• 한국통신학회논문지
• /
• 제29권6C호
• /
• pp.848-856
• /
• 2004

본 논문은 안정적이며 빠르게 동작하는 화소기반 변이공간영상기반의 스테레오 정합방법을 제안한다. 스테레오영상은 서로 상이한 두 영상이 아니라 수평방향의 이동만이 존재하는 거의 유사한 명상이다. 따라서 큰 정합윈도우를 사용하는 정합방법이 꼭 필요하지는 않다. 그러나, 화소기반은 영상의 잡음에 매우 민감한 특성을 가지므로, 최적경로를 구하기 위한 동적계획법 과정 중, 비용행렬이 구해졌을 때, 그에 따라 함께 생성되는 방향요소들을 검사하여, 잡음에 의해 올바르지 않은 경로를 생성시킬 수 있는 방향들을 제거하는 방법을 사용한다. 실험결과는 제안한 방법이 대부분의 영상잡음에 의한 변이값의 잡음들을 효과적으로 제거하고, 매우 짧은 시간에 좋은 결과의 변이맵을 생성시킴을 보여준다.

• 대한화학회지
• /
• 제42권2호
• /
• pp.143-149
• /
• 1998

마취제를 purple membrane내 bacteriorhodopsin(bR)에 가했을 때 570nm 흡수 띠는 480nm로 이동한다. 마취제에 의해 유도된 분광학적 변화는 가역적이다. 이러한 평형의 겉보기 pKa(6.3)는 bR에 분산된 마취제의 성질에 의존한다. bR의 전기배향 측정은 비교적 작은 전기장에서도 쉽게 달성될 수 있었으며 이때의 배향각도는 60°이었다. 그러나 마취제로 처리한 bR은 이러한 변화를 관측할 수가 없다. 이들 결과들은 마취제에 의해 발색단과 발색단 주변의 단백질 구조의 민감한 변화가 단백질 매트릭스의 전하를 띈 잔기들의 공간적 배향에 영향을 준 것으로 보인다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.272.1-272.1
• /
• 2016

In a three-dimensional topological insulator Bi2Se3, a stress control for band gap manipulation was predicted but no systematic investigation has been performed yet due to the requirement of large external stress. We report herein on the strain-dependent results for Bi2Se3 films of various thicknesses that are grown via a self-organized ordering process. Using small angle X-ray scattering and Raman spectroscopy, the changes of d-spacings in the crystal structure and phonon vibration shifts resulted from stress are clearly observed when the film thickness is below ten quintuple layers. From the UV photoemission/inverse photoemission spectroscopy (UPS/IPES) results and ab initio calculations, significant changes of the Fermi level and band gap were observed. The deformed band structure also exhibits a Van Hove singularity at specific energies in the UV absorption experiment and ab initio calculations. Our results, including the synthesis of a strained ultrathin topological insulator, suggest a new direction for electronic and spintronic applications for the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.197-198
• /
• 2009

This paper describes the Raman scattering characteristics of polycrystalline (poly) 3C-SiC films, which were deposited on the thermally oxidized Si(100) substrate by the atmosphere pressure chemical vapor deposition (APCVD) method according to growth temperature. TO and LO phonon modes to 2.0m thick poly 3C-SiC deposited at $1180^{\circ}C$ were measured at 794.4 and $965.7\;cm^{-1}$ respectively. From the intensity ratio of $I_{(LO)}/I_{(TO)}$ 1.0 and the broad full width half maximum (FWHM) of TO modes, itcan be elucidated that the crystallinity of 3C-SiC forms polycrystal instead of disordered crystal and the crystal defect is small. At the interface between 3C-SiC and $SiO_2$, $1122.6\;cm^{-1}$ related to C-O bonding was measured. Here poly 3C-SiC admixes with nanoparticle graphite with the Raman shifts of D and G bands of C-C bonding 1355.8 and $1596.8\;cm^{-1}$. Using TO mode of 2.0 m thick poly 3C-SiC, the biaxial stress was calculated as 428 MPa.

• International Journal of Quality Innovation
• /
• 제7권3호
• /
• pp.107-115
• /
• 2006

Control charts are important tools of statistical quality control. In 1956, Duncan first proposed the economic design of $\bar{x}-control$ charts to control normal process means and insure that the economic design control chart actually has a lower cost, compared with a Shewhart control chart. An moving average (MA) control chart is more effective than a Shewhart control chart in detecting small process shifts and is considered by some to be simpler to implement than the CUSUM. An economic design of MA control chart has also been proposed in 2005. The weaknesses to only the economic design are poor statistics because it dose not consider type I or type II errors and average time to signal when selecting design parameters for control chart. This paper provides a construction of an economic-statistical model to determine the optimal parameters of an MA control chart to improve economic design. A numerical example is employed to demonstrate the model's working and its sensitivity analysis is also provided.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.190-197
• /
• 1999

Electronic speckle contouring(ESC) is the optical method for measuring shape by using fringe-projection techniques in electronic speckle pattern interferometry. It has the advantage of being non-contacting and can also give a field view of the surface under investigation. Fringes in ESC represent the difference in depth along the view direction between the master wavefront and the test component. The contour maps of three-dimensional diffuse objects are obtained by small shifts of optical fiber carrying the dual-object-beams and 4-frame phase shift. We proposed the contouring method by shifting the collimated illumination beams through optical fiber in order to obtain the contour fringe patterns. And also, we performed addition of incremental addition of images and experiments based on it. we obtained both quantitative increment without decorrelation effect and qualitative improvement by reducing the noise of contour fringes.

• 대한산업공학회지
• /
• 제25권1호
• /
• pp.67-74
• /
• 1999

Market share is one of the most important measures in the valuation of prospering firm. It plays a role of composite indicator for the competitiveness of firm. So, the understanding of the underlying process of market share is inevitable factor for the econometricians and the business engager. Lately, the Korean Economy has been placed in the control of IMF. This shock will cause a lot of influence over the domestic economy. The idea that the information about the past shock-response experience will do us good for dealing with this kind of economic shocks is not new. Among numerous markets, we pay attention to the durable goods market, especially automobile market. The automobile market has large repercussion effect over the domestic economy on the issue of both national employment and technology integration. We divided the Korean automobile market into three segments: small, medium, and large-sized car, while each proportion of these segments has been changing slowly. We propose a Bayesian approach to detect and forecast structural changes in time series of the market shares in the domestic automobile market, especially for level shifts and drift changes, and compare the empirical results with other existing approaches.

• 품질경영학회지
• /
• 제32권4호
• /
• pp.252-264
• /
• 2004

Variable sampling Interval (VSI) control charts vary the sampling interval according to value of the control statistic while the sample size is fixed. It is known that control charts with 2-state VSI scheme, which uses only two sampling intervals, give good statistical properties. Variable sample size (VSS) control charts vary the sample size according to value of the control statistic while the sampling interval is fixed. In the VSS scheme no optimal results are known for the number of sample sizes. It is also known that the variable sampling rate (VSR) $\bar{X}$ control chart with 2-state VSS and 2-state VSI scheme leads to large improvements In performance over the fixed sampling rate (FSR) $\bar{X}$ chart, but the optimal number of states for sample size Is not known. In this paper, the VSR Χ charts with multi-state VSS and 2-state VSI scheme are designed and compared to 2-state VSS and 2-state VSI scheme. The multi-state VSS scheme is considered to, achieve an additional improvement by switching from the 2-state VSS scheme. On the other hand, the multi-state VSI scheme is not considered because the 2-state scheme is known to be optimal. The 3-state VSS scheme improves substantially the sensitivity of the $\bar{X}$ chart especially for small and moderate mean shifts.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제12권2호
• /
• pp.31-39
• /
• 2006

Much has changed in the healthcare field since the beginning of the industrial age. In the healthcare field changes are occurring so rapidly and dramatically that yesterday's paradigm will not be tomorrow's paradigm, creating the need above all else to stay fluid and flexible as strategies(included healthcare architecture planning) for the future are developed. The purpose of this study is to analyze the latest architectural trends of general hospital outpatient department based on the healthcare environment changes in Korea. The major healthcare environment change is to change the object of hospital's healthcare services from inpatient to outpatient. In conclusion, the first, medical faculties of outpatient department are subdivided specialized small faculty. The second, clinic systems for medical examination and treatment of specific disease are activated in the most outpatient department. The third, specialized medical centers for chronical disease(Cancer, Cardiac etc.) control are arranged in existed outpatient department or freestanding facility. Specialized medical center for preventive medicine is regionally decentralized for corresponding with the healthcare paradigm shifts.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.37-43
• /
• 2002

Electronic speckle contouring(ESC) based on electronic speckle pattern interferometry is the optical method for measuring object shape by using fringe-projection techniques. This method has the advantages of being non-contact, non-destructive and a whole-field measurement of the surface under investigation. Fringes in ESC represent the difference in depth along the view direction between the master wavefront and the test component. The contour maps of three-dimensional diffuse objects can be obtained by small shifts of optical fiber carrying the dual-object-beams and 4-frame phase shifting. In this study we proposed the contouring method by shifting the collimated illumination beams through optical fiber in order to obtain the contour fringe patterns. And also, we performed the addition of incremental images through the geometrical analysis to obtain the contour fringe interval when we performed the incremental addition of images and experiments based on this method. We obtained both quantitative increment without decorrelation effect and qualitative improvement by reducing the noise of contour fringes.