• 수산해양기술연구
• /
• 제44권4호
• /
• pp.273-281
• /
• 2008

In this study, the effect of slope length and angle at the entrance to fishing pots on the size of captured shrimp was examined to determine the optimal design of pots for use in Hokkaido, Japan. The purpose of the current study was to optimize the design of shrimp pots to allow greater control over the size of captured individuals for the purposes of shrimp resource management. Tank experiments were conducted to determine the optimal slope length and slope angle by analyzing the sizes of shrimp entering 10 model pots with combinations of five different slope lengths on slope angle of current shrimp pot, and five different angles on slope length of current shrimp pot. The results showed that, as the slope length of the pot increased, the size of individuals which entered the pot increased. In addition, as the slope angle was elevated in each of the five different slope angle treatments, the size of individuals entering was also increased.

• 대한치과교정학회지
• /
• 제22권4호
• /
• pp.869-880
• /
• 1992

The purpose of this study was to evaluate the difference and relationship between the slope of articular eminence and the inclination of upper and lower incisor teeth, which are related to the functional stability of occlusion in mandibular protrusion, according to Ricketts' facial types, by the use of lateral cephalogram and SAM2 articulator in 68-adult normal occlusion without tooth missing, orthodontic treatment and occlusal equilibration. The results of this study were as follows : 1 . The angle of articular eminence slope to occlusal plane in brachyfacial type was steeper than that in dolichofacial type, but the angle of articular eminence slope to SN plane and FH plane was not different between facial types. 2. The upper incisor axis in dolichofacial type was steeper than that in brachyfacial type, but lingual surface slope of upper incisor was not different between facial types. 3. In all samples there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane, FH plane and occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to occlusal plane. 4. In all samples there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane and FH plane. 5. In all samples there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane. 6. In all samples and facial types there was a negative correlation between MP to 1 axis and condylar incisal angle.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.179-184
• /
• 2005

Shear strength parameters obtained from filed survey are important factors in the analysis of slope stability. In this study, sensitivity analysis was performed to evaluate the effect of input parameters on the analysis of slope stability. The input parameters selected for sensitivity analysis were slope angle, cohesion, and friction angle. Monte-Carlo Simulation method was used for calculating input parameters and the factor of safety was computed by means of limit equilibrium method. A rock slope, which has failed in the field, was used for the sensitivity analysis in the analysis of slope stability. The result of analysis shows that the factor of safety of the rock slope was a little low. From partial correlation coefficient(PPC) of input parameters determined from the sensitivity analysis, slope stability was dependant on cohesion and slope angle. The effect of friction angle was lower than that of cohesion and slope angle on slope stability.

• Fisheries and Aquatic Sciences
• /
• 제12권4호
• /
• pp.342-349
• /
• 2009

The purpose of the current study was to optimize shrimp-pot design to allow greater control over the size of captured individuals for the purposes of shrimp resource management. Tank experiments were conducted to determine the optimal slope length and slope angle by analyzing the sizes of shrimp that entered 25 model pots with combinations of five different slope lengths and five different angles. Shrimp size was measured using carapace length. The results showed that as the slope angle of the pot increased, the size of individuals that entered the pot increased. Furthermore, as the slope length increased, each of the five different slope angles of the pot increased, and the size of individuals entering also increased. The data indicated that the optimum pot design for reducing the capture of immature individuals had a $75^{\circ}$ slope angle and a 35.4 cm slope length.

• 터널과지하공간
• /
• 제18권6호
• /
• pp.447-456
• /
• 2008

노천광산에서 사면설계는 안정성과 경제성 측면에서 동시에 접근하여 결정해야 한다. 또한 일반 도로나 철도 연변의 사면과는 달리 대부분 지보나 보강없이 굴착해야 하기 때문에 사면각도가 가장 중요한 설계 변수이다. 본 연구에서는 인도네시아 파시르에 위치한 노천채광방식의 대규모 석탄광산 사면에 대하여 안정성 측면에서의 사면 각도 및 한계사면높이를 결정하였으며 이러한 설계가 가지고 있는 불확실성을 보완할 수 있는 계측 및 계측자료 해석을 수행하였다. 연구 결과, 사면각도(Overall Elope angle) $30^{\circ}$를 유지하는 경우 안전율 1.5를 확보하는 최대개발심도는 $353{\sim}438m$로 계산되었으나 강도정수에 대한 민감도분석결과를 고려할 때 사면높이는 300m를 초과하지 않는 것이 바람직하다. 또한 변위계측자료에 대한 역변위속도 분석 결과가 현장사면 사례와 잘 일치하여 이 방법을 통해 사면의 불안정성 및 파괴시기를 대략적으로 예측할 수 있을 것으로 판단된다.

• 한국운동역학회지
• /
• 제31권1호
• /
• pp.44-49
• /
• 2021

Objective: The purpose of this study was to analyze kinematic variables according to ground slope angle during golf putting. Method: 26 collegiate golfers (age: 22.54±2.15 kg, height: 174.64±6.07 cm, weight: 71.35±9.27 kg, handicap: 5.11±4.50) were participated, and 8 motion capture cameras (250 Hz), Nexus, and Kwon3DXP software were used to collect data. It was performed repeated measures ANOVA and Bonferroni adjustment. Alpha set at .05. Results: Body alignments were not significantly different at address. Putter head trajectory and loft angle were significantly different, and AP direction of acceleration of putter head was significantly different. However, ML and SI direction of acceleration of putter head were not significantly different. Conclusion: Therefore, it was identified that ground slope angle was affected the kinematic variables during putting, and it will be performed that correlation analysis between putting success rate and kinematic variables according to ground slope angle during golf putting.

• 한국터널공학회:학술대회논문집
• /
• 한국터널공학회 2005년도 학술발표회 논문집
• /
• pp.359-371
• /
• 2005

The Cutting slope is to be minimized when a tunnel meets the contour of slope terrain at a right angle around its portal. However, a tunnel portal has been generally installed at a right angle to the longitudinal axis of a tunnel with no consideration of the intersection angle with the slope terrain. This sometimes tended to cause huge cutting slope that resulted in many disadvantage in terms of safty, economy and environment. Therefore, the minimization of cutting slope is studied by taking the intersection angle into account, and the result is compared with that by the conventional method. In addition a design method for the inclined portal to the tunnel axis is proposed through 3D-FEM analysis, also the applicable ground condition is suggested.

• Imaging Science in Dentistry
• /
• 제37권1호
• /
• pp.19-26
• /
• 2007

Purpose : To examine whether the maxillofacial skeletal morphology correlates with the condylar position and the anatomic characteristics of articular eminence using measurements of lateral cephalometric radiographs and individualized sagittal temporomandibular joint (TMJ) tomographs. Materials and Methods : I compared measurements of 202 TMJs of 101 orthodontic patients of Kangnung National University Dental Hospital. 1 used Pearson's correlation for comparison of the measuring values in lateral cephalometric radiographs and individualized sagittal TMJ tomographs. Results : Large occlusal plane angle tendency showed decreased width of posterior eminence slope, decreased depth of articular fossa and decreased posterior slope angle of eminence. Large mandibular plane angle tendency showed decreased superior joint space, decreased depth of articular fossa and decreased posterior slope angle of eminence. Large genial angle tendency showed decreased depth of articular fossa, decreased posterior slope angle of eminence and anterior position of condylar head. Large anterior facial height and large posterior facial height tendency showed increased width of posterior slope of eminence, increased depth of articular fossa, increased posterior slope angle of eminence and posterior position of condylar head. Conclusion : Maxillofacial skeletal morphology has correlation with the anatomic characteristics of TMJ. Individualized sagittal TMJ tomographs can provide useful information for anatomical analysis of TMJ.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.75-82
• /
• 2005

사면 안정해석은 현장 조사로부터 얻어지는 지반강도 정수의 역할이 매우 중요한 인자로 작용한다. 본 연구에서는 사면안정성 분석에서 입력변수들에 대한 상대적인 평가를 위하여 민감도 분석을 수행하였다. 설정된 입력 변수들은 사면의 경사, 점착력, 내부마찰각의 3가지 종류로 선별하였다. 사면안정해석은 기본적으로 한계평형으로 해석하였으며 수집된 현장자료를 이용하여 분석한 결과 확률변수들은 정규분포를 나타내는 것으로 나타났다. 몬테카를로 시뮬레이션을 이용하여 입력변수들을 발생시켰으며 붕괴된 암반사면을 이용하여 민감도 분석을 실시하였다. 분석결과 암반사면의 안전율은 예상보다 낮게 나타나는 것을 알 수 있었다. 민감도 분석 지수(PCC)를 이용하여 분석한 결과 사면 안전율에는, 점착력과 사면 경사가 매우 민감한 영향을 미치는 것으로 나타났으며 내부마찰각은 상대적으로 낮은 민감성을 띠는 것으로 분석되었다.

• 화약ㆍ발파
• /
• 제39권3호
• /
• pp.35-43
• /
• 2021

사면의 최적화(slope optimization)는 오픈핏(open pit) 노천광산에서 사면의 경사를 높여 추가적인 광석을 채굴하고 최대한의 이익을 얻는 것이 그 목적이다. 대형 노천 광산들은 선진화된 기술을 도입하여 사면의 안정성을 확보할 수 있는 수준에서 광산의 사면을 높이려는 노력을 하고 있다. 본 기술보고에서는 사면 최적화의 동향과 실제 광산의 사례들을 소개하고자 한다.