• 식물병연구
• /
• 제10권2호
• /
• pp.121-125
• /
• 2004

2000년도와 2001년도에 남부지방(구례, 별교, 영암)의 시설 내 오이재배지에서 갈색무늬병에 피해가 심하였다. 잎에서 전형적인 수침상 병반이 생기고 초기에 황색 halo를 지닌 갈색반점이 생긴 후 점차 불규칙하고 큰 병반으로 진전되어 때때로 낙엽을 유발하였다. 감염잎으로부터 분리한 병원균은 분생자경에 연쇄상 혹은 단일 분생포자를 형성하였고 분생포자는 거의 무색에서 올리브 갈색 내지는 갈색을 띠었으며 모양은 7-11개의 위격벽을 지닌 원통형,역곤봉형, 직립형, 만곡형 등이었다. 또한 분리 병원균의 ITS영역의 염기서열은 Corynespora cassciicola와 일치하였다. 형태적, ITS영역 분석을 기초로 분리된 병원균은 C. cassiicola로 동정하였다. 병원균의 생육은 3$0^{\circ}C$ Czapek Solution Agar 배지에서 가장 좋았으며, 발병환경 조사 결과 3$0^{\circ}C$에서 18시간 이상 습전시간이 유지될 때 발병이 높아, 고온과 식물의 긴 습전기간이 발병량의 증가를 가져오는 요인이었다. 또한 국내 품종들을 대상으로 오이갈색무늬병에 대한 감수성과 저항성 품종들을 선발하였다.

• Archives of Plastic Surgery
• /
• 제44권5호
• /
• pp.361-369
• /
• 2017

As the popularity of fat grafting research increases, animal models are being used as the source of pre-clinical experimental information for discovery and to enhance techniques. To date, animal models used in this research have not been compared to provide a standardized model. We analyzed publications from 1968-2015 to compare published accounts of animal models in fat grafting research. Data collected included: species used, graft characteristics (donor tissue, recipient area, amount injected, injection technique), time of sacrifice and quantification methods. Mice were most commonly used (56% of studies), with the "athymic nude" strain utilized most frequently (44%). Autologous fat was the most common source of grafted tissue (52%). Subcutaneous dorsum was the most common recipient site (51%). On average, $0.80{\pm}0.60mL$ of fat was grafted. A single bolus technique was used in 57% of studies. Fat volume assessment was typically completed at the end of the study, occurring at less than 1 week to one year. Graft volume was quantified by weight (63%), usually in conjunction with another analysis. The results demonstrate the current heterogeneity of animal models in this research. We propose that the research community reach a consensus to allow better comparison of techniques and results. One example is the model used in our laboratory and others; this model is described in detail. Eventually, larger animal models may better translate to the human condition but, given increased financial costs and animal facility capability, should be explored when data obtained from small animal studies is exhausted or inconclusive.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.307-316
• /
• 2004

This study examined the cause of the wrinkle defect which is frequently encountered in wire rod rolling of low carbon steel$(C0.08\~0.13wt.\%)$. Even a small defect on the surface of rolled bars can easily develop into fatal cracks during cold heading process of low carbon steel, and it is therefore necessary to minimize inherent defects on the surface of hot rolled bars. Hot rolling process of low carbon steel was analyzed to identify the cause of the wrinkle defect in conjunction with FE analysis. The integrated analysis revealed that the wrinkle defect initiated in the first stage of rolling, and it was at the billet edge where severe deformation and drastic temperature drop were present. To elucidate the micro-mechanical mechanism of the wrinkle defect, hot compression tests were carried out at various temperatures and strain rates using Gleeble-3800. The surface profile of the each other compressed specimens was compared, and rough surface lines were observed at relatively low temperatures. Those surface defects can develop into wrinkles during multi-pass rolling. To control the wrinkle defect in rolling, it is necessary to design an adequate caliber which can minimize the loss of ductility, and thereby prevent flow localization. To use the result of this study fur other steels, the quantitative measure of the wrinkle defect and flow localization parameter should be proposed.

• 대한전자공학회논문지TC
• /
• 제43권1호
• /
• pp.33-40
• /
• 2006

Single phase unidirectional transducer (SPUDT), 리플렉터, 웨이퍼 본딩 패키지로 구성된 표면탄성파 (surface acoustic wave, SAW) 기반 압력센서가 개발되어 졌다. Coupling of Mode (COM) 모델링에 의한 소자의 시뮬레이션 및 최적 설계 변수가 얻어졌다. Finite Element Methods (FEM)를 통해 주어진 압력에 따른 다이어프램 벤딩, 스트레인/스트레스 변화 및 SAW 속도변위가 미리 예측되어졌다. 유출된 최적 설계 변수를 이용 440 MHz SAW 기반 압력센서가 41o YX LiNbO3 기판 위에서 제작되어졌다. 고 S/N 비, 임펄스 리프렉션 피크, 작은 에러 피크가 관찰되어졌다. 측정된 S11 결과는 COM 모델링 및 FEM 시뮬레이션 결과와 일치함을 보였다.

• 한국지반공학회논문집
• /
• 제20권7호
• /
• pp.119-126
• /
• 2004

모형 보강토 옹벽을 실내에 축조하여 벽체의 연속성과 강성이 벽체의 거동 및 안정성에 미치는 영향을 조사하였다. 완전 연속 전면판과 일반적으로 사용되는 블록식 비연속 전면판을 설계하여 모형실험에 적용하였다. 따라서 각각의 전면판에 따라 서로 다른 축조방법과 축조순서가 채택되었다. 모형 보강토옹벽은 상용의 지오그리드 보강재와, 주문진 표준사를 사용하여 강성지반 상에 축조하였으며 토압계, 변위계 및 보강재 상에 부착된 변형율계 등을 사용하여 거동을 추적하였다. 두 벽체에 대한 시험으로부터 연속 강성 벽체를 가진 보강토 옹벽이 일반적인 블록식 전면판 보강토 옹벽에 비해 안정적인 거동을 보임을 확인하였다.

• 한국지반공학회논문집
• /
• 제20권4호
• /
• pp.75-88
• /
• 2004

사질토 지반의 원형수직구에 설치된 흙막이벽에 작용하는 토압은 축대칭 아칭효과로 인하여 평면변형조건의 옹벽에 작용하는 토압보다는 작은 토압이 작용한다. 따라서, 수평 및 연직방향 아칭효과에 의한 토압감소를 고려하고 상재하중, 벽면마찰, 파괴면의 경사각 등 각종 인자의 영향을 적절히 반영하여 원통형 벽체에 작용하는 토압을 예측할 수 있는 토압산정공식이 제안되었다. 제안된 토압공식의 적용성 확인을 위하여 모형실험이 수행되었다. 벽체변위, 벽면마찰, 벽체 형상비 등을 조절할 수 있는 모형실험장치가 개발되었으며, 건조한 모래지반에서 깊이에 따른 벽체변형이 일정한 조건의 모형실험을 통하여 각각의 영향인자가 원통형 벽체에 작용하는 주동토압에 미치는 영향이 분석되었다. 제안된 토압공식은 모형실험에 의한 토압분포와 유사한 경향을 예측하여 만족스러운 결과를 주는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.361-397
• /
• 2017

The unloading effect from excavations can cause the deformation of adjacent tunnels, which may seriously influence the operation and safety of those tunnels. However, systematic studies of the deformation characteristics of tunnels located along side excavations are limited, and simplified methods to predict the influence of excavations on tunnels are also rare. In this study, the simulation capability of a finite element method (FEM) considering the small-strain characteristics of soil was verified using a case study. Then, a large number of FEM simulations examining the influence of excavations on adjacent tunnels were conducted. Based on the simulation results, the deformation characteristics of tunnels at different positions and under four deformation modes of the retaining structure were analyzed. The results indicate that the deformation mode of the retaining structure has a significant influence on the deformation of certain tunnels. When the deformation magnitudes of the retaining structures are the same, the influence degree of the excavation on the tunnel increased in this order: from cantilever type to convex type to composite type to kick-in type. In practical projects, the deformation mode of the retaining structure should be optimized according to the tunnel position, and kick-in deformation should be avoided. Furthermore, two methods to predict the influence of excavations on adjacent tunnels are proposed. Design charts, in terms of normalized tunnel deformation contours, can be used to quantitatively estimate the tunnel deformation. The design table of the excavation influence zones can be applied to determine which influence zone the tunnel is located in.

• 한국미생물·생명공학회지
• /
• 제24권1호
• /
• pp.59-66
• /
• 1996

Virginiae butanolide C(VB-C) is one of the butyrolactone autoregulators, which triggers the productin of virginiamycin in Streptomyces virginiae. To further understand the mechanism of virginiamycin induction, we isolated three mutants from S. virginiae by N-methyl-N'-nitrosoguanidine (NTG) treatment. The characteristics of the three mutants were confirmed as follows: the mutant No. 1 delayed the production of the VB-C, receptor and antibiotics; the mutant No.3 hyperproduced receptor; the mutant No.4 failed to produce the VB-C. The addition of synthetic VB-C couldn't induce the production of antibiotics in the mutant No.1 due to delayed production of receptor, could provoke the production of larger amount of antibiotics than parental wild type strain in the mutant No.3 due to the presence of large amount of receptor, and could induce production of very small amount of antibiotics in the mutant No.4 due to the absence of VB-C. Antimicrobial spectrum and HPLC analysis of the mutant No.1 and No.3 suggested that the VB-C might have a specific ability to induce the production of virginiamycin M and S. These results imply that the VB-C has an ability to trigger the production of virginiamycin under receptor existence in S. virginiae.

• 지질공학
• /
• 제6권2호
• /
• pp.59-64
• /
• 1996

암석 시료가 파괴될 때에 발생되는 AE신호는 미세한 균열 발생시의 갑작스런 변형에너지 해바에 기인한다. 압전 압력형 탐촉자와 다채널 기록장치를 이용하여 AE 신호파를 기록하여 분석하므로 외적인 하중조건과 그에 따른 미세균열의 특징에 대하여 연구하였다. 연구결과 미세균열의 체적은 수 $\mu\textrm{m}^3$ 내지 $150,000\mu\textrm{m}^3$로 산출되어서 그 크기가 넓은 범위로 분포하였고 인장형 미세균열이 대체적으로 전단형 보다 큰 체적을 보였다. 또한, 균열원에서의 에너지 강도는 모드 I 하중조건하에서 발생하는 AE 신호가 혼합모드 조건하에서 발생한 신호보다 약 3배정도 크게 나타났으나,시료가 파괴되는 동안 기록된 AE 신호의 숫자는 반대로 모드 I의 경우가 혼합모드의 25%에 불과하였다. 이러한 사실은 같은 크기의 파괴면을 형성하는데 필요한 에너지 요구량이 대체적으로 동일함을 암시하는 것으로 보인다.

• The Plant Pathology Journal
• /
• 제18권3호
• /
• pp.115-120
• /
• 2002

Xanthomonas axonopodis pv. glycines, the causal agent of bacterial pustule of soybean, induces hypersensitive response (HR) in a non-host plant, hot pepper (Capsicum annuum). A wild-type strain (8ra) and its non-patho-genic mutant (8-13) of X. axonopodis pv. glycines were inoculated into the pepper leaf tissues and their subcellular responses to the bacterial infections were examined by electron microscopy. Intrastructural changes related to HR were found in the leaf tissues infected with 8ra from 8 h after inoculation, characterized by separation of plasmalemma from the cell wall, formation of small vacuoles and vesicles, formation of cell wall apposition, and cellular necrosis. No such responses were observed in the tissues infected with the mutant. In 8ra, the bacterial cells were attached to the cell walls, with the cell wall material dissolved into and appearing to encapsulate the bacterial cells. The bacterial cells later became entirely embedded in the cell wall material. On the other hand, in 8-13, the bacterial cells were usually not attached tightly to the plant cell wall, and no or poor encapsulation of the bacteria by the wall material occurred, although these were encircled by rather loose wall materials at the later stages.