• 교육시설
• /
• 제18권5호
• /
• pp.33-38
• /
• 2011

• Steel and Composite Structures
• /
• 제7권4호
• /
• pp.339-354
• /
• 2007

Arched Corrugated Steel Roof (ACSR) is a kind of thin-walled steel shell, composing of arched panels with transverse small corrugations. Four full-scale W666 ACSR samples with 18m and 30m span were tested under full and half span static vertical uniform loads. Displacement, bearing capacities and failure modes of the four samples were measured. The web and bottom flange in ACSR with transverse small corrugations are simplified to anisotropic curved plates, and the equivalent tensile modulus, shear modulus and Poisson's ratio of 18m span ACSR were measured. Two 18 m-span W666 ACSR samples were analyzed with the Finite Element Analysis program ABAQUS. Base on the tests, the limit bearing capacity of ACSR is low, and for half span loading, it is 74-75% compared with the full span loading. When the testing load approached to the limit value, the bottom flange at the sample's bulge place locally buckled first, and then the whole arched roof collapsed suddenly. If the vertical loads apply along the full span, the deformation shape is symmetric, but the overall failure mode is asymmetric. For half span vertical loading, the deformation shape and the overall failure mode of the structure are asymmetric. The ACSR displacement under the vertical loads is large and the structural stiffness is low. There is a little difference between the FEM analysis results and testing data, showing the simplify method of small corrugations in ACSR and the building techniques of FEM models are rational and useful.

• Steel and Composite Structures
• /
• 제8권5호
• /
• pp.361-388
• /
• 2008

The Eurocode 4 presents some negative aspects in the design of composite slabs by the m-k Method or the Partial Connection Method. On one hand, the component chemical adherence is not accounted for in the connection between the profiled steel sheet and the concrete. On the other hand, the application of these methods requires some fitting parameters that must be determined by full scale tests. In this paper, the Eurocode 4 methods are compared with a method developed at the Federal Polytechnic School of Lausanne, based on pullout tests, which can be a valid alternative. Hence, in order to calculate the necessary parameters for the three methods, several tests have been performed such as the full scale test described in Eurocode 4 and pull-out tests. This last type of tests is of small dimensions and implicates lower costs. Finally, a full-scale test of a steel-concrete composite slab with a generic loading is presented, with the goal of verifying the analytical formulation.

• Communications for Statistical Applications and Methods
• /
• 제10권1호
• /
• pp.145-151
• /
• 2003

We shall propose several estimators for the scale parameter in the uniform distribution when the parameter is functions of a known exposure level, and obtain expectations and variances for their proposed estimators. And we shall compare numerically relative efficiencies for proposed estimators of the scale parameter in the small sample sizes.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.75-75
• /
• 2022

Traditional agriculture mostly focused on activity in the field, but current agriculture faces problems such as reduction of agricultural inputs, labor shortage and so on. Accordingly, traditional agricultural experiments generally considered the simple treatment effects, but current agricultural experiments need to consider the several and complicate treatment effects. To analyze such several and complicate treatment effects, data collection has the first priority. Remote sensing is a quite effective tool to collect information in agriculture, and recent easier availability of UAVs (Unmanned Aerial Vehicles) enhances the effectiveness. LAI (Leaf Area Index) is one of the most important information for evaluating the condition of crop growth. In this study, we utilized UAV with multispectral camera to evaluate plant-based LAI of sweetcorn in a small-scale field experiment and discussed the feasibility of a new experimental design to analyze the several and complicate treatment effects. The plant-based SR measured by UAV showed the highest correlation coefficient with LAI measured by a canopy analyzer in 2018 and 2019. Application of linear mix model showed that plant-based SR data had higher detection power due to its huge number of data although SR was inferior to evaluate LAI than the canopy analyzer. The distribution of plant-based data also statistically revealed the border effect in treatment plots in the traditional experimental design. These results suggest that remote sensing with UAVs has the advantage even in a small-scale experimental plot and has a possibility to provide a new experimental design if combined with various analytical applications such as plant size, shape, and color.

• 정보교육학회논문지
• /
• 제6권2호
• /
• pp.154-162
• /
• 2002

소인수학급에서는 교육과정의 획일적인 운영으로 인하여 아동들은 점점 학습에 흥미를 잃어가고, 학습활동에도 소극적인 태도로 임하는 문제점이 있다. 협동수업에 관한 WBI 모형들이 많이 연구되고 설계되었지만, 소인수학급의 특성에 맞는 WBI 협동수업 모델에 대한 연구는 미흡한 실정이다. 본 연구에서는 소인수 학급간의 연계를 통해 교사가 수업에 참여하며, 장기적으로 학생들의 학습태도에 변화를 줄 수 있는 WWW를 기반으로 한 협동수업 모델인 WIEZ를 설계하여 구현하였다. 현재 WIEZ는 경남지역의 3개 학교를 대상으로 교사들이 이 시스템 내에서 수업을 설계하고 학생들이 모둠을 나누어 참여하는 형식으로 시험 운영 중에 있다.

• 한국직업건강간호학회지
• /
• 제9권1호
• /
• pp.56-61
• /
• 2000

This study was done in an attempt to reveal those factors interfering with the observation study. Three trained research assistants collected data by observing the two occupational health nurses working in the small scale enterprises on the 3rd and 10th of February, 1999. The first observation was performed on the 3rd of February without observation guidance. Guidance was given during the second observation on the 10th of February. These data were compared between reporters in nursing services of 'Workplace visiting', 'Health counselling' and 'Blood pressure checking' according to nursing time and frequency. These areas were chosen because these activities were regarded as clearly identifiable by observers in contrast to the other performances. The data showed inconsistency between reporters. However, they were reduced when reporters observed nurses with guidance, although there were still minor differences between data in time and frequency. Discussions were carried out to find possible reasons for these differences. The causes were mainly attributed to the difficulty in workplace conditions to observe, the work specificity of nurses visiting each workplace and the delicate situation between nurses and observers when reporters were travelling in the nurse's car. Therefore, the results suggest that the observation method applied to the nursing service research at small-scale enterprises should be more concerned about the selection of appropriate workplace and operational definition of nursing activity in order to more precisely measure nurses' attitudes.

• 조명전기설비학회논문지
• /
• 제23권11호
• /
• pp.61-68
• /
• 2009

A Microgrid is a private small-scale power system composed of distributed energy resources (DERs), storage devices and loads. And it is expected that the Microgrid will come into wide use in the near future. For this, the establishment of the Microgrid operation methodology is a very important problem. Especially, the Microgrid is greatly different from existing private small-scale power systems because of the multiple participants. Therefore, the Microgrid operation considered various requirements according to multiple participants is more complicated than the operation of existing private small-scale power systems. In this paper, Microgrid operation methodology based on a market environment is suggested. Through case studies, the effectiveness of the suggested methodology is verified.

• 열처리공학회지
• /
• 제33권2호
• /
• pp.72-79
• /
• 2020

To improve the mechanical properties of most structural materials for industrial applications, the control of microstructure is essential by heat treatment process or plastic deformation process. Since the mechanical behavior of structural materials is significantly influenced by their microstructure, it is inevitably preceded to understand the relationship between microstructure and strengthening mechanisms of materials which can be easily changed by heat treatment. In this regard, the nanoindentation test is useful technique for analyzing the influence of the localized microstructural change on small-scale mechanical behavior of various structural materials. Here, the interesting studies performed on various heat-treated materials are reviewed with focus on micromechanical properties obtained by nanoindentation, which are reported in the available literature.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.186-191
• /
• 2001

A crack with electrically impermeable surfaces in an electrostrictive material subjected to uniform electric loading is analysed. The effect of electric yielding on stress intensity factor is investigated by using a small scale yielding model and a strip yield zone model. Complete forms of electric fields and elastic fields are derived by using complex function theory. The electrical yield zone shapes for two models are different each other. The two models, however, predict similar yield zone sizes under the small scale yielding conditions. It is found that the influence of electric yielding on the stress intensity factor is insensitive to the modeling of the electrical yield zone shape.