• Journal of information and communication convergence engineering
• /
• 제16권3호
• /
• pp.197-202
• /
• 2018

This paper reveals the impact of the insertion of electromagnetic band gap (EBG) structures on the performance of circularly polarized (CP) patch-slot antenna with offset slot. Several optimizations are necessary to precise physical parameters in the aim to fix the resonance frequency at 3.2 GHz. The proposed antenna possesses lightweight, simplicity, low cost, and circular polarization ensured by two feeding sources to permit right-hand and left-hand circular polarization process (RHCP and LHCP). The measured results compared with simulation results of the proposed circularly polarized EBG antenna with offset slot show good band operations with –10 dB impedance bandwidths of 9.1% and 36.2% centered at 3.2 GHz, which cover weather radar, surface ship radar, and some communications satellites bands. Our investigation will confirm the simulation and experimental results of the EBG antenna involving new EBG structures.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.154-157
• /
• 1999

Photonic Slot Routing(PSR) is a promising approach to solve the fundamental scalability problem of all-optical packet switched WDM networks. In photonic slot routing, packets destined for the same subnetwork are aggregated to form a photonic slot which is jointly routed as a single unit of information through the network. The relative location of the nodes from bridge may cause to fairness problem in the unidirectional WDM ring network based on PSR. As photonic slots from different subnetworks can originate contentions at the bridge, packets may be dropped and retransmitted. Thus we evaluated the performance of PSR based WDM ring network in the point of fairness for each node and slot contentions at the bridge. Simulation results show that the PSR based WDM ring requires a slot access mechanism to guarantee the transmission fairness and efficient switch architecture to resolve slot contention at the bridge.

• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.38-43
• /
• 2006

A slot cut in end milling processes is one of the laborious works because the cutting force is likely to deflect the tools excessively, then to make large errors or to fracture the tool. This difficulty is owing to the poor stiffness of slender shaped end mills. Though, in most cases, additional finish cuts are followed after rough cuts, the accuracy of rough cuts is still important because it affects the final accuracy after finish cuts and productivity. The accuracy in slot cuts depends on the tool stiffness and the cutting conditions including depth of cut and feed. In order to meet the desired accuracy, diameter of end mill and cutting allowance have to be selected carefully. This study suggests several guidances for selecting the end mill diameter and the slot cut allowance to improve machining accuracy and productivity in slot end millings. Some experiments were done with the various cutting parameters of tool diameter, depth of cut and feed.

• 경영과학
• /
• 제10권1호
• /
• pp.127-137
• /
• 1993

The blocking probabilities of nx64Kb/s multi-slot calls are generally much higher than that of single slot calls. In order to improve these blocking probabilities of multi-slot calls, we propose a scheme which searches the different numbers of time slots for different types of calls. We analyze the performance of our scheme in a double-buffered time-space-time switching network which accommodates multi-slot calls as well as single-slot calls. The proposed method yields the reduced blocking probabilities, the increased traffic handling capacity and teh reduced CPU processing load, compared with those of the conventional methods.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.175-178
• /
• 2002

In This paper, a microstrip slot antenna is designed and fabricated for wireless LAN at 5.8GHz band. The microstrip slot antenna is fed by CPW and formed the inductively slot and tile capacitively slot. To obtain wideband, the inductively slot is designed at 5.3GHz and the capacitively slot is designed at 5.8GHz. Resonant frequency of the fabricated microstrip slol antenna is 5.BCD, the bandwidth for VS%<1.5 is 29% and the gain is 4.6dB. The 3-dB beamwidth of E-plane and H-plane is 80 “ and 120 ”, respectively

• 한국재료학회지
• /
• 제15권9호
• /
• pp.560-565
• /
• 2005

The objective of this paper is to decide optimal of the slot angle to minimize stress concentration in rotating disc of diamond saw. The fracture phenomena of the slot are discussed by the theoretical and experimental approaches and then some recommendation are presented to prevent the fracture. The focus of this investigation is to evaluation the effect of the slot on stress distribution using optimum design technique and finite element method(FEM) analysis. Stress concentration of the slot with respect to the various parameter of the slot such position, size, number, rotation speed. From the experimental results, when the slot angle of diamond saw is located $8^{\circ}\~12^{\circ}$ from rotating direction, the maximum equivalent stress reduces.

• ETRI Journal
• /
• 제23권1호
• /
• pp.33-38
• /
• 2001

A numerical simulation and an experimental implementation of T-shaped microstrip-fed printed slot array antenna are presented in this paper. The proposed antenna with relative permittivity 4.3 and thickness 1.0mm is analyzed by the finite-difference time-domain (FDTD) method. The dependence of design parameters on the bandwidth characteristics is investigated. The measured bandwidth of twin-slot array antenna is from 1.37 GHz to 2.388 GHz, which is approximately 53.9 % for return loss less than or equal to -10 dB. The bandwidth of twin-slot is about 1.06 % larger than that of single-slot antenna. The measured results are in good agreement with the FDTD results.

• 센서학회지
• /
• 제30권6호
• /
• pp.395-407
• /
• 2021

The effect of the specifications of a silicon-on-insulator vertical slot optical waveguide on the sensitivity of homogeneous and surface sensing configurations for TE and TM polarization, respectively, was systematically analyzed using numerical software. The specifications were optimized based on the confinement factor and transmission power of the TE-guided mode distributed in the slot. The waveguide sensitivities of homogeneous and surface sensing were calculated according to the specifications of the optimized slot optical waveguide.

• 한국전자파학회논문지
• /
• 제23권8호
• /
• pp.950-957
• /
• 2012

본 논문에서는 도파관 슬롯 배열 안테나의 요소로서 구형 도파관 광벽에 위치하고 이중 리지가 장하된 끝이 둥근 소형 슬롯을 제안하였다. 리지 치수를 적절히 조절하면 원하는 주파수에서 슬롯의 공진을 얻을 수 있다. 제안된 슬롯의 공진 길이는 공진 주파수에서 약 $0.26{\lambda}_0$(자유 공간 파장)이다. 제안된 공진 슬롯은 소형이고, 작은 공진 컨덕턴스 그리고 짧으면서도 안정된 공진 길이 등의 장점을 가진다. 부가적으로 슬롯을 도파관 슬롯 배열에 적용할 때 각 슬롯의 특성들이 인접한 슬롯에 의해서 영향을 적게 받는다. 부엽 준위 -20 dB를 가지는 $4{\times}1$ 도파관 슬롯 배열 안테나를 설계, 제작한 후 실험하였다. 측정결과들이 시뮬레이션 결과들과 잘 일치하고, 주파수 9.41 GHz에서 부엽 준위 -15.9 dB, E-평면 반치각 $110.2^{\circ}$, H-평면 반치각 $21.2^{\circ}$이다.

• 대한전자공학회논문지TC
• /
• 제40권11호
• /
• pp.85-92
• /
• 2003

본 논문에서는 5㎓ 대역에서 동작하는 다중 V-슬롯 모양의 마이크로스트립 안테나를 설계하고 제작하였다. 단일 U-슬롯 모양 위에 두 개의 작은 역 U-슬롯 모양을 갖도록 하였으며 접지면과 기판사이에 공기층을 삽입하여 충분한 대역을 얻고자 하였다. 여러 파라메타, 큰 U 슬롯모양 가로 길이, 세로 길이, 너비, 위치 그리고 두 개의 역 U 슬롯 모양 간격, 급전 위치 그리고 공기갭의 두께를 최적화시킨 후에 다중 U-슬롯 모양의 마이크로스트립 안테나가 제작되었으며 제작된 안테나의 측정결과는 다음과 같다. VSWR<2.0에서 20.4%의 대역폭과 5.5㏈i의 이득과 방사패턴을 얻었다.