• The Journal of Engineering Geology
• /
• v.11 no.3
• /
• pp.295-301
• /
• 2001

Geological and geophysical surveys were performed to examined the cause of the rock-mass slide occurred at the opening site of the Wanglim tunnel of the Seoul-Pusan High Speed Railway. The results of geophygical survey and geometrical analysis for the geological structures indicate that the rock-mass slide was triggered by the heavy rainfall which increases the groundwater level and results in high pore pressure in the N60$^{\circ}$ E-trending major fractured zone of the slope, and that the foliation dipping toward the vertical open face of the slope acted as a main sliding plane during movement.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.487-489
• /
• 2002

Recently, mobility and accessibility occurs for the elder and the handicapped in the aging problem. In this paper, we analyze the dynamics of slide-up seat, which helps to care the handicapped passenger in and out the automobile when we enjoy trip with the families including the elder and handicapped. We check the trajectories of slide-up seat inside and outside car to protect its corrosion and the stress at the joints of mechanical structure. Those can be helped to keep the safety and accuracy of the multiple dynamic systems for precision quality assurance in mass production.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.1
• /
• pp.7-10
• /
• 2002

$TiO_2$ thin films were prepared by coating and subsequent pyrolysis processes using Titanium-naphthenate as a raw material. $TiO_2$ thin films were made by spin-coating technique on the glass substrates, and heat treated at 45$0^{\circ}C$, The transmittance, refractive index, crystallinity and surface morphology of the $TiO_2$ thin films were measured by UV/Vis spec trophotometer, x-ray diffractometer and scanning electron microscope. $TiO_2$thin films on the slide glass showed the trans mittance of 70-90% and refractive index of 2.6 at 420 nm. The results of XRD and SEM showed that the $TiO_2$ thin films exhibited the anatase phase and the thread-like surface morphology.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.312-320
• /
• 1998

The purpose of this study is to investigate and compare the validity of various visual simulation methods with or without sounds and videos of the landscapes The landscape evaluation through such media as color slide, color slide with sounds, video and video without sounds are compared with on-site evaluaton of the landscape. The results are as follows : ·Video can generally convey the feelings for the real landscapes better than traditonal mathod, i.e., slide without sounds. ·When the sources of sounds are dominant in the view, there are great differences in responses among 4 different media and video can convey the feelings for real landscapes on site most successfully. ·There are slight differences by landscape types ; in mixed landscapes, there are higher correlations between the on-site estimaton and estimations through media ; in natural landscapes, video can reflect the feelings for real landscapes on site better. ·There is little difference between two shooting methods, fixed shot and pan shot. These results suggest that traditional visual simulation, with slides or photographs, could not reflect the real landscapes in certain situations and the visual simulation method with sounds and videos should be used in such situatios to represent the real landscape better. Especially, when the whole and comprehensive evaluatio of the landscape properties is important, the visual simulation with sounds and videos should be used. And simulation techniques with sounds and videos should be further developed for practial applications.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.962-966
• /
• 2004

Ball screw feed drive systems have been broadly used in machine tools or precision automatic feed systems. Recently, modern machine tools require high speed and high precision and drive system to achieve high productivity. Unfortunately, a feed drive system, even though it was optimum designed, may experience severe transient vibrations during high-speed operation if its feed rate control is unsuitable. A rough feed rate curve having discontinuity in its acceleration profile causes a serious vibration problem in the feed slide system. This paper presents a feed rate optimization of a machine tool feed slide system, which is driven by a ball screw, for its minimum vibrations. Firstly, a 6-degree-of-freedom lumped parameter model was proposed for the vibration analysis of a ball screw driven machine tool feed drive system. Next, a feed rate optimization of the feed slide was carried out for minimum vibrations. The feed rate curve optimization strategy is to find out the most appropriate acceleration profile having finite jerk. Of course, the optimized feed rate should approximate to the desired one as possible. A genetic algorithm with variable penalty function was used in this feed rate optimization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.107-114
• /
• 2017

A turbocharger is an engine supercharger that is driven by exhaust gas. It improves the output and fuel efficiency by increasing the charging efficiency of the mixture gas, which is achieved by changing the rotatory power of the turbine connected to the exhaust passage. It is important to control the supercharging for this purpose. A nozzle slide joint is one of the core parts. Austenitic stainless steel is currently used as the material for this part, and its excellent mechanical properties include high heat resistance and corrosion resistance. However, because of its poor machinability, there are many difficulties in producing products with complicated shapes. Machining is used in the production of nozzle slide joints for high dimensional accuracy after metal powder injection molding. As design variables in this study, we investigated the sintering temperature, product stress, deformation rate, radius of curvature of the punch, and angle of the chamfer punch, which are related to the strain and shapes. The goal is to suggest a forming process using Nitronic 60 that does not require machining to manufacture a nozzle slide joint for a turbocharger. Accordingly, we determined the best process environment using finite-element analysis, the signal-noise ratio, and the Taguchi method for experiment design. The relative density and hydrostatic pressure of the final product were in accordance with the results of the finite element analysis. Therefore, we conclude that the Taguchi method can be applied to the design process of metal powder injection molding.

• 한국전자현미경학회:학술대회논문집
• /
• 1996.05a
• /
• pp.17-17
• /
• 1996

• The Journal of the Korean dental association
• /
• v.32 no.5 s.300
• /
• pp.319-326
• /
• 1994

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.325-326
• /
• 2009

• The Journal of the Korean dental association
• /
• v.27 no.7 s.242
• /
• pp.592-595
• /
• 1989