• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.137-144
• /
• 2015

Development of the yarn sorting equipment (khonhook) by slide way due to the principle of engineering that cause of workers on the long of motion time. The data was collected from the weaving group Ban Nongkok village, Nakornratchasima Province, THAILAND. According to the study, the step of yarn sorting (konhook) was one of the steps that affect long of motion time. The problem was the inadequate capacity equipment. The objective of research was to study and develop the yarn sorting equipment (konhook). The fabric used in the study was 64 meters in length and 1 meter in width. Researchers studied the processes the yarn sorting (konhook) which it consists of seven sub steps, 1) the thread tube setting, 2) yarn bunching, 3) tying a knot at the end of yarn, 4) looping the yarn into a pillar, 5) sorting the yarn (konhook), 6) crossing pillars and 7) taking out the yarn. Researchers focused on studying yarn sorting process (konhook) by designing and creating a device for yarn sorting (konhook) for reducing yarn sorting (konhook) time by the original method performance indicators. The results found that the developed yarn sorting equipment (konhook) ) by slide way could reduce working time from 7.24 minutes to 6.08 minutes of the original equipment yarn sorting (konhook). This means it could make the process 16.02 % faster. This also helps reducing the distance of workers' movement from 2,234 meters to 8 meters. This is 99.64 % shorter.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.251-256
• /
• 2009

In this research, we experimentally studied flow characteristic by applying PIV measuring techniques which could measure the point velocity of all flow field and measuring the unsteady velocity of surrounding disk generated in a short time. Time range of great velocity change following quick closing of the slide valve was within 0.1s and the cycle was presumed to be 0.12s as a result of comparison study between the result of point flow field and of existing pressure change. Also, surrounding disk flow inside the circular pipe was closed from the upper part and flow road was getting narrow and advanced to the lower part incidentally quickly there was a tendency that the size of the flow back velocity to the upper part immeadiately after the closure decreased to 4/120s and increased again. There was flow back velocity component in y/D=0.2 lower part by the influence of flow back to the upper part after complete closure and the vortex flow of 0.2D-size near y/D=0.7, x/D=-0.3 was observed.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.18 no.1
• /
• pp.83-86
• /
• 2012

Background: The research examined the effect of a scapular stabilizing exercise on shoulder pain, active range of motion (AROM) and changes in the position of the shoulder blade of patients with frozen shoulder. Methods: General physical therapy and a scapular stabilizing exercise were applied to a 53-year-old female patient with frozen shoulder three times a week for four weeks. Before and after the therapy, measurements were made on the visual analog scale (VAS) and of the AROM, and a lateral scapular slide test was conducted. Results: Following the therapy, VAS fell from 7 to 3. Before therapy, flexion, abduction, internal rotation, and external rotation recorded $133^{\circ}$, $102^{\circ}$, $45^{\circ}$, and $53^{\circ}$ respectively; after the therapy they increased to $150^{\circ}$, $123^{\circ}$, $55^{\circ}$, and $65^{\circ}$ respectively. The lateral scapular slide test showed sliding distances before therapy of 8.5cm at $0^{\circ}$, 9.2cm at $45^{\circ}$, and 11.3cm at $90^{\circ}$; after therapy, the distances decreased to 6.8 cm at $0^{\circ}$, 8.2 cm at $45^{\circ}$, and 9cm at $90^{\circ}$. Conclusion: The scapular stabilizing exercise was effective in alleviating shoulder pain, increasing AROM, and reducing changes in the position of the shoulder blade of frozen shoulder patients.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.2
• /
• pp.1-10
• /
• 2001

The purpose of this study was to investigate factors and variables which have significant effects on landscape satisfaction of urban pedestrian road in Bun-dang new town and to suggest basic information for urban pedestrian road design. These works consist of two phase. First, we tested the Hye-Cheon college students' degree of landscape satisfaction for 37 spots of urban pedestrian road and then selected 10 sports slide by the Sturges' formula. Second, we analysed factors and variables on landscape satisfaction of urban pedestrian road using the semantic differential scale method and then processed using descriptive analysis, factor analysis and multiple linear regression analysis. The major findings of this study can be summarized as follows; 1) The difference of landscape adjectives between the highest score of landscape satisfaction slide and the lowest score landscape satisfaction slide were diversity of vegetation, plenty of the shade of a tree, naturalness and cleanness. 2) Diversity of vegetation, width of road, freedom of danger and diversity of environment can be significant variables of major effects on landscape satisfaction of urban pedestrian road by using the multiple linear regression analysis. 3) Factors covering the landscape satisfaction of urban pedestrian road have been found to be Environment of urban pedestrian road and Constitution of urban pedestrian road. By using the Varimaxs' rotation factor analysis for the number of factors' cumulative percentage has been obtained as 64%. 4) Environment of urban pedestrian road and Constitution of urban pedestrian road can be significant factors of major effects on landscape satisfaction of urban pedestrian road by using the multiple linear regression analysis. In conclusion, the landscape satisfaction factors and variables of urban pedestrian road need to be considered in plan or design the urban pedestrian road.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.2
• /
• pp.119-129
• /
• 1986

Disappearence of the trichlorfon (Dipterex) in the forest, following aerial to control Agelastica coerulea B., were studied by sampling deposits on slide glasses, soils, water, and leaves, and analysing with a gas chromatograph equipped with an electron capture detector. By analysing the amount remained on slide glasses, it was shown that the pesticide was adequately sprayed and nearly all deposit was lost in a day. The amount deposited under the tree was about 1/100 of the amount at an exposed site. Concentration of trichlorfon in creek water was 10 to 100 times as high as the acute toxic level to zooplankton for 6 to 24 hours, The rain could recontaminate the stream water up to the toxic level. Loss rate of trichlorfon from soils showed variations by sampling sites and was generally slower than from slide glasses. Amount deposited on leaves were less than the calculated or expected amount. The loss from leaves were similar to that from soil.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.3
• /
• pp.238-245
• /
• 2012

This paper presents a sensorless speed control of a 2-phase switch reluctance motor(SRM). The proposed sensorless control scheme is based on the slide mode observer with parameter compensator to improve the estimation performance. In the stand still position, the initial rotor position is determined by pulse current responses of each phase windings and the current difference. In order to determine an accurate initial rotor position, the two initial rotor positions are estimated by the difference of the pulse currents. From the stand still to the operating region, a simple open loop control which determines the commutation sequence by the pulse current of the unexcited phase winding is used. When the motor speed is reached to the sensorless control region, the estimated rotor position and speed by the slide mode observer are used to control the SRM. The flux calculator used in the slide mode observer is designed by phase voltage and the voltage drops in the phase resistance of the winding. The accuracy of the flux calculator is dependent on the phase resistance. For the continuous update of the phase resistance, current gradient at the inductance break point is used in this paper. The error of the estimated rotor position at the current gradient position is used to update the phase resistance to improve the sensorless scheme. The proposed sensorless speed control scheme is verified with a practical compressor used in home appliances. And the results show the effectiveness of the proposed control scheme.

• Physical Therapy Korea
• /
• v.24 no.4
• /
• pp.29-37
• /
• 2017

Background: The serratus anterior (SA) muscle is one of the important muscles in the upward rotation of the scapula when the arm is raised. Insufficient muscle activity of the SA can cause deformation of the shoulder rhythm resulting in shoulder pathology. Objects: This study intends to compare SA and upper trapezius (UT) activity during the conventional wall-slide and push-up plus exercises for SA muscle strengthening and the scapular upward rotation (SUR) exercise. Methods: A total of 30 subjects participated in this study, and we measured the muscle activity of the SA and UT muscles during the wall-slide, push-up plus and SUR exercises. The one-way repeated ANOVA was used to compare SA and UT muscle activities during the 3 exercises. Results: During the SUR exercise, SA muscle activity was 79.88% maximum voluntary isometric contraction (MVIC), which was significantly higher than its activity during the other 2 exercises. The UT muscle activity was 47.53 %MVIC during the SUR exercise, indicating a significantly higher UT muscle activity than during the other 2 exercises. Conclusion: These findings suggest that the SUR exercise can maximize SA muscle activity to strengthen the SA while keeping UT muscle activity at an appropriate level.

• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.181-192
• /
• 1994

There have been many different theories on the etiology of temporomandibular disorders(TMDs). The objective of the study was to investigate the effects of occlusal fctors and recent life event changes as prediposing fctor on the development of temporomandibjlar disorders. To evaluate the above predisposing factor, the author used T-scan system(Tekscan Co. U.S.A.) for quantitative occlusal analysis, clinical examination for occlusal state and Social Readjustment Rating Scale(SRRS) for recent life event change units (LCU). 63 patients with TMDs and 57 patients with malocclusion presented at Wonkwang University Dental Hospital participated in this study. The subjects were grouped by Angle's classification and presence of absence of TMDs and parafunctional oral habits. Data gained with regard to contact number, contact force, contact time, occlusal state(number of total teeth and occluding teeth, overjet, overbite) and occlusal interferences (protrusive posterior contact, nonworking side interference, and RCP-ICP slide) and recent life event changes. The data were processed and analysed by SAS statistical package program, The results of this study were as follows : 1. There were no significant differences on both quantitative occlusal contact analysis and occlusal state between TMDs group and Angle's malocclusion group. Also, there were no differences among the Angle's classifications. But amount of overjet in TMDs group were more greater than that of malocclusion group. 2. There was no difference on protrusive posterior contact, and balancing contact between TMDs group and Angle's malocclusion group. Premature contact was more frequent in malocclusion group, but RCP-ICP slide was more frequent in TMDs group. And RCP-ICP slide was more freqent in Angle's class II malocclusion than Angle's I or III malocclusion. 3. Life changes units in TMDs group were higher than those in malocclusion group. And recent life change units in group with parafunctional oral habit were higher than those in group without parafunctional oral habits. Clenching was the most common habit among parafunctional oral habits.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1019-1025
• /
• 2003

There are many kinds of seam trackers in the industrial welding field. We are proposed the contact seam tracking sensor applying strain gauges kind of contact sensor that mostly used in welding part now. For this seam tracking experiment, we made the strain gauges sensor by ourselves and tested how well the sensor tracks the seam. The experiment device consist of strain gauges sensor, amplifier circuit of strain gauges signal, saw wave generator, MOSFET power diving circuit and X-Y slide by moved DC motor. The tracking areas are X-Y planes(left, right, up and down) and the change of strain gauge resistance causes to move DC motor that connected to X-Y slide. As a result of experiment, we confirmed that the strain gauges sensor tracks a seam well, and X-Y slide DC motor was controlled by PWM control.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.73-79
• /
• 1968

The resolving capacities of xanthophyll pigments on thin-layers of Silica Gel, Hyflo super-Cel, and Micro-Cel C with varying concentrations of acetone in petroleum ether as the developing solvent were compared. The results showed that the resolving capacity of Micro-Cel C thin-layer was superior to others and satisfactory for the separation of leaf carotenoids in clearly separated six bands; carotenes, lutein-zeaxanthin, antheraxanthin, violaxanthin, an unidentified band, and neoxanthin, when it was developed with $13\%$ acetone-petroleum ether solution for 15 to 20minutes in an unsaturated chamber. Adhension of Micro-Cel C to glass was adequate without binder. Calcium sulfate used as a binder appeared to inactivate the resolving capacity of Micro-Cel C. Removing an about 0.2cm-wide layer on bo side of thin-layer slide helped to prevent 'edge effect' which gave tailing and faster solvent ascending along the side than the center. An adequate thickness of thin-layer was obtained when a 3 ml aliquot of the suspension in which l0g powdered Micro-Cel C was suspended in 75 ml distilled water was coated on a $2\times20cm$ glass slide.