• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.4
• /
• pp.319-326
• /
• 2014

Accurate estimation of the robot's position has an important role in autonomous navigation. Odometry is one of the most widely used techniques for mobile robot positioning. However, odometry has a well-known drawback that the position errors are accumulated when the travel distance increases. The UMBmark method is the conventional odometry calibration scheme for two wheel differential mobile robots. In the UMBmark method, the approximations for small angles are used in order to simplify the calculations. In this paper, we propose the new calibration scheme by using experimental orientation errors. Kinematic parameters can be calculated accurately without approximations by using experimental orientation errors. The numerical simulation and experimental results show that the odometry accuracy can be improved by the proposed method.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.323-326
• /
• 1996

In this paper, we propose a new method of the communication system for cooperative behavior and control in a collective autonomous mobile robots. A communication function among the collective robots is essential to intelligent cooperation. In general, global communication is effective for small number of robots. However when the number of robot goes on increasing, this becomes difficult to be realized because of limited communication capacity and increasing amount of information to handle. And also the problems such as communication interference and improper message transmission occur. So we propose local communication system based on infrared sensor to realize the cooperative behavior and control as the solution of above problem. It is possible to prevent overflow of information and exchange of complex information by combining communicate a specific robot. At last we verify the effectiveness of the proposed communication system from example of cooperative behavior.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.305-314
• /
• 2015

The work presented in this paper deals with a navigation problem for multiple mobile robot system in unknown indoor environments. The environment is completely unknown for all the robots and the surrounding information should be detected by the proximity sensors installed on the robots' bodies. In order to guide all the robots to move along collision-free paths and reach the goal positions, a navigation method based on the combination of a set of primary strategies has been developed. The indoor environments usually contain convex and concave obstacles. In this work, a danger judgment strategy in accordance with the sensors' data is used for avoiding small convex obstacles or moving objects which include both dynamic obstacles and other robots. For big convex obstacles or concave ones, a wall following strategy is designed for dealing with these special situations. In this paper, a state memorizing strategy is also proposed for the "infinite repetition" or "dead cycle" situations. Finally, when there is no collision risk, the robots will be guided towards the targets according to a target positioning strategy. Most of these strategies are achieved by the means of fuzzy logic controllers and uniformly applied for every robot. The simulation experiments verified that the proposed method has a positive effectiveness for the navigation problem.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.12
• /
• pp.1145-1151
• /
• 2013

Kinematic modeling is a prerequisite for motion planning and the control of mobile robots. In this paper, we proposed a new method of kinematic modeling for a type of mobile robot based on differential motion transformation. The differential motion implies a small translation and rotation in three-dimensional space in a small time interval. Thus, transformation of the differential motion gives the velocity relationship, i.e., Jacobian between two coordinate frames. Since the theory of the differential motion transformation is well-developed, it is useful for the systematic velocity kinematic modeling of mobile robots. In order to show the validity for application of the differential motion transformation, we obtained velocity kinematic models for a type of exemplar mobile robot including spherical ballbots.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.3
• /
• pp.284-294
• /
• 2008

In this paper, we describe an implementation of small mobile robot that can be used at research and application of mobile sensor networking. This robot that will constitute the sensor network, as a platform of multi-robot system for each to be used as sensor node, has to satisfy restrictions in many aspects in order to perform sensing, communication protocol, and application algorithms. First, the platform must be designed with a robust structure and low power consumption since its maintenance after deployment is difficult. Second, it must have flexibility and modularity to be used effectively in any structure so that it can be used in various applications. Third, it must support the technique of wireless network for ubiquitous computing environment. At last, to let many nodes be scattered, it must be cost-effective and small. Considering the above restrictions of the mobile platform for sensor network, we designed and implemented robots control the current of actuator by using additional circuit for power efficiency. And we chose MSP430 as MCU, CC2420 as RF transceiver, and etc, that have the strength in the aspect of power. For flexibility and modularity, the platform has expansion ports. The results of experiments are described to show that this robot can act as sensor node by RF communication process with Zigbee standard protocol, execute the navigation process with simple obstacle avoidance and the moving action with RSSI(Received Signal Strength Indicator), operate at low-power, and be made with approx. $100.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.343-345
• /
• 2007

This paper proposes an inertial navigation system(INS) with which a biped robot can determine his position, velocity, posture, etc. The proposed system provides the information of robots independently without using any outer signals. The defect of the algorithm is the en'or accumulation as the robot increases the mobile range. However, in this application the problem is not so critical because the working space is small and operation period of the robots is relatively short. With the proposed INS system biped robots obtain enhanced intelligence to execute their tasks. The structure and theoretical backgrounds are utilized to design the INS system. The method for application of INS system to biped robots has been illustrated.

• The Journal of Korea Robotics Society
• /
• v.17 no.1
• /
• pp.86-92
• /
• 2022

Utilization of small robots in psychology and biology provides a new breakthrough in understanding the neurobiological mechanisms of various animal behavior. The expansion of robot use in animal research is partly due to increased availability of economically plausible mobile robots and also due to the current shift in animal research toward more ecologically valid experiments. Ground-breaking experimental findings are expected when the behavioral variables are manipulated in more natural situations. In addition, the results from laboratory could be generalized more easily with added ecological validity. The current paper attempts to review a wide range of applications of animal robots used to study animal behavior and to highlight major advantages and limitations. In particular, this review focuses more on the psychological impact of animal robots than engineering details about their structure and operation. Finally, this review will provide some practical considerations when employing robots in animal experiments.

• Journal of Sensor Science and Technology
• /
• v.17 no.1
• /
• pp.53-60
• /
• 2008

Localization is the most important functions in mobile robots. There are so many approaches to realize this essential function in wheel based mobile robots, but it is not easy to find similar examples in small underwater robots. It is presented the sonar localization system using ubiquitous sensor network for a fish robot in this paper. A fish robot uses GPS and sonar system to find exact localization. Although GPS is essential tool to obtain positional information, this device doesn't provide reasonable resolution in localization. To obtain more precise localization information, we use several Ubiquitous Sensor Networks (USN) motes with sonar system. Experimental results show that a fish robot obtains more detailed positional information.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.179-186
• /
• 2006

A user interface that connects a user to intelligent robots needs to be designed for executing them efficiently. In this paper, it is analyzed how to organize a mobile terminal based user interface according to the function and level of autonomy of intelligent robots and the user interface of PDA (Personal Digital Assistant) and smart phone is developed for controlling intelligent robots remotely. In the image-based user interface, a user can see the motion of a robot directly and control the robot. In the map-based interface, the quantity of transmission information is reduced and therefore a user can control the robot with a small delay of transmission time.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.2
• /
• pp.53-63
• /
• 2018

A novel real-time path planning algorithm suitable for implementation on a small mobile robot is introduced. The algorithm can be used as the basis for mapping unknown or partially known environments and is tested in a specially developed simulation environment in Matlab(R). Simulations results are presented demonstrating that the algorithm can readily be implemented to allow a small robot to navigate in various unknown and partially known environments. The main characteristics of the algorithm include simplicity, ease of implementation, speed, and efficiency, thereby being especially suitable for small robots. Furthermore, for partially known environments, another algorithm is proposed to predefine an optimal path taking into account information provided regarding the environment.