• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.104-111
• /
• 2017

This research focuses on simulation and visualization of flow field characteristics inside a centrifugal pump. The 3D numerical analysis was carried out by using a numerical CFD tool, addressing a Reynolds Average Navier-Stock code with a standard k-${\varepsilon}$ two-equation turbulence model. The simulation accounts for friction head loss due to rough walls at suction, impeller, discharge areas and volumetric head loss at impeller wear ring. A comparison of performance curves between simulation and experimentation is included, and it reveals a same trend of those results with a small difference of maximum 5 %. At best efficiency point, velocity vectors are smooth but it changes significantly under off-design point, a strong recirculation appears at the outlet of impeller passages near tongue area. A relatively uniform preassure distribution was observed around the impeller in despite of the tongue. Within the volute, because of its geometry, spiral vortexes formed, proving that the flow field in this region was relatively turbulent and unsteady.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.622-627
• /
• 2017

In this study, the numerical analysis of propellant supply manifold of a sub-scale model combustor with the same combustion and acoustic resonance conditions as the real combustor was carried out. The analysis of the results is based on the shape of the manifold and the number and type of inflow channels. The manifold form of the main propellant was rounded so that the recirculation area was small and easy to manufacture. The liquid oxygen mainfold included a distributor to uniformly supply the flow, and since the kerosene manifold was directly in contact with the flame side, the inflow channel was formed at a radial $360^{\circ}$ so as to minimize the recirculation region. The liquid nitrogen manifold was configured as a radial inflow channel to reduce the velocity difference near the injector.

• Journal of Preventive Medicine and Public Health
• /
• v.9 no.1
• /
• pp.39-47
• /
• 1976

The organized community is the one of the best system for the effective public health administration, and a model area was selected for the study to see what would be achieved when a certain small community is placed under the special public health control based on the family unit. The 178 families involved total of 875 populations. The rate of vaccination with B.C.G. among 191 infants and children could be increased upto 100.0% from 72.5% of the time when the basic study was performed after 8 months period of this study; 99.0% from 47.1% with D.P.T.; 96,9% from 71.7% against smallpox; 83.2% from 69.1% against poliomyelitis; but only 25,7% from 21.5% against measles. The status of family planing was 36.8% among 155 women of possible conception at the time of the basic research. And, at the end of this study, the number of women utilizing one of the methods of contraception for family planning were increased upto 52.9% among the same number. The most frequently utilized method was 34.1% of oral pills followed by 30.5% of intrauterine device; but both of which had higher rate of interruption of use because of the complications, 14.3% and 16.0% respectively. The 10 pregnant women at the time of basic research experienced normal deliveries during the period of study and they had received pre and postnatal health care through this health center. The status of oral hygiene, pulmonary tuberculosis control, and parasitological examination were also reported as well as the cases with diseases seen among the population and vaccinations performed against other infectious diseases. The stress on discussion was placed upon the effectiveness of public health administration when it is undergone on the individual family unit to achieve the best results. However, the shortness of both personnel and material resources were considered to be the one of the major difficulties retarding the generalization of the idea obtained through this study based on family unit public health administration.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.4
• /
• pp.404-412
• /
• 1994

On July 12. 1993 at 22 : 17 local time (-9h. KST). an earthquake of surface magnitude (MS) 7.6 occurred on the west coast of the Hokkaido and small of offshore island of Okushiri in the East Sea. A major tsumani was generated and within 2 to 5 minutes, extremely large tsunami waves engulfed the Okushiri coastal area and the central west roast of the Hokkaido. This tsunami caused tremendous casualities and damage. A giant tsunami runup of more than 30 m in height was recorded. The tsunami crossed the East Sea and feeled at 27 sites of the eastern Korean coast during the survey on 17-19, July, 1993. The observed tsunami runup at southern part of the eastern Korean coast were generally weaker than the 1993 Japan Sea Central Earthquake tsunami and varied from 0.8 m to 2.6 m. The Present Paper intends to understand the propagation on this tsunami with the aid of numerical computation model andd computer graphic aided video animation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.7
• /
• pp.1008-1019
• /
• 2007

The purpose of this study was to develop an appropriate jacket pattern for elderly women over sixty years old, providing a good fit and appearance. Results were as follows: The length of the jacket was made long enough to cover the area 22.0cm below the waistline. The waist back length was made 1.7cm longer than the actual size of the waist back length. The armhole length was made 0.5cm longer than B/4, enhacing the appearance and functionality while allowing freer movement of the arms. As for the front and back interscye breadths, the front interscye breadth was made 1.7cm larger than the actual size while the back interscye breadth was only 1.0cm larger, providing the front interscye breadth more space. The bust breadth was made 10.0cm larger than the bust circumference measure(B/4+2.5cm), the waist breadth was made 6.0cm larger than the waist circumference measure(W/4+1.5cm), The hip breadth was made 12.0cm larger than the him circumference measure(H/4+3.0cm). The sleeve length was made 3.0cm larger than the arm length measure, as the sleeve length of a jacket is usually long enough to cover the ulnar styloid. The sleeve width was made 5.0cm larger than the upper arm circumference measure, as the upper arm circumference measure of the model pattern was too large than necessary, worsening the overall appearance. The sleeve cap height was set at AH/4+4.7cm. The wrist circumference of 27.0cm was set, allowing 2/3 and 1/3 for the large sleeve and small sleeve respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.3
• /
• pp.85-94
• /
• 1984

The WILDHABER-NOVIKOV gear, one of the circular arc gears, has the large contact area between the convex and concave profiled mating teeth, moves from one end of the tooth to the other axially making a face contact. Hence it provides a large load capacity than the Involute gear and still satisfying the law of gearing. In order to analyze the gear stress, a photoelastic investigation was carried out. Photo elastic model of the WILDHABER-NOVIKOV gears were made of Araldite CT200 in this investigation. For both the many teeth gear and the few teeth gear segments, External gears of all addendum type WILDHABER-NOVIKOV gear and the involute gear were tested. Included were the models with various profile raddi at the same pressure angle 20 .deg. and module 13.5. The flank stresses and fillet stresses of these gears were observed in each case and compared with those of gears. From this investigation, the following results were obtained. A. In the case of having many teeth gear: As the profile radius is increased, the fillet stresses of the WILDHABER-NOVIKOV gear become the same or less than that of the INVOLUTE gea, and the flank stress becomes smaller than that of the INVOLUTE gear. Therefore the better design condition is satisfied with a large profile radius. B. IN the case of having a few teeth gear: As the profile radius is increased the flank stress of WILDHABER-NOVIKOV gear becomes smaller than that of the INVOLUTE gear, but the fillet stresses become larger than that of the INVOLUTE gear. Therefore the larger design condition is satisfied with small profile radius.

• Journal of KIISE
• /
• v.42 no.7
• /
• pp.846-851
• /
• 2015

Seas and swells are basic wave types in ocean surface simulation and are very important elements in the simulation of ocean background. In this paper, we propose a real-time simulation method, for reproducing realistic seas and swells, to be used in real-time simulators such as ship maneuvering simulators. Seas and swells have different visual properties. Swells have relatively longer wavelengths and round crests compared with seas, therefore they are visualized globally with large meshes and procedural methods. Parameters to illustrate swells are extracted from ocean wave spectra. Conversely, seas have shorter wavelengths and their characteristics are only clearly apparent near to the observation point. Here, we present visualization of seas based on a statistical wave model using ocean wave spectra, which provides realistic results in a reactively small area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.330-336
• /
• 2007

A single pixel photon counting type image sensor which is applicable for medical diagnosis with digitally obtained image and industrial purpose has tern designed with $0.18{\mu}m$ triple-well CMOS process. The designed single pixel for readout chip is able to be operated by single supply voltage to simplify digital X-ray image sensor module and a preamplifier which is consist of folded cascode CMOS operational amplifier has been designed to enlarge signal voltage(${\Delta}Vs$), the output voltage of preamplifier. And an externally tunable threshold voltage generator circuit which generates threshold voltage in the readout chip has been newly proposed against the conventional external threshold voltage supply. In addition, A dark current compensation circuit for reducing dark current noise from photo diode is proposed and 15bit LFSR(Linear Feedback Shift Resister) Counter which is able to have high counting frequency and small layout area is designed.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.11
• /
• pp.271-276
• /
• 2019

Conventional ARIA algorithm which is used LUT based-S-Box is fast the processing speed. However, the algorithm is hard to applied to small portable devices. This paper proposes the hardware design of optimized ARIA crypto-processor based on the modified composite field S-Box in order to decrease its hardware area. The Key scheduling in ARIA algorithm, both diffusion and substitution layers are repeatedly used in each round function. In this approach, an advanced key scheduling method is also presented of which two functions are merged into only one function for reducing hardware overhead in scheduling process. The designed ARIA crypto-processor is described in Verilog-HDL, and then a logic synthesis is also performed by using Xilinx ISE 14.7 tool with target the Xilnx FPGA XC3S1500 device. In order to verify the function of the crypto-processor, both logic and timing simulation are also performed by using simulator called ModelSim 10.4a.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.35-45
• /
• 2006

RIn this paper. we describe real-time parallel processing simulator developed for the use of performance analysis of rolling missiles. The real-time parallel processing simulator developed here consists of seeker emulator generating infrared image signal on aircraft, real-time computer, host computer, system unit, and actual equipments such as auto-pilot processor and seeker processor. Software is developed according to the design requirements of mathematic model, 6 degree-of-freedom module, aerodynamic module which are resided in real-time computer. and graphic user interface program resided in host computer. The real-time computer consists of six TI C-40 processors connected in parallel. The seeker emulator is designed by using analog circuits coupled with mechanical equipments. The system unit provides interface function to match impedance between the components and processes very small electrical signals. Also real launch unit of missiles is interfaced to simulator through system unit. In order to use the real-time parallel processing simulator developed here as a performance analysis equipment for rolling missiles, we perform verification test through experimental results in the field.