• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1395-1404
• /
• 1994

유로만곡부의 횡방향 하상경사는 하천형태학적 특성연구와 하도재해방지, 그리고 수공구조물 보호 등에 기초자료를 제공하는 중요한 연구과제이다. 본 연구에서는 연구대상유역 유로만곡부의 횡방향 하상경사를 Odgaard의 모형외 8개의 모형을 선택하여 비교분석한 후 예측하였으며 적합한 모형을 제시하였다. 본 연구에서 비교된 모든 모형들은 곡률반경과 수심에 비례하였고 모형들사이의 차이는 비례계수 K에 있으며 또한 측정된 횡방향 하상경사는 만곡부에서의 최대수심과 평균유속, 그리고 입자 Froude수와 관계가 있었다. 본 연구에서 Sacramento강 만곡부에서 이루어진 Odgaard의 실험자료를 이용하여 횡방향 하상경사모형들을 비교분석한 결과 Odgaard89모형이 실측횡방향 하상경사와 비교적 잘 일치하였다.

• 지질공학
• /
• 제14권4호
• /
• pp.451-460
• /
• 2004

사면안정해석에 일반적으로 이용되는 2차원 한계평형해석에서는 활동면의 강도를 활동면 전체에 동일하게 설정한다. 그러나 사면의 활동면에서 저면부와 가장자리부의 강도는 다른 경우가 대부분이다. 4가지 절취모델을 이용한 3차원 사면안정해석의 결과에 따르면 활동면내에서 가장자리부의 저항력이 사면의 안정성에 크게 영향을 미치는 것으로 나타났다. 3차원 사면안정해석에서 활동면 강도를 저면부와 가장자리부로 구분하여 설정함으로써 지금까지 고려하지 못했던 사면 가장자리부의 전단강도가 사면안정에 미치는 영향을 정량적으로 파악할 수 있었다. 활동 저면부의 저항력이 낮은 경우에는 사면의 측부 절토에 의하여 안전율이 크게 저하되며, 저항력이 높은 경우에는 말단부 절토에 의하여 안전율이 저하되고 두부 절토에 의하여 안전율이 향상된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1315-1323
• /
• 2010

This paper deals with a case study on a unique slope failure in a liner system of a municipal solid waste containment facility during construction because the sliding interface is not the geomembrane/compacted low permeability soil liner (LPSL) but a soil/soil interface within the LPSL. From the case study, it is concluded that compaction of the LPSL should ensure that each lift is kneaded into the lower lift so a weak interface is not created in the LPSL, and the LPSL moisture content should be controlled so it does not exceed the specified value, .e.g., 3% - 4% wet of optimum, because it can lead to a weak interface in the LPSL. In addition, drainage materials should be placed over the geomembrane from the slope toe to the top to reduce the shear stresses applied to the weakest interface, and equipment should not move laterally across the slope if it is unsupported but along the slope while placing the cover soil from bottom to top.

• 한국환경과학회지
• /
• 제13권6호
• /
• pp.505-512
• /
• 2004

This study was attempted to review the information data for minimizing the destruction of environmental naturalness and the visual damage of landscape from road construction by establishing a model of environmental naturalness for national roads in the suburb areas to suggest an answer to a research question, ' hat does decide the environmental naturalness of roadscape?'. We found that 1) The road-side slope showed no statistical significance in the description of environmental naturalness of roadscape, but the fact that the road-side slope from road construction is the destruction of natural topography cannot be overlooked. 2) In terms of the direction of value variations for independent variables, signboard and telegraph post, soundproofing and protection wall, structure, and building acted toward negative (-) direction, while mountains, sky, road trees, fields, and surrounding green including the road-side slope acted toward positive(+) direction. 3) The variable with highest relative contribution to dependent variables among independent variables is building, which has importance as many as 148 times of road-side slope, while the variable road-side slope has the least importance. Building has the importance of 7.22 times, mountains 5.51 times, road trees 2.59 times, surrounding green 2.54 times, structure 2.41 times, signboard and telegraph post 2.37 times, soundproofing and protection wall 2.20 times, and sky 1.32 times of the fields as a standard criterion values 1.

• 한국지반공학회지:지반
• /
• 제6권2호
• /
• pp.47-54
• /
• 1990

사면안정해석의 정확도는 흙의 강도특성과 사면의 기하학적 조건의 파악정도와 해석방법 본말 의 정확도에 지배된다. 그리고 대부분의 사면안정해절방법은 컴퓨터 프로그랙으로작성되어 있다. 국내에서 실용되고 있는 프로그램의 정확성을 비교한 것이다. 비교적 간단한 조건의 각 프로그램으로 얻은 안전률의 차리는 5% 이내이다. 요면에 관한 정확한 타보입수가 가능한 파괴사례 연구에서도 유사한 결과를 얻었다. 그러나 컴퓨터가 찾아낸 임계파괴면과 실제 파괴면은 약간 상리한 경우도 있었다. 이 때에도 두 활동면을 해석하여 구한 안전률 값은 대차 없이 거의 동일하였다. 결국 국내에서 사용되고 있는 사면안정해석 컴퓨터 프로그램은 그 실용성이 인정된다고 할 수 있다.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.134-137
• /
• 2019

A wide-bandwidth current controller is required for fast charging/discharging of super capacitor applications. Peak current mode is generally used to accomplish fast charging/discharging because this mode has fast response characteristics. However, the peak current mode control must have a slope compensation function to restrain sub-harmonics oscillation. The slope must be changed accordingly if the controlled output voltage is varied. However, changing the slope for every changed output voltage is not easy. The other solution, selecting the slope as the maximum value, causes a slow response problem to occur. Therefore, we propose a hybrid mode controller that uses a peak current and a newly specified valley current. Through the proposed hybrid mode control, the sub-harmonic oscillation does not occur when the duty is larger than 0.5 because of the fast response.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.501-506
• /
• 2001

The creep crack growth properties in 3.5NiCrMoV steel were investigated at $550^{\circ}C$ by using CT specimen under constant $C_t$ condition that was held during crack growth of 1mm distance. $C_t$ lely on load line displacement rate and $C^*$ usually increase with crack length though load is reduced in order to maintain constant $C_t$ value as crack growth. Fully coalesced area(FCA) ahead of crack tip tend to increase as $C_t$ increase to the critical value, and after that value FCA decrease. For the tertiary creep stage of crack growth test, the most of displacement is due to the steady state creep, except only small part due to the primary creep and other effects. Therefore, tests were mainly interrupted in the tertiary stage to obtain high value of $C_t$. At constant load and $C_t$ region, crack growth slope was 0.900 and 0.844 each, on the other hand $C^*$ slope was 0.480.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.105-111
• /
• 2001

The creep crack growth properties in 3.3NiCrMoV steel were investigated at 55$0^{\circ}C$ by using CT specimen under constant load and constant Ct condition that was held during crack growth of Imm distance. Ct lelied on load line displacement rate, C＊usually increased with crack length though load is reduced in order to maintain constant Ct value as crack growth and appeared scatter band. At constant load and Ct region, crack growth slope was 0.900 and 0.844 each, on the other hand C＊ slope was 0.480. Fully coalesced area(FCA) ahead of crack tip increased as Ct increase to the critical value, and after that value FCA decreased. For the tertiary creep stage of crack growth test, the most of displacement was due to the steady state creep, except only small part due to the primary creep and other effects. Therefore, tests were mainly interrupted in the tertiary stage to obtain high value of Ct.

• 응용통계연구
• /
• 제6권1호
• /
• pp.79-93
• /
• 1993

회귀모형에 있어서의 Ruppert와 Carroll의 절사 회귀 추정법을 확장하여 회귀 분위수에 의 한 두 개의 두분으로 관측치를 분할하여 각 부분마다 가중치를 달리 부여하는 방법으로 적 합된 L-추정법을 제안하였다. 이 제안된 L-추정법은 특히 비대칭인 오차분포하에서 좋은 효율을 가지고 있었다.

• 음성과학
• /
• 제15권1호
• /
• pp.87-98
• /
• 2008

This study compares the pitch production of children using cochlear implants (CI) with that of children with normal hearing. Twenty subjects from six to eight years old participated in the study. Three kinds of sentences were read and analyzed using Visi-Pitch $\blacktriangleright$(KAY Elemetrics, Model 3300). There were no considerable differences between the two groups regarding pitch, mean fundamental frequency (F0) and pitch range. In the cases of the slope value of F0 and duration, however, there were significant differences. Thus, it is concluded that duration and pitch control can be crucial factors in determining the intonation treatment of the children with cochlear implants.