• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.387-392
• /
• 2005

The research was performed to predict the potential landslide with roughness index. It was known that fractal dimension and surface area index can be represented the topography, specially when the natural slopes were rough or rugged. A test site was selected and fractal dimension and surface area index were calculated from the irregular triangle network. Fractal dimension were ranged between $2.016{\sim}2.046$ and surface area index $1.56E+07{\sim}2.59E+07$. Surface area index increased as fractal dimension increased. Slope stability was calculated by infinite slope stability analysis model and was compared to slope stability by fractal and surface area index. In the result, unsafe zones where slope stability is under 1.1 were $5.11{\sim}6.25%$ for the test site. It can be said that fractal dimension and surface area index are a good index to evaluate the slope stability because when fractal dimension and surface area index are greater, then stability of the site is more unsafe.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.397-402
• /
• 2003

Infiltration of rainfall causes railway embankment to be unstable and may result in failure. Basic relationship between the rainfall and stability of railway embankment are defined to analyze the stability of embankment by rainfall. An experimental study for defining of infiltration rate of rainfall into slope is conducted in the lab. The results of Rainfall infiltration show that rainfall infiltration is not equal to infiltration as like reservoir because rate of rainfall infiltration is controlled by slope angle. Based on these results, boundary condition of rainfall is altered and various numerical analysis are performed. The variation of shear strength, the degree of saturation and pore-water pressure for railway slope during rainfall can be predicted and the safety factor of railway slope can be expressed as the function of rainfall amount, namely rainfall index. Therefore, it is judged that this rainfall index can be a good tool for the rail-transport operation control.

• 한국과학교육학회지
• /
• 제13권3호
• /
• pp.310-316
• /
• 1993

One of the major characteristics in misconceptions is the stability over time. However, the concept of stability has not been defined clearly yet even though some trials to quantify the stability has been done. In this study, the researcher tried to establish a stability index of students' misconception for the quantification. In this study, the stability of a misconception was defined using mean correct choice (MC), the slope of correct choice (C), mean incorrent choice(MI) and the slope of incorrect choice(I) as follows; I=1/3 (1-C) (1+I)(1-MC)(1+MI). The index developed in the study was examined using artificial data. In this study, the index seemed to represent the charicteristics of the stability inferred by theoretically. This means the index developed in this study has some validity for the time being. Howerever, since artificial data were used to exame the index, it showed be reexamined using real data in the future study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.129-136
• /
• 2005

The deterministic analysis method has generally used to evaluate the slope stability and it evaluates the slope stability with decision value that is a representative value of design variables. However, one of disadvantages in the deterministic approach is there is not able to consider the uncertainty of soil strength properties, even though it is the biggest influential parameter of the slope stability. On the other hand, the limit state design(LSD) can take a consideration of uncertainties and computes both the reliability index and the probability of failure. LSD method is capable of overcoming the disadvantages of deterministic method and evaluating the slope stability more reliably. In this study, both the mean value and standard deviation of the internal land's representative soil strength properties applied to process the LSD method. The major purpose of this study is to gauge the general applicability of the limit state design in soil slope and to weigh the comparative validity of the proposed partial safety factor. In order to reach the aim of this study, the partial safety factor and resistance factor which totally satisfied the slope's overall safety factor were calculated by the load and resistance safety factor design (LRFD).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.427-435
• /
• 2008

A reliability based slope stability assessment method is proposed and examined considering the variation of matric suction which is measured by a real time slope monitoring system. Mean value first order reliability method and advanced first order reliability method are used to calculate reliability indices of a slope. The applicability of methods is compared by applying them to the range of matric suctions measured by the real-time monitoring system. Sensitivity analysis is also performed to examine the contribution of random variables to the reliability index of slope. Finally, the proposed method is applied to a model slope. The results show that the reliability index of slope can be used for efficient slope management by quantifying the risk of slope in real time.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.225-232
• /
• 2009

Infiltration of rainfall causes railway slopes to be unstable and may result in failure. Basic relationship between the rainfall and stability of railway embankment is defined to analyze its stability by rainfall. An experimental study for defining of infiltration rate of rainfall into slope is conducted in the lab. The results of Rainfall infiltration show that rainfall infiltration is not equal to infiltration as like reservoir because rate of rainfall infiltration is controlled by slope angle. Based on these results, boundary condition of rainfall is altered and various numerical analysis are performed. The variation of shear strength, the degree of saturation and pore-water pressure for railway slope during rainfall can be predicted and the safety factor of railway slope can be expressed as the function of rainfall amount, namely rainfall index. And suggested rainfall index is compared with the rail transport operation control which is used in KORAIL. It is judged that this rainfall index can be a good tool for the rail-transport operation control.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.271-280
• /
• 2002

본 연구에서는 사면안정해석 수행과정에서 입력되는 지반강도정수의 불확실성이 최소 신뢰성을 갖는 임계 활동면의 추적에 미치는 영향을 정량화하기 위한 확률론적 사면안정해석기법을 소개하였다. 일반적인 공사 현장에서 실무자가 상당한 양의 실내 및 현장 시험을 통해 얻어질 수 있는 지반강도정수의 다양한 통계.확률적 정보를 항상 확보하여 그것들을 상당한 수준의 통계적 지식을 가지고 자유스럽게 이용하는 것은 현실적으로 불가능하다. 따라서 본 연구에서는 실무자가 쉽게 확률적인 개념을 이해하면서 사면안정해석을 수행할 수 있도록 기존의 결정론적 사면안정해석 기법에 공학적 확률해석 기법을 결합시키는 방안을 제시하였다. 미 공병단에서 개발한 UTEXAS 3라는 범용 사면안정 해석 프로그램을 이용하여 본 연구는 파괴확률 또는 신뢰지수라는 관점에서 제안한 확률론적 사면안정해석기법의 결과들을 도출하였다. 본 확률론적 사면안정해석기법은 사면안정의 안전율만을 고려하는 기존의 결정론적 사면해석 기법들 보다 더욱 종합적으로 사면안정의 신뢰성에 대한 결과를 제시하는 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.789-795
• /
• 2008

Slope stability is affected by various factors. For safety management of slopes, monitoring systems have been widely constructed along railway lines. The representative data from the systems are variations of ground profile such like ground water level and pore water pressure etc. and direct displacement measured by ground clinometer and tension wire sensor. Slopes are mainly effected by rainfall and rainfall causes the decrease of factor of safety(FOS). Because FOS varies linearly by the variation of ground water level and pore pressure, it has a weak point that could not define the time and proper warning sign to secure the safety of the train. In this study, alternative of FOS such as reliability index and probability of failure is applied to slope stability analysis introducing the reliability concept. FOS, reliability index, probability of failure and velocity of probability of failure of the slopes by variation of ground water level are investigated for setting up the specification of safety management of slopes. By executing case study of a slope(ILLO-IMSUNGLI), it is showed to be applied to specification of safety management.

• 자원환경지질
• /
• 제33권2호
• /
• pp.117-128
• /
• 2000

Regional evaluations of slope stability by the failure criterion and by environmental geological factors were conducted. The failure criterion is the general conditions for plane failure which consider the geometrical conditions between geological discontinuities and topographical slope planes. The factor focused in this condiction is dip and dip direction. Geostatics, named semivariogram was used for establishing structural domains in slope stability evaluation by the failure criterion. The influential range was calculated to 6 km in the case of dip direction of dominant joint set and 7 km in the case of dip of the same dominant joint set. Then applying this failure criterion to the study area produced a slope stability map using the established domains and slopes generated by TIN module of ARC/INFO GIS. This study considered another regional slope stability analysis. 5 failure-driven factors 9the unstable slope map, geology, engineering soil, groundwater, and lineament density) were selected and used as data coverages for regional slope stability evaluation by geoenvironmental factors. These factors were weighted and overlayed in GIS. From the graph of cumulatave area (%) and instability index, finding critical points classified the instability indices. The most unstable slopes are located in the southern area of Mt. Eorae, Dabul-ri, and the eastern area of Junkok-ri in the first area is plane failure. Also, the expected orientations of failure are 59/338 and 86/090 (dip/dip direction).

• 한국수자원학회논문집
• /
• 제45권7호
• /
• pp.643-656
• /
• 2012

최근 기후변화에 따른 집중호우의 증가 및 무분별한 유역개발에 의한 산사태 발생빈도 및 재해복구비용이 증가하고 있는 추세이다. 본 연구에서는 2011년 7월에 발생한 서울시 우면산 지역을 대상으로 뿌리 점착력을 고려한 GIS기반의 무한사면안정모형을 이용하여 사면안정해석을 수행하였다. 무한사면안정모형의 중요 매개변수인 습윤지수의 공간분포화를 위해 비 집수면적 개념을 도입하였으며, 세가지 기법(일방향 흐름기법, 다방향 흐름기법, 무한방향 흐름기법)를 이용하여 비 집수면적을 산정하고, 각 기법에 따른 대상유역내의 격자별 사면안전율의 변화양상을 분석하였다. 또한, 기존의 무한사면안정모형을 이용한 사면안정 해석에 일반적으로 적용되고 있는 공간집중형 습윤지수 결과와의 비교를 통하여 우면산 지역의 사면안정 해석의 차이점을 비교 분석하였다. 무한사면안정모형을 이용하여 산정된 사면안전율 분석결과, 거주지 주변의 절개지 부근과 산지정상부근의 급경사지에서 불안정 지역이 집중적으로 분포하고 있음을 확인하였으며, IFD와 집중형 습윤지수에 의한 불안정지역은 유사하게 나타난 반면, SFD와 MFD에 의한 불안정지역은 앞선 두 가지기법에 비해 작게 산정되었다.