• 제목/요약/키워드: slump test

검색결과 408건 처리시간 0.026초

고로시멘트를 사용한 고유동 콘크리트의 제조에 관한 실험적 연구 (An Experimental Study on the Manufacturing of High Workable Concrete using Blastfurnace Cement)

  • 최진만;백광섭;차태환;조원기;윤재환
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1994년도 가을 학술발표회 논문집
    • /
    • pp.65-70
    • /
    • 1994
  • The aim of this study is to develop the High Workable Concrete which has not so large slump loss with time using blast-furnace cement and High range water reducing agent. Normal portland cement and blast-furnce cement was used as binders and water-binder ratio were ranging from 34% to 50%. 5 kinds of Superplasticizer and High range water reducing agent were used. Test results show that the blast-furmace cement was much higher flowability than normal portland cement and domestic High rang water reducing and AE agent had very small slump loss than others. The compactability of High Workable Concrete was also confirmed using model wall-form.

  • PDF

초유동 콘크리트의 개발에 관한 기초적 연구 -제 1보 : 모르터의 레올로지 시험 - (A Fundamental Study on development of Ultra-Flow Concrete - part 1. The rheology test of mortar -)

  • 김화중;김재훈;박정민;최신호;이승조;김태곤
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1995년도 봄 학술발표회 논문집
    • /
    • pp.42-47
    • /
    • 1995
  • The flow properties of xoncrete depend on form of fine aggregate, the ratio of voides of fine aggregate and cement paste So, in this study, investigated for the improvement of rheology properties on mortar and paste replaced by Zeolite $\circled1$ The slump flow have to do with correlation on yielding value of mortar respectirely. $\circled2$The increase ratio of strength Mortar and paste 10% replaced by Zeolite was presented significently but the slump flow was decteased stiffly as the increase of plastic viscosity at the ratio of replacement over 10%

  • PDF

레이져 다이오드를 이용한 유동성능 측정장치 개발 (Development of Flowability Measurement Device using Laser Diode)

  • 정재권;김경환;엄주한;최연왕
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.247-248
    • /
    • 2009
  • 고유동 콘크리트는 국내 외 시험성능 규정을 통하여 고유동 콘크리트의 슬럼프 플로 및 500mm 도달시간에 대한 실험 방법이 제시되었다. 하지만 고유동 콘크리트의 유동성능 측정 방법인 슬럼프 플로 시험방법은 사람 개개인 마다 인식 하는 능력이 상이함에 따라 오차가 발생한다. 본 연구에서는 이러한 실험방법에 대한 오차를 보다 정밀화하기 위하여 레이져 다이오드를 통한 실험값의 오차를 없애고자 한다.

  • PDF

석탄재가 혼입된 콘크리트 강도발현에 관한 연구 (An Experimental Study on Strength Development of Concrete Including Fly Ash)

  • 배성용
    • 한국해양공학회지
    • /
    • 제14권3호
    • /
    • pp.66-71
    • /
    • 2000
  • The main objectives of this study are to carried out in order to evaluate strength development of Fly Ash concrete containing various amounts of Fly Ash such as 0%, 10%, 20% and 30%. The experimental variables included in this test program consist of content of Fly Ash, concrete strength and chemical activation. As Fly Ash increases, air content, strength development of concrete and slump loss of normal strength concrete were gradually decreased. The inclusion of Na$_2$SO$_4$increased the short-term strength of concrete that contains Fly Ash. In addition, the strength development of concrete that contains Fly Ash and Na$_2$SO$_4$were improved.

  • PDF

알칼리활성 슬래그 콘크리트의 슬럼프 및 압축강도에 대한 단위결합재량의 영향 (Effect of Unit Binder Content on the Slump and Compressive Strength of Alkali-Activated Slag Concrete)

  • 조아람;양근혁;송진규
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.361-362
    • /
    • 2010
  • 알칼리활성 슬래그 콘크리트의 슬럼프 및 압축강도에 대한 단위결합재량의 영향을 알아보기 위해 6배합의 알칼리활성 슬래그기반 콘크리트가 실험되었다. 주요 변수로는 단위결합재량으로 300, 350, 400 및 550 kg/$m^3$이다. 실험결과 단위결합재량의 증가는 초기 슬럼프를 증가 시켰으며, 압축강도를 증가 시켰다.

  • PDF

Modelling the performance of self-compacting SIFCON of cement slurries using genetic programming technique

  • Cevik, Abdulkadir;Sonebi, Mohammed
    • Computers and Concrete
    • /
    • 제5권5호
    • /
    • pp.475-490
    • /
    • 2008
  • The paper explores the potential of applicability of Genetic programming approach (GP), adopted in this investigation, to model the combined effects of five independent variables to predict the mini-slump, the plate cohesion meter, the induced bleeding test, the J-fiber penetration value, and the compressive strength at 7 and 28 days of self-compacting slurry infiltrated fiber concrete (SIFCON). The variables investigated were the proportions of limestone powder (LSP) and sand, the dosage rates of superplasticiser (SP) and viscosity modifying agent (VMA), and water-to-binder ratio (W/B). Twenty eight mixtures were made with 10-50% LSP as replacement of cement, 0.02-0.06% VMA by mass of cement, 0.6-1.2% SP and 50-150% sand (% mass of binder) and 0.42-0.48 W/B. The proposed genetic models of the self-compacting SIFCON offer useful modelling approach regarding the mix optimisation in predicting the fluidity, the cohesion, the bleeding, the penetration, and the compressive strength.

콘크리트 충전 강관 기둥의 시공에 관한 연구 (Mock-up Tests of Concrete Filled Steel Tubular Columns)

  • 이덕찬;최진만;이도헌;김훈;김진철;박연동
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1996년도 봄 학술발표회 논문집
    • /
    • pp.382-387
    • /
    • 1996
  • Three concrete filled steel tubular columns with six inner diaphrams are constructed and tested under field conditions. The size and shape of three columns are exactly same. The cross section is $40\times40cm$, and the height is 9m. Each column is constructed with normal concrete, CFST concrete, and high flowing concrete, respectively. Concrete is pumped into bottom parts of steel tubular columns from a concrete pump on the ground. Test data indicate that the slump flow of the concrete place in the top of the column is lower than that of the concrete before pumping by about 10~20cm. Slump flow loss of high flowing concrete caused by pumping is high compared to the other concretes. Concrete pump pressure of high flowing concrete is somewhat higher than that of CFST concrete.

  • PDF

매립토층에서 CGS에 의한 지반개량특성에 관한 연구 (Characteristics of Ground Improvement by Compaction Grouting System in Filled Ground)

  • 천병식;여유현;정영교;정완균;정의원;김우종
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.425-432
    • /
    • 2001
  • Compaction Grouting System, the method which makes ground compact by injection of low slump mortar, Is widely used for reinforcement of soft ground, restoration of structures happened differential settlement, underpinning and restoration of damaged dam core. The quantitive analysis of ground improvement for this method has not performed yet. So, design parameters about thls method must be studied through performance of CGS in various types of soil to make CGS adaptable widely. In this study PBT, SPT and field density test were performed for analysis of the characteristics of ground improvement and pressuremeter and inclinometer were installed for analysis of the characteristics of compaction in adjacent ground. In this paper, denoted much effects for filled ground that increasing of the bearing capacity, confirming the displacement of adjacent ground and the effective radius of injection.

  • PDF

부순모래의 미립분 함유량 및 입형이 콘크리트의 특성에 미치는 영향에 관한 연구 (A Study on the Influnence of the Properties of Concrete on Powder Content and Shape of Crushed Sand)

  • 이진규;윤기원;임종민;이종태;김성식;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1996년도 가을 학술발표회 논문집
    • /
    • pp.17-23
    • /
    • 1996
  • The objective of this study is to present the reference data about the influence of concrete properties using crushed sand, according to the change of powder content and grain shape. From the test results. We obtained that as powder content is increased, sand aggregate ratio, water content and S.P/C are increased in mixing design of concrete. The more powder content is the less slump and air content loss are decreased in fresh state, but the higher compressive strength and drying shrinkage are increased in hardened concrete state. As grain shape become round, water content is decreased in mixing design of concrete. And also, loss of slump and air content in fresh state, compressive strength in hardened state are increased.

  • PDF

굳지 않은 모르타르의 채널 플로와 레올로지 특성의 상관관계 (Correlation between Channel-Flow Test Results and Rheological Properties of Freshly Mixed Mortar)

  • 신태용;이진현;김재홍;김명규
    • 한국산학기술학회논문지
    • /
    • 제17권7호
    • /
    • pp.237-244
    • /
    • 2016
  • 모르타르를 포함한 건설재료의 작업성은 시공 품질을 결정짓는 중요한 요소 중 하나이다. 콘크리트 등 건설재료의 작업성을 정량적으로 표현할 수 있는 레올로지 특성은 상용화된 레오미터를 통해 측정할 수 있지만, 경제적 또는 공간적 제약으로 인해 실제 시공현장에서의 사용에는 한계가 있다. 많은 건설현장에서는 콘크리트 또는 모르타르의 작업성을 평가하기 위해 슬럼프 플로 시험 등을 통해 정성적으로 재료의 시공성능을 평가하고 있다. 이 논문에서는 시공현장에서 간편하게 모르타르의 레올로지 특성을 측정할 수 있는 채널 플로 시험과 레올로지 특성과의 상관관계식을 제안하고자 한다. 이를 위해서 VOF기법을 이용한 유동 해석을 진행하였으며, 유동 시뮬레이션 결과를 로그함수 모델로 일반화하여 채널 플로 길이와 정지시간을 데이터베이스화 하였다. 수립된 데이터베이스를 기준으로 최소 자승법을 이용한 회귀분석을 진행하였고, 결과적으로 6개의 매개변수로 구성된 모르타르의 채널 플로 시험 결과와 레올로지 특성의 상관관계식을 도출하였다. 또한, 상용 레오미터로 측정한 레올로지 특성과 채널 플로 실험결과로부터 예측된 레올로지 특성을 비교검증 함으로써 제안된 상관관계식의 현장적용 가능성을 확인하였다.