteriophages recovered from five different fermenting cucumber tanks that were inoculated with Pediococcus sp. LA0281, a lytic phage, ${\phi}ps05$, was characterized in the present study. The plaques were mostly clear and round-shaped on the lawn of starter strain, indicating lytic phage. Overall appearance indicated that it belongs to the Siphoviridae family or Bradley's group B1, with a small isometric head and a flexible noncontractile tail with swollen base plate. The average size was found to be 51.2 nm in head diameter and 11.6 nm wide ${\times}$ 129.6 nm long for the tail. The single-step growth kinetics curve showed that the eclipse and the latent period were 29 min and 34 min, respectively, and an average burst size was calculated to be 12 particles per infective center. The optimum proliferating temperature ($35^{\circ}C$) was slightly lower than that of cell growth ($35\;to\;40^{\circ}C$). The structural proteins revealed by SDS-PAGE consisted of one main protein of 33 kDa and three minor proteins of 85, 58, and 52 kDa. The phage genome was a linear double-stranded DNA without cohesive ends. Based on the single and double digestion patterns obtained by EcoRI, HindIII, and SalI, the physical map was constructed. The overall size of the phage genome was estimated to be 24.1 kb. The present report describes the presence of a lytic phage active against a commercial starter culture Pediococcus sp. LA0281 in cucumber fermentation, and a preliminary study characterizes the phage on bacterial successions in the process of starter-added cucumber fermentation.

• 한국미생물·생명공학회지
• /
• 제42권2호
• /
• pp.99-105
• /
• 2014

가정에서 제조된 된장을 산성조건에서 계대 배양한 후 균체외 mannanase 를 생산하는 Bacillus sp. YB-1401를 분리하였다. 분리균의 당이용능을 비롯한 생화학적 특성은 Brevibacillus laterosporus와 유사도(61.1%)가 가장 높은 반면에 16S rRNA 유전자의 염기서열은 B. amyloliquefaciens와 유사도가 가장 높았다. 분리균 YB-1401의 mannanase 생산성은 mannans에 의해 급격하게 증가하였으며, 특히 곤약(4%)이 첨가된 배지에서 약 265 U/ml로 최대 생산성을 보였다. 분리균의 mannanase는 $55^{\circ}C$와 pH 5.5 반응조건에서 최대활성을 보였으며 pH 3.5-11.0의 범위에서 1시간 방치하였을 때 실활이 거의 일어나지 않았다. 또한 LBG와 guar gum 및 mannooligosaccharides를 mannanase로 분해하였을 때 주된 반응산물로 mannobiose와 mannotriose가 생성되었으며 mannose도 소량 생성되었다.

• Applied Biological Chemistry
• /
• 제38권6호
• /
• pp.490-495
• /
• 1995

Cellulomonas sp. KL-6 균주가 생산하는 cellulase 중 CMCase나 FPase는 세포외로 다량 분비되나 ${\beta}-glucosidase$는 cell bound form으로 존재하여 배양액에서의 생산은 극히 미약하였다. CMCase와 FPase는 배양 5일째에, ${\beta}-glucosidase$는 배양 4일째에 각각 최대생산을 나타내었다. $CaCO_3(0.1%)$가 첨가된 효소생산 최적조건에서 CMCase는 $82\;unit/m{\ell}$를, FPase는 $80\;unit/m{\ell}$를 그리고 ${\beta}-glucosidase$는 $1.2\;unit/m{\ell}$를 각각 생산하였고 이는 기본배지에서 보다 $60{\sim}70%$의 생산증가를 가져왔다. KL-6 균주는 lignase와 laccase의 생산은 없었다.