• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.129-137
• /
• 2015

The objective of this study was to test the non-point source pollution (NPS) control by the vegetated ridge and silt fence through field monitoring. The experiment plots were established with three sizes which are 5 m width by 22 m length with 8 %, 3 % slope and 15m width by 15 m length with 6 % slope. Flumes with the floating type stage gages were installed at the outlet of each plot to monitor the runoff. For a rainfall monitoring, tipping bucket rain gage was installed within the experiment site. Water quality samples were monitored during the heavy rainfall occurred. The amount of rainfall from 4 monitored events ranged from 27.6 mm to 130 mm. The runoff reduction rate could vary depending on slope, soil, crop growth condition, rainfall amount, rainfall intensity, antecedent moisture condition, and many other factors. The runoff from vegetated ridge and silt fence treatment plots was 24.05 % and -8.28 % lower than that from control plot, respectively. The monitoring results showed that the average pollution loads reduced by vegetated ridge compared to control were BOD 36.62~53.60 %, SS 40.41~73.71 %, COD 39.34~56.41 %, DOC 49.08~53.67 %, TN 26.74~67.23 %, and TP 52.72~91.80 %; by silt fence compared to control were SS 41.73 %, COD 1.93 %, and TN 2.38 %. The paired t-test result indicated that the vegetated ridge and silt fence were statistically significant effect in SS load reduction, with a 5 % significant level. Monitored results indicated that vegetated ridge and silt fence were both effective to reduce the pollutant from the field surface runoff.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.367-374
• /
• 2009

Every year there are great socio-economic loss and damage caused by landslides in steep slopes. According to recent statistics, the percentage of casualty due to breakdown in steep slopes was 27.3% of all natural disasters occurring over the past decade($1998{\sim}2007$). Therefore, the nationwide scale survey on the landslide susceptibility was made to recognize the status quo for appropriate troubleshooting measure against the collapse of steep slopes. Nevertheless, few dent that the data collected is not sufficient to grasp the overall understanding of the onsite situation due to lack of spatial information. As a result, the study aims to develop a program enabling to send on site topological data and prefixed data-gather criteria directly to the central management server in real-time basis. It will be conducted through mobile devices and portable GPS system, accordingly. This program is expected to be implemented as an efficient application tool of slope spatial information acquisition.

• Korean Journal of Environment and Ecology
• /
• v.22 no.2
• /
• pp.119-127
• /
• 2008

This research managed to establish the space information on incidence factors of landslide targeting Bukhansan National Park and aimed at suggesting a basic data for disaster prevention of a landslide for the period to come in Bukhansan National Park through drawing up the map indicating vulnerability to a landslide and ecological risks by the use of overlay analysis and adding-up estimation matrix analysis methods. This research selected slope angle, slope aspect, slope length, drainage, vegetation index(NDVI) and land use as an assessment factor of a landslide and constructed the spatial database at a level of '$30m\times30m$' resolution. The analysis result was that there existed high vulnerability to a landslide almost all over Uidong and Dobong valleys. As for ecological risks, Dobong valley, Yongueocheon valley, Jeongneung valley and Pyeongchang valley were analyzed to be higher, so it is judged that the impact on a landslide risk should be also considered in time of establishing a management plan for these districts for the time to come.

• Journal of the Korean Geographical Society
• /
• v.39 no.2
• /
• pp.283-296
• /
• 2004

More than 0.5 percent of land in Korea is used for cemetery and the rate is growing in spite of the increase in cremation these days. The systematic management of tombs may be possible through the ‘Feature Extraction’ method which is applied to the high-resolution satellite imagery. For this reason, this research focused on finding out the radiometric characteristics of tombs and the classification of them. An IKONOS image of northwest areas of Seoul with 8km x 10km dimension was analyzed. After sampling 24 tombs in the study area, the statistical radiometric characteristics of tombs are analyzed. And tombs were classified based on the criteria such as landscape, NDVI, and cluster analysis. In addition, it was investigated if the aspect or slope of the terrain influenced to the classification of tombs. As a result of this research, authors find that there is similarity between the classification tv NDVI and the classification through cluster analysis. And aspect or slope didn't have much influence on the classification of tombs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.372-381
• /
• 2019

In this study, the National Disaster Management System (NDMS) was analyzed to evaluate the disaster impact assessment standards for steep slopes. Problems in the assessment methods and systems were discovered, which could be reasons for poor reliability. The disaster-risk evaluation index needs improvement to evaluate various types of retaining walls, such as concrete/reinforced soil walls and reinforcing stone masonry. Additionally, using the same score for overturning, bulging, and efflorescence could be reasons for poor reliability, and different weighting factors are needed. Assessment methods are needed to subdivide the social influence evaluation index while considering environmental conditions of steep slopes, such as railroads and reservoirs. For the evaluation of steep slopes, standards for start and end points of steep slopes should be created for effective management, and disaster impact assessment needs to be performed after redevelopment from an advanced index for protection and reinforcement. These problems were derived from a current evaluation system, so a disaster impact assessment is necessary to supplement the results of this study.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.4
• /
• pp.81-90
• /
• 2005

This study aimed to address problems and suggest solutions in applying seed mixture design criterior of the slope revegetation works according to "The guidelines of Slope revegetation design and construction" proposed by the Ministry of Construction and Transportation. To do this, the planting thickness was set to be the same 2cm while the composition of seeds was made different, which was planted in artificial slopes and fields. The main results were summarized as follows. In the test, when applying the provisional standards of the plant mixtures proposed by the Ministry of Construction and Transportation, tree seeds and native plants were found poor coverage effect in the early stage in all test plots due to introduced grasses. This was because introduced winter grasses which grew well in the early stage, could grow densely, so it might hamper the growth of other plants. Therefore, it was found desirable that standards for seed mixing should be adjusted down by 10% and the ratio of introduced grasses in the mixture should be lowered to 25% while native plants should increase to 20-25%.

• Asia pacific journal of information systems
• /
• v.25 no.3
• /
• pp.563-578
• /
• 2015

Forecasting daily box-office performance is critical for planning the distribution of marketing resources, and by extension, maximizing profits. For certain movies, the number of viewers increases rapidly at the beginning of their theatrical run, and the increments slow down later. Other movies are not popular in the beginning, but the audience sizes grow rapidly afterward. Thus, the audience attendance of movies grow in different trajectories, which are influenced by various factors including marketing budget, distributors, directors, actors, and word of mouth. In this paper, we propose a method for predicting the daily performance trajectory of running movies based on the hierarchical linear model. More specifically, we focus on the effect of online word of mouth on the shape of the growth curves. We fitted the mean trajectory of the cumulative audience size as a cubic function of time, and allowed the intercept and slope to vary movie-to-movie. Moreover, we fitted the linear slope with a function of online word of mouth predictors to help determine the shape of the trajectories. Finally, we provide performance predictions for individual movies.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.13 no.2
• /
• pp.207-221
• /
• 2002

Wolaksan is a national park which has beautiful scenery with exposed rocks. The mountain is 1097 meters high and has 3 tops which are Jungang(the center), Arae(the lower part), Jjokduri. The highest point of the vertical cliff is 150m from the earth and the total circumferences of three tops is about 4km. These tops are easy to break by grains because they are from sedimentary rocks. Wolaksan is a bad mountain because the area is a Mosikjuk rocky area. However, the area around Wolaksan is thicky wooded and has many achievements and it makes good scenery. From top to southeastern, there are vertical cliff, The tops are originally from one but these are divided by partial weathering corrosion. The slide of path to Wolaksan is about 70。. The lower part of the mountain from Shinroksa to top has a gentle slope but there are a steep slope from the middle. Especially, the area has many rocks. The rocks of Wolaksan are almost granitic-gneiss or metamorphic rocks so it often fall down. Because of these fallen rocks, its valleys have great landscapes. The size of rock is less than 60cm. The landscapes of valleys such as Songgye, Dukju, Yonghwa are the main natural tourism resources.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.2
• /
• pp.15-21
• /
• 1983

Preparing for treatment and management of the emulsified fuel oil which will be generalized henceforth, this paper is an attempt to examine the viscosity-temperature characteristics of emulsified heavy fuel oil which is mixed with water and emulsifier in various mixture ratio by mechanical mixer. The experimental results are summarized as follows: 1. The viscosity-temperature characteristics of the emulsified C & B grade heavy fuel oil mixed with water of same or less weight, is changed according to log.log(v+0.6)=b-3.8log T. 2. The emulsifier has to be added to the emulsified A grade heavy fuel oil mixed with water of same or less weight, because it is instable. Especially if the emulsifier is sodium stearate, it is added more than 0.3% of the weight of oil and water. 3. In the emulsified A grade heavy fuel oil mixed with water and emulsifier, the higher the ratio of water addition becomes, the higher the viscosity is and the more the viscosity-temperature slope decreases. But the higher the ratio of emulsifier addition is, the more the viscosity-temperature slope increases. In this case, the linearity of viscosity-temperature characteristic curve is poorer than that of B and C grade heavy fuel oil. 4. In the emulsified A grade heavy fuel oil mixed with emulsifier of 0.3% or less, the emulsion type is O/W type when water addition ratio is 40%, but it is W/O type when it is 10%, 20%, 30% and 50%.

• Geomechanics and Engineering
• /
• v.12 no.6
• /
• pp.1021-1046
• /
• 2017

The assessment of slope stability is an essential task in geotechnical engineering. In this paper, a three-dimensional (3D) finite element analysis (FEA) was employed to investigate the performance of different shear pin arrangements to increase the stability of a soil block resting on an inclined plane with a low-interface friction plane. In the numerical models, the soil block was modeled by volume elements with linear elastic perfectly plastic material in a drained condition, while the shear pins were modeled by volume elements with linear elastic material. Interface elements were used along the bedding plane (bedding interface element) and around the shear pins (shear pin interface element) to simulate the soil-structure interaction. Bedding interface elements were used to capture the shear sliding of the soil on the low-interface friction plane while shear pin interface elements were used to model the shear bonding of the soil around the pins. A failure analysis was performed by means of the gravity loading method. The results of the 3D FEA with the numerical models were compared to those with the physical models for all cases. The effects of the number of shear pins, the shear pin locations, the different shear pin arrangements, the thickness and the width of the soil block and the associated failure mechanisms were discussed.